Hi, first post.
Struggling with which HAT to get - I'm looking at using with a Pi3, standard switching power supply and coaxial feed to Arcam SR250 receiver. Looking for full 24/192 support and I don't believe the Arcam is earthed. Will this cause me any problems?
I'd got my eye on the pro for the reclocking, but I don't want to negate this by introducing interference from floating shielding.
Which would be the best board for my scenario?
Thanks!
First: There is no "reclocking" on any our our boards. Yes, I know that some other companies claim that they do some "reclocking", but it doesn't make sense IMHO. Ideally, you have ONE clock that every component uses. That's the case with both the Digi+ and Digi+ Pro.
The Digi+ Pro's dual-domain clock can adjust slightly better to the different 44.1 and 48kHz sample rates as it has 2 base clocks.
If your DAC has a TOSLink input that should work well with both.
Thanks the quick reply. Aren't I limited to 24/96 via optical though? Looking to achieve full 24/192 and have read of issues with the Pro if not sharing a ground with the DAC. With my receiver, am I better off with the Standard? If so, what about the 44.1 clock?