0

Dac+ADC PRO sound and source issues

Good afternoon,

I would like to check if my config is correct because i don't get any sound from the board. I would like to use rpi HDMI ouput, but non of my outputs seem to be working at this moment. Might be related; After selecting analogue input (only one in the list), top left corner still states no source. Only thing I have changed in config is the dtoverlay.

Many thanks in advance!

 

# Please note that this is only a sample, we recommend you to change it to fit
# your needs.
# You should override this file using a post-build script.
# See http://buildroot.org/manual.html#rootfs-custom
# and http://elinux.org/RPiconfig for a description of config.txt syntax

kernel=zImage

# To use an external initramfs file
#initramfs rootfs.cpio.gz

# Disable overscan assuming the display supports displaying the full resolution
# If the text shown on the screen disappears off the edge, comment this out
disable_overscan=1

# How much memory in MB to assign to the GPU on Pi models having
# 256, 512 or 1024 MB total memory
gpu_mem_256=100
gpu_mem_512=100
gpu_mem_1024=100
# Enable I2C and SPI
dtparam=i2c=on
dtparam=spi=on
dtoverlay=vc4-fkms-v3d,audio=off
dtoverlay=hifiberry-dacplusadcpro

 

2 comments

Please sign in to leave a comment.