0

Pi amp for TV

Darren Young

January 30, 2021 02:47

None

Follow

I have some speakers around I wanted to reuse for a TV that has SPDIF output and wondering if a combo of the Digi+ I/O and the Amp2 can be used to take that SPDIF input and run a pair of small speakers off the Amp. Possible? Are those the correct 2 things to use?

• Facebook
• Twitter
• LinkedIn

2 comments

• 0
  
  Norbert January 30, 2021 18:22

  => SPDIF input and run a pair of small speakers off the Amp. Possible? Are those the correct 2 things to use?
  Not with the AMP2 because you cannot stapel AMP2 and any other device.

  You can use the AMP100 (which has optical in) + DSP board (to activate the input) OR the Beocreate system.
  
  Regards
  Norbert

   

   

  Edited by Norbert January 31, 2021 05:33
• 0
  
  HiFiBerry team January 31, 2021 06:25

  Norbert is right. You can't use teh Digi+ I/O for this. You can't combine multiple sound cards on the same Pi.