Hi I have 2 CX100 and I want to set them up as a Stereo pair how do I do that ??? I. have a Beogram 4500 (with amp build in) how do I connect that to the Beocreate ?? It Impossible to buy a Raspberry Pi anywhere but I have an old Pi Zero laying around as It has no Pin connections how do I at it to the Beocreate..... as it is supported !!!
Thanks
The Beogram 4500 is a turntable without an amplifier. Are you sure you are using this?
It has a build ind pre amp riia It works on any b&o aux port no need for an amp How do I connect it is there a line in on the sound card ??? how do I connect a raspberry pi zero it has no pin connections??? you whrite that it is supported thanks
First: On the Pi Zero, you need to solder the 40 pin header by yourself if it deosn't have one.
However, I still don't understand your setup. What you your speakers connected to?
I dont understand why you ask, beomaster 4500 again is it possible to connet the Beogram 4500 With a pre amp bild in and if yes how? Thanks
You didn't say anything about the Beomaster before.
If you have an unused analog input on your Beomaster, you can simply connect a Raspberry Pi with a HiFiBerry DAC, e.g.
https://www.hifiberry.com/shop/bundles/dac2hd-pi-4-package/
The Beocreate can't be used in yor setup.
Ohh its a shame that the Beocreate doesn't support line in
As you already have an amplifier the Beocreate is not the right product anyway.
Stil it would have been great if i didnt had to use it and could have used beocreate With a line in instead
What a shame That record players with bild in pre-amp Can not use the beocreate because the beocreate dont have a line in