I first setup the Pi3b+ with Picoreplayer successfully with mult Chromecasts working, (no HAT). Installed new DAC+Pro. Output Device: HiFiBerry DAC+ (andPro) OutputSetting: hw:CARD=sndrpihifiberry, no LED on HFB (never seen it flash actually), Only showing Chromecast devices in LMS, RaspberryPi Built-In Audio: ON (otherwise cannot see/change Output Settings to HiFiBerry choices). Only offered HiFiBerry options in the Output Settings of Squeezelite when booted with CardControl/Built-In Audio: ON. When I reboot with it off after picking Output for DAC+Pro Squeezlite won't run. I don't see any indication the board is "seen" at all. 40pin securely set, using a 5v 20amp ATX supply (after trying SMPS adapters of various sizes). Have not soldered anything on DAC+. Tried every permutation and combination of Built-In Audio ON,OFF, Output Settings:, dozens upon dozens of reboots.
So frustrating... so many hours. I need to be able to do Chromecast and HiFiBerry DAC+ output. Thank you. New-ish to RaspberryPi so kid-gloves please.
_
DMESG____
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.122-pcpCore_v7 (pCP@SoundStation) (gcc version 7.4.1 20181213 (crosstool-NG 1.24.0.6-afaf7b9)) #1 SMP Tue May 26 20:00:27 EDT 2020
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3dc00000
[ 0.000000] On node 0 totalpages: 255488
[ 0.000000] Normal zone: 2246 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 255488 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4b4 with crng_init=0
[ 0.000000] percpu: Embedded 16 pages/cpu s36748 r8192 d20596 u65536
[ 0.000000] pcpu-alloc: s36748 r8192 d20596 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 253242
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 tz=PST8PDT,M3.2.0,M11.1.0 dwc_otg.fiq_fsm_mask=0xF host=piCorePlayer dwc_otg.lpm_enable=0 console=tty1 root=/dev/ram0 elevator=deadline rootwait quiet nortc loglevel=3 noembed smsc95xx.turbo_mode=N noswap consoleblank=0 waitusb=2
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 985292K/1021952K available (8192K kernel code, 629K rwdata, 2196K rodata, 1024K init, 831K bss, 28468K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xbe800000 - 0xff800000 (1040 MB)
[ 0.000000] lowmem : 0x80000000 - 0xbe600000 ( 998 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (9184 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 630 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 832 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 26552 entries in 78 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000008] Switching to timer-based delay loop, resolution 52ns
[ 0.000139] Console: colour dummy device 80x30
[ 0.000151] console [tty1] enabled
[ 0.000178] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000184] pid_max: default: 32768 minimum: 301
[ 0.000340] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000351] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000839] CPU: Testing write buffer coherency: ok
[ 0.001098] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001414] Setting up static identity map for 0x100000 - 0x10003c
[ 0.001487] rcu: Hierarchical SRCU implementation.
[ 0.001861] smp: Bringing up secondary CPUs ...
[ 0.002301] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.002756] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.003164] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.003214] smp: Brought up 1 node, 4 CPUs
[ 0.003221] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.003224] CPU: All CPU(s) started in HYP mode.
[ 0.003226] CPU: Virtualization extensions available.
[ 0.003760] devtmpfs: initialized
[ 0.009740] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.009852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.009862] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.010207] pinctrl core: initialized pinctrl subsystem
[ 0.010626] NET: Registered protocol family 16
[ 0.012218] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.014774] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.014778] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.014893] Serial: AMBA PL011 UART driver
[ 0.015919] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.030010] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-05-22 21:13, variant start_cd
[ 0.040014] raspberrypi-firmware soc:firmware: Firmware hash is 4da3e1264076308eda90652cb98b553ae0586390
[ 0.064155] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.064893] SCSI subsystem initialized
[ 0.064994] usbcore: registered new interface driver usbfs
[ 0.065018] usbcore: registered new interface driver hub
[ 0.065060] usbcore: registered new device driver usb
[ 0.065866] clocksource: Switched to clocksource arch_sys_counter
[ 0.096662] VFS: Disk quotas dquot_6.6.0
[ 0.096712] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.096803] FS-Cache: Loaded
[ 0.096920] CacheFiles: Loaded
[ 0.101097] NET: Registered protocol family 2
[ 0.101507] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.101525] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.101573] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.101653] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.101728] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.101750] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.101863] NET: Registered protocol family 1
[ 0.102166] RPC: Registered named UNIX socket transport module.
[ 0.102169] RPC: Registered udp transport module.
[ 0.102171] RPC: Registered tcp transport module.
[ 0.102174] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.102289] Trying to unpack rootfs image as initramfs...
[ 0.271020] Freeing initrd memory: 4528K
[ 0.273927] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.275379] Initialise system trusted keyrings
[ 0.275495] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.279887] FS-Cache: Netfs 'nfs' registered for caching
[ 0.280215] NFS: Registering the id_resolver key type
[ 0.280230] Key type id_resolver registered
[ 0.280232] Key type id_legacy registered
[ 0.280240] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.282342] Key type asymmetric registered
[ 0.282348] Asymmetric key parser 'x509' registered
[ 0.282379] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.282462] io scheduler noop registered
[ 0.282466] io scheduler deadline registered (default)
[ 0.282563] io scheduler cfq registered
[ 0.282567] io scheduler mq-deadline registered (default)
[ 0.282570] io scheduler kyber registered
[ 0.283688] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.299215] Console: switching to colour frame buffer device 228x61
[ 0.305918] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984
[ 0.306444] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.307088] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.307231] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
[ 0.307461] vc-sm: Videocore shared memory driver
[ 0.307602] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.312254] brd: module loaded
[ 0.317411] loop: module loaded
[ 0.317737] Loading iSCSI transport class v2.0-870.
[ 0.318106] libphy: Fixed MDIO Bus: probed
[ 0.318156] usbcore: registered new interface driver lan78xx
[ 0.318182] usbcore: registered new interface driver smsc95xx
[ 0.318190] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.845874] dwc_otg 3f980000.usb: base=(ptrval)
[ 1.045997] Core Release: 2.80a
[ 1.046002] Setting default values for core params
[ 1.046018] Finished setting default values for core params
[ 1.246172] Using Buffer DMA mode
[ 1.246175] Periodic Transfer Interrupt Enhancement - disabled
[ 1.246178] Multiprocessor Interrupt Enhancement - disabled
[ 1.246181] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.246199] Dedicated Tx FIFOs mode
[ 1.246438] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = bdd14000 dma = 0xfdd14000 len=9024
[ 1.246453] FIQ FSM acceleration enabled for :
[ 1.246453] Non-periodic Split Transactions
[ 1.246453] Periodic Split Transactions
[ 1.246453] High-Speed Isochronous Endpoints
[ 1.246453] Interrupt/Control Split Transaction hack enabled
[ 1.246456] dwc_otg: Microframe scheduler enabled
[ 1.246480] WARN::hcd_init_fiq:457: FIQ on core 1
[ 1.246485] WARN::hcd_init_fiq:458: FIQ ASM at 80641d1c length 36
[ 1.246490] WARN::hcd_init_fiq:497: MPHI regs_base at be810000
[ 1.246498] dwc_otg 3f980000.usb: DWC OTG Controller
[ 1.246514] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 1.246531] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 1.246566] Init: Port Power? op_state=1
[ 1.246568] Init: Power Port (0)
[ 1.246692] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.246697] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.246702] usb usb1: Product: DWC OTG Controller
[ 1.246706] usb usb1: Manufacturer: Linux 4.19.122-pcpCore_v7 dwc_otg_hcd
[ 1.246709] usb usb1: SerialNumber: 3f980000.usb
[ 1.247005] hub 1-0:1.0: USB hub found
[ 1.247025] hub 1-0:1.0: 1 port detected
[ 1.247302] dwc_otg: FIQ enabled
[ 1.247305] dwc_otg: NAK holdoff enabled
[ 1.247307] dwc_otg: FIQ split-transaction FSM enabled
[ 1.247313] Module dwc_common_port init
[ 1.247452] usbcore: registered new interface driver usb-storage
[ 1.247534] mousedev: PS/2 mouse device common for all mice
[ 1.247958] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.248073] bcm2835-cpufreq: min=600000 max=1400000
[ 1.249324] sdhci: Secure Digital Host Controller Interface driver
[ 1.249326] sdhci: Copyright(c) Pierre Ossman
[ 1.249519] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ 1.249707] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 1.249765] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.250850] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.250921] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.251002] usbcore: registered new interface driver usbhid
[ 1.251004] usbhid: USB HID core driver
[ 1.251411] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 1.252364] [vc_sm_connected_init]: start
[ 1.255251] vc_vchi_sm_init: failed to open VCHI service (-1)
[ 1.255255] [vc_sm_connected_init]: failed to initialize shared memory service
[ 1.255259] [vc_sm_connected_init]: end - returning -1
[ 1.255839] Initializing XFRM netlink socket
[ 1.255853] NET: Registered protocol family 17
[ 1.255992] Key type dns_resolver registered
[ 1.256275] Registering SWP/SWPB emulation handler
[ 1.256623] registered taskstats version 1
[ 1.256634] Loading compiled-in X.509 certificates
[ 1.259827] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 1.259871] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 1.260797] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.260802] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 1.286253] sdhost: log_buf @ (ptrval) (fdd13000)
[ 1.322269] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.323762] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.325255] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.327963] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.334504] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.335116] of_cfs_init
[ 1.335182] of_cfs_init: OK
[ 1.357830] Freeing unused kernel memory: 1024K
[ 1.376035] Run /init as init process
[ 1.391735] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.394532] mmc0: new high speed SDHC card at address 0001
[ 1.395236] mmcblk0: mmc0:0001 00000 29.8 GiB
[ 1.396782] mmcblk0: p1 p2
[ 1.398954] random: fast init done
[ 1.406651] mmc1: new high speed SDIO card at address 0001
[ 1.466039] Indeed it is in host mode hprt0 = 00021501
[ 1.675956] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.676090] Indeed it is in host mode hprt0 = 00001101
[ 1.916032] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.916040] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.916434] hub 1-1:1.0: USB hub found
[ 1.916484] hub 1-1:1.0: 4 ports detected
[ 2.235882] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.366015] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 2.366020] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.366362] hub 1-1.1:1.0: USB hub found
[ 2.366415] hub 1-1.1:1.0: 3 ports detected
[ 2.465885] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ 2.621378] usb 1-1.3: New USB device found, idVendor=413c, idProduct=2107, bcdDevice= 1.78
[ 2.621383] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.621388] usb 1-1.3: Product: Dell USB Entry Keyboard
[ 2.621392] usb 1-1.3: Manufacturer: Dell
[ 2.634369] input: Dell Dell USB Entry Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:413C:2107.0001/input/input0
[ 2.696194] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-3f980000.usb-1.3/input0
[ 3.025917] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
[ 3.156278] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 3.156290] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.420651] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 3.421563] libphy: lan78xx-mdiobus: probed
[ 3.430566] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[ 3.758412] zram: Added device: zram0
[ 3.787588] zram0: detected capacity change from 0 to 246403072
[ 3.793890] random: mkswap: uninitialized urandom read (16 bytes read)
[ 3.800021] Adding 240624k swap on /dev/zram0. Priority:-2 extents:1 across:240624k SSFS
[ 3.886022] usb 1-1.1.2: new high-speed USB device number 6 using dwc_otg
[ 3.969454] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.096933] usb 1-1.1.2: New USB device found, idVendor=0bc2, idProduct=ac31, bcdDevice=17.07
[ 4.096948] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.096957] usb 1-1.1.2: Product: BUP Slim
[ 4.096966] usb 1-1.1.2: Manufacturer: Seagate
[ 4.096975] usb 1-1.1.2: SerialNumber: 00000000NAB5HBDX
[ 4.097850] usb 1-1.1.2: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
[ 4.097864] usb 1-1.1.2: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
[ 4.097876] usb-storage 1-1.1.2:1.0: USB Mass Storage device detected
[ 4.098398] scsi host0: usb-storage 1-1.1.2:1.0
[ 4.541951] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.655723] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.126676] scsi 0:0:0:0: Direct-Access Seagate BUP Slim 1707 PQ: 0 ANSI: 6
[ 6.808452] sd 0:0:0:0: [sda] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 6.808776] sd 0:0:0:0: [sda] Write Protect is off
[ 6.808790] sd 0:0:0:0: [sda] Mode Sense: bf 00 00 00
[ 6.809099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.841613] sda: sda1
[ 6.844091] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.675861] random: crng init done
[ 12.579333] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.617224] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.683261] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 12.693491] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 12.697330] usbcore: registered new interface driver brcmfmac
[ 12.783112] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.851817] bcm2835_audio soc:audio: card created with 8 channels
[ 12.987175] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 12.988089] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 13.001089] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 13.682252] Starting piCorePlayer v6.1.0 startup.
[ 13.871091] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 13.871836] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 13.896931] pcm512x 1-004d: Linked as a consumer to regulator.1
[ 13.899813] pcm512x 1-004d: Failed to reset device: -121
[ 13.900245] pcm512x: probe of 1-004d failed with error -121
[ 14.603575] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 14.886117] Under-voltage detected! (0x00050005)
[ 14.989629] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.279349] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 33.606074] Voltage normalised (0x00000000)
[ 46.086093] Under-voltage detected! (0x00050005)
[ 46.206902] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 52.326088] Voltage normalised (0x00000000)
[ 54.406110] Under-voltage detected! (0x00050005)
[ 59.013100] Finished piCorePlayer v6.1.0 startup.
[ 71.045998] Voltage normalised (0x00000000)
[ 128.170431] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
_LSMOD___
Module Size Used by
snd_soc_pcm512x_i2c 16384 0
snd_soc_pcm512x 32768 1 snd_soc_pcm512x_i2c
spidev 16384 0
snd_soc_hifiberry_dacplus 16384 0
raspberrypi_hwmon 16384 0
hwmon 16384 1 raspberrypi_hwmon
snd_bcm2835 28672 0
brcmfmac 315392 0
brcmutil 16384 1 brcmfmac
cfg80211 647168 1 brcmfmac
rfkill 28672 2 cfg80211
snd_soc_bcm2835_i2s 16384 0
snd_soc_core 192512 3 snd_soc_pcm512x,snd_soc_hifiberry_dacplus,snd_soc_bcm2835_i2s
snd_compress 20480 1 snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
i2c_bcm2835 16384 0
snd_pcm 98304 6 snd_soc_pcm512x,snd_pcm_dmaengine,snd_soc_hifiberry_dacplus,snd_soc_bcm2835_i2s,snd_bcm2835,snd_soc_core
spi_bcm2835 20480 0
snd_timer 32768 1 snd_pcm
snd 73728 6 snd_compress,snd_soc_pcm512x,snd_timer,snd_bcm2835,snd_soc_core,snd_pcm
clk_hifiberry_dacpro 16384 0
fixed 16384 0
squashfs 45056 65
sch_fq_codel 20480 3
lz4 16384 4
lz4_compress 61440 1 lz4
zram 28672 1
zsmalloc 28672 1 zram
evdev 24576 0
