Hello, the BNC connector if it is soldered also passes through the transformer? If you solder the transformer you need to connect the place with a jumper? My sinal will pass through the tube outlet with its own transformers.
Date
Votes
8 comments
-
HiFiBerry team Yes, the BNC connector also passes trough the transformer.
-
Dmitry Piters Do I understand correctly that if I remove a transformer with a jumper, I will get a non-transformer version?
-
HiFiBerry team No, you can't remove the transformer with a jumper.
-
Dmitry Piters Do you not understand me, if I remove the transformer from the Board and also remove the jumper, I will get a non-transformer version?
-
HiFiBerry team I'm not sure if I understand you. Removing the transformer will stop the output completely. There is no easy way to make a transformer-less version of the Digi+ Pro.
-
Dmitry Piters I have a Board with a tube output for spdif with its own transformers, so the transformer on the Board interferes. If the signal is interrupted when the transformer is removed, then the track can be connected with a jumper, isn't it? If you can send me a diagram of the Board, it would be easier for me to understand how to implement the plan.
-
HiFiBerry team If by "jumper" you mean cable - in theory yes. However, just adding cables will mess up signal quality. If you need a board without an output transformer, just use the Digi+ Standard instead. This will definitely be a better version than removing some parts and adding cables.
We don't publish circuit diagrams of our boards - sorry. -
Dmitry Piters Since you can not give me a diagram, tell me where to put a jumper so that the spdif output works bypassing the transformer?
Please sign in to leave a comment.