0

Hifiberry DAC+ does not come back after hard shutdown

jacobacci

November 09, 2022 12:46

None

Follow

I am using a RP3+ with a DAC+ board. The RP3+ is connected to a switched 220V socket. I turn the unit on and off via the switched socket.

When I turn the RP3+ off and later back on, hifiberryOS most of the time does not boot up correctly. I cannot find the config page in the browser. I get a message in the browser that the connection was refused:

However the RP3+ seems to be alive, I can ping iton the correct IP address:

If I put a new hifiberryOS image on the SD card, everything is back to normal. Is this expected behaviour?

thanks for any hints

 

 

 

• Facebook
• Twitter
• LinkedIn

4 comments

• 0
  
  HiFiBerry team November 10, 2022 08:01

  This is not the normal behavior. Can you login via SSH?

• 0
  
  jacobacci November 10, 2022 08:07

  I will try that when I return to the Chalet around Christmas. For the time being I have shut down hifiberryOS / RP3 via the web interface before turning off the switched socket. That seemt to work

• 0
  
  HiFiBerry team November 10, 2022 08:08

  This is strange as the system does seem to boot if you can ping it. It's probably best to connect a screen and check what's going on during the boot phase.

• 0
  
  jacobacci November 10, 2022 09:48

  I will connect a screen and come back