Hi,
I received the DAC2 Pro and the DSP add-on board, installed the latest HiFiBerryOS but I don't think that the DSP is recognised. I attach two screenshots that might help. Any suggestions?
Thanks,
Fotis
Hi,
I received the DAC2 Pro and the DSP add-on board, installed the latest HiFiBerryOS but I don't think that the DSP is recognised. I attach two screenshots that might help. Any suggestions?
Thanks,
Fotis
Looks like the DSP is detected correctly - otherwise you would not see the DSP options in the GUI. However, the default program isn't known to HiFiBerryOS. You should install the latest DSP profile, but I'm not sure why you don't see these. They should be listed under "Available profiles".
Try the following:
- login via SSH
rm /etc/hifiberry.state
/opt/hifiberry/bin/reconfigure-players
I tried that with no luck. The result from /opt/hifiberry/bin/reconfigure-players is:
Simple mixer control 'Headphone',0
Capabilities: pvolume pvolume-joined
Playback channels: Mono
Limits: Playback 0 - 63
Mono: Playback 54 [86%] [0.00dB]
etc/hifiberry ~
~
pi
bluetooth
pi3orlater
arm7
dsp
localui
DAC2 Pro 1
Sound card settings have been changed, reconfiguring...
Applying settings:
Players: (was )
Raspberry Pi model: 4
System name: Solaria (was )
Sound card: DAC2 Pro (was )
DSP type: DAC2 Pro (was )
HW device: card 0 (was )
ALSA mixer control: Digital (was )
Recording: (was )
Vendor/product HiFiBerry DAC2 Pro (was )
Features: pi bluetooth pi3orlater arm7 dsp localui (was )
Saving settings to /etc/hifiberry.state
Reconfigure features
Reconfiguring Spotifyd
updated mixer
updated system name
Restarting spotify
Reconfiguring Vollibrespot
updated mixer
updated system name
updated mixer-card
Restarting spotify
Reconfiguring Shairport-sync
updated mixer
updated system name
Restarting shairport-sync
Reconfiguring Bluetooth
updated system name
updated mixer
Restarting bluetooth.service
Reconfiguring squeezelite
updated system name
Reconfiguring MPD
Restarting mpd
updated mixer
Reconfiguring DLNA
Reconfiguring Mopidy
modidy not installed, ignoring
Reconfigure AudioControl2
Restarting audiocontrol2
updated mixer
Reconfigure upmpdcli
updated system name
Reconfigure RAAT
RAAT not installed, ignoring
Configuring RAAT server for UUID ******* on DAC+ (snd_rpi_hifiberry_dacplus)
Reconfiguring Beocreate software
Value could not be interpreted as JSON, falling back to old method.
Settings updated for 'system'.
updated card type
Value could not be interpreted as JSON, falling back to old method.
Settings updated for 'sound'.
updated mixer
["pi","bluetooth","pi3orlater","arm7","dsp","localui"]
Settings updated for 'system'.
Value could not be interpreted as JSON, falling back to old method.
Settings updated for 'system'.
Restarting beocreate2
restarting Beocreate
Looks like a bug with the DSP profile selection. We need to look into this, but it's probably require software upgrade
As I understand, I should manually install the latest DSP profile. Where do I find the latest DSP profile for the dsp add-on board?