Dear HB Team,
As well as the previous release with the latest HB update "20210408" there is still the really bad/mad cracle/noise impulse after powering or reboot. This is really a concern of me since its not just an issue for the loudspeaker but also for my "families ears" (I have 3 Amp100).
It would be nice if you could have an eye/ear on it, and find a solution.
You might have the wrong soudn card configured. What's in your /boot/config.txt?
here the corresponding part of the config.txt
# How much memory in MB to assign to the GPU on Pi models having
# 256, 512 or 1024 MB total memory
gpu_mem_256=100
gpu_mem_512=100
gpu_mem_1024=100
# Enable I2C and SPI
dtparam=i2c=on
dtparam=spi=on
dtoverlay=i2c-gpio,i2c_gpio_sda=0,i2c_gpio_scl=1
force_eeprom_read=0
dtoverlay=hifiberry-amp100,automute
Looks ok. I'm not sure what might causing it in your setup. I'll see if we can reproduce this here.
Dear Hifiberry Team,
Are there news on this topic? Pls let me know if I can support.
No, still busy with other stuff.