The dac+ zero will not be detected by the raspberry pi. I have followed the configuration guide for linux 4.x or higher. I have tried using a raspberry pi 3B+. It won't work with either. I have gotten this to work on a different pi with a dac+ pro. However, with a dac+ standard that I also have, and the dac+ zero I have had no luck. I've attached outputs of dmesg, sudo vcdbg log msg, and a snippet from my config.txt file. Help with be greatly appreciated!
pi@raspberrypi:~ $ aplay -l
aplay: device_list:272: no soundcards found...
pi@raspberrypi:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.51-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1332 SMP Tue Aug 4 18:34:21 BST 2020
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x37400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 20 pages/cpu s49856 r8192 d23872 u81920
[ 0.000000] pcpu-alloc: s49856 r8192 d23872 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=b2528cdb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 881516K/970752K available (8192K kernel code, 689K rwdata, 2552K rodata, 1024K init, 825K bss, 23700K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28275 entries in 56 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x328/0x500 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000019] Switching to timer-based delay loop, resolution 52ns
[ 0.000284] Console: colour dummy device 80x30
[ 0.000312] printk: console [tty1] enabled
[ 0.000361] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000381] pid_max: default: 32768 minimum: 301
[ 0.000765] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000786] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002146] Disabling memory control group subsystem
[ 0.002247] CPU: Testing write buffer coherency: ok
[ 0.002807] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003737] Setting up static identity map for 0x100000 - 0x10003c
[ 0.003931] rcu: Hierarchical SRCU implementation.
[ 0.004606] smp: Bringing up secondary CPUs ...
[ 0.005717] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.006978] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.008125] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.008277] smp: Brought up 1 node, 4 CPUs
[ 0.008292] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.008302] CPU: All CPU(s) started in HYP mode.
[ 0.008311] CPU: Virtualization extensions available.
[ 0.009288] devtmpfs: initialized
[ 0.025884] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.026135] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.026163] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.029203] pinctrl core: initialized pinctrl subsystem
[ 0.030464] NET: Registered protocol family 16
[ 0.034811] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.041230] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.041243] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.041477] Serial: AMBA PL011 UART driver
[ 0.043434] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.060093] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-08-04 19:03, variant start
[ 0.070106] raspberrypi-firmware soc:firmware: Firmware hash is 3cb94824fd7a2fa44962b271c5a6fd183764a9ec
[ 0.121701] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.123919] SCSI subsystem initialized
[ 0.124176] usbcore: registered new interface driver usbfs
[ 0.124238] usbcore: registered new interface driver hub
[ 0.124363] usbcore: registered new device driver usb
[ 0.126434] clocksource: Switched to clocksource arch_sys_counter
[ 1.287225] VFS: Disk quotas dquot_6.6.0
[ 1.287340] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.287537] FS-Cache: Loaded
[ 1.287809] CacheFiles: Loaded
[ 1.298883] thermal_sys: Registered thermal governor 'step_wise'
[ 1.299281] NET: Registered protocol family 2
[ 1.300307] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 1.300352] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 1.300467] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 1.300657] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.300820] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.300872] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.301160] NET: Registered protocol family 1
[ 1.301863] RPC: Registered named UNIX socket transport module.
[ 1.301874] RPC: Registered udp transport module.
[ 1.301883] RPC: Registered tcp transport module.
[ 1.301893] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.303726] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 1.307062] Initialise system trusted keyrings
[ 1.307312] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.319108] FS-Cache: Netfs 'nfs' registered for caching
[ 1.319905] NFS: Registering the id_resolver key type
[ 1.319960] Key type id_resolver registered
[ 1.319971] Key type id_legacy registered
[ 1.319991] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.321306] Key type asymmetric registered
[ 1.321318] Asymmetric key parser 'x509' registered
[ 1.321369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.321382] io scheduler mq-deadline registered
[ 1.321393] io scheduler kyber registered
[ 1.326155] bcm2708_fb soc:fb: FB found 1 display(s)
[ 1.360977] Console: switching to colour frame buffer device 228x61
[ 1.391325] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984
[ 1.396677] bcm2835-rng 3f104000.rng: hwrng registered
[ 1.397181] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.397897] vc-sm: Videocore shared memory driver
[ 1.398386] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 1.411449] brd: module loaded
[ 1.424295] loop: module loaded
[ 1.425714] Loading iSCSI transport class v2.0-870.
[ 1.426709] libphy: Fixed MDIO Bus: probed
[ 1.426843] usbcore: registered new interface driver lan78xx
[ 1.426906] usbcore: registered new interface driver smsc95xx
[ 1.426931] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.155211] Core Release: 2.80a
[ 2.155226] Setting default values for core params
[ 2.155263] Finished setting default values for core params
[ 2.355659] Using Buffer DMA mode
[ 2.355671] Periodic Transfer Interrupt Enhancement - disabled
[ 2.355681] Multiprocessor Interrupt Enhancement - disabled
[ 2.355692] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.355718] Dedicated Tx FIFOs mode
[ 2.356456] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b7504000 dma = 0xf7504000 len=9024
[ 2.356489] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 2.356501] dwc_otg: Microframe scheduler enabled
[ 2.356563] WARN::hcd_init_fiq:457: FIQ on core 1
[ 2.356574] WARN::hcd_init_fiq:458: FIQ ASM at 806d89f4 length 36
[ 2.356584] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
[ 2.356606] dwc_otg 3f980000.usb: DWC OTG Controller
[ 2.356647] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 2.356694] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 2.356748] Init: Port Power? op_state=1
[ 2.356758] Init: Power Port (0)
[ 2.357132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 2.357148] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.357162] usb usb1: Product: DWC OTG Controller
[ 2.357175] usb usb1: Manufacturer: Linux 5.4.51-v7+ dwc_otg_hcd
[ 2.357189] usb usb1: SerialNumber: 3f980000.usb
[ 2.357896] hub 1-0:1.0: USB hub found
[ 2.357960] hub 1-0:1.0: 1 port detected
[ 2.358762] dwc_otg: FIQ enabled
[ 2.358772] dwc_otg: NAK holdoff enabled
[ 2.358781] dwc_otg: FIQ split-transaction FSM enabled
[ 2.358796] Module dwc_common_port init
[ 2.359160] usbcore: registered new interface driver usb-storage
[ 2.359368] mousedev: PS/2 mouse device common for all mice
[ 2.360744] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 2.362991] sdhci: Secure Digital Host Controller Interface driver
[ 2.363001] sdhci: Copyright(c) Pierre Ossman
[ 2.363577] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ 2.364219] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 2.364434] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.366255] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.366704] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.366869] usbcore: registered new interface driver usbhid
[ 2.366878] usbhid: USB HID core driver
[ 2.367935] vchiq: vchiq_init_state: slot_zero = (ptrval)
[ 2.369847] [vc_sm_connected_init]: start
[ 2.379719] [vc_sm_connected_init]: end - returning 0
[ 2.381524] Initializing XFRM netlink socket
[ 2.381562] NET: Registered protocol family 17
[ 2.381705] Key type dns_resolver registered
[ 2.382519] Registering SWP/SWPB emulation handler
[ 2.382839] registered taskstats version 1
[ 2.382860] Loading compiled-in X.509 certificates
[ 2.383392] Key type ._fscrypt registered
[ 2.383403] Key type .fscrypt registered
[ 2.394170] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 2.394267] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 2.396265] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 2.397888] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 2.397902] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 2.424530] sdhost: log_buf @ (ptrval) (f7507000)
[ 2.460406] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.462042] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.463677] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.466614] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.473538] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 2.476164] of_cfs_init
[ 2.476497] of_cfs_init: OK
[ 2.477516] Waiting for root device PARTUUID=b2528cdb-02...
[ 2.533309] mmc0: host does not support reading read-only switch, assuming write-enable
[ 2.535058] random: fast init done
[ 2.535152] mmc0: Problem switching card into high-speed mode!
[ 2.536494] mmc0: new SDHC card at address 0001
[ 2.537620] mmcblk0: mmc0:0001 SD32G 28.8 GiB
[ 2.540652] mmcblk0: p1 p2
[ 2.569906] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 2.569923] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 2.576621] Indeed it is in host mode hprt0 = 00021501
[ 2.649811] mmc1: new high speed SDIO card at address 0001
[ 2.786514] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.786695] Indeed it is in host mode hprt0 = 00001101
[ 3.027048] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 3.027065] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.027870] hub 1-1:1.0: USB hub found
[ 3.027983] hub 1-1:1.0: 5 ports detected
[ 3.050983] EXT4-fs (mmcblk0p2): recovery complete
[ 3.053899] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.054004] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 3.055400] devtmpfs: mounted
[ 3.063549] Freeing unused kernel memory: 1024K
[ 3.063960] Run /sbin/init as init process
[ 3.346500] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.476934] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 3.476953] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.479826] smsc95xx v1.0.6
[ 3.571062] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:1c:5a:e0
[ 4.089448] systemd[1]: System time before build time, advancing clock.
[ 4.346870] NET: Registered protocol family 10
[ 4.348463] Segment Routing with IPv6
[ 4.419746] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.420739] systemd[1]: Detected architecture arm.
[ 4.479361] systemd[1]: Set hostname to <raspberrypi>.
[ 5.530772] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.546338] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.547156] systemd[1]: Listening on udev Kernel Socket.
[ 5.547788] random: systemd: uninitialized urandom read (16 bytes read)
[ 5.547868] systemd[1]: Reached target Swap.
[ 5.551156] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.551982] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.552486] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.565970] systemd[1]: Listening on Syslog Socket.
[ 5.604250] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 5.853944] i2c /dev entries driver
[ 6.555540] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.664575] systemd-journald[100]: Received request to flush runtime journal from PID 1
[ 7.441157] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.443824] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 7.443857] [vc_sm_connected_init]: start
[ 7.447389] [vc_sm_connected_init]: installed successfully
[ 7.453895] mc: Linux media interface: v0.10
[ 7.556840] videodev: Linux video capture interface: v2.00
[ 7.689226] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.689231] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.689983] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.755477] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.758219] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.781903] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.791768] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 7.792429] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 7.793548] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 7.795098] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 7.795138] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 7.795160] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 7.795178] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 7.795201] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 7.795424] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 7.796129] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 7.796176] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 7.809302] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 7.809359] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 7.838402] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 7.838457] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 8.187231] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.323318] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.494316] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 8.504102] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.504461] usbcore: registered new interface driver brcmfmac
[ 8.543489] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt failed with error -2
[ 8.753503] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 8.753637] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 8.754480] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd
[ 11.343220] random: crng init done
[ 11.343261] random: 7 urandom warning(s) missed due to ratelimiting
[ 11.405143] uart-pl011 3f201000.serial: no DMA platform data
[ 11.859441] 8021q: 802.1Q VLAN Support v1.8
[ 12.499871] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 12.585244] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 13.288265] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 14.137406] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.872115] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
[ 16.438963] Bluetooth: Core ver 2.22
[ 16.439053] NET: Registered protocol family 31
[ 16.439058] Bluetooth: HCI device and connection manager initialized
[ 16.439077] Bluetooth: HCI socket layer initialized
[ 16.439087] Bluetooth: L2CAP socket layer initialized
[ 16.439105] Bluetooth: SCO socket layer initialized
[ 16.455419] Bluetooth: HCI UART driver ver 2.3
[ 16.455433] Bluetooth: HCI UART protocol H4 registered
[ 16.455483] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 16.455650] Bluetooth: HCI UART protocol Broadcom registered
[ 16.827777] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.827788] Bluetooth: BNEP filters: protocol multicast
[ 16.827808] Bluetooth: BNEP socket layer initialized
[ 16.929975] Bluetooth: RFCOMM TTY layer initialized
[ 16.930015] Bluetooth: RFCOMM socket layer initialized
[ 16.930055] Bluetooth: RFCOMM ver 1.11
[ 19.716221] fuse: init (API version 7.31)
[ 34.266483] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[ 34.408096] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.03
[ 34.408118] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 34.408133] usb 1-1.4: Product: USB Receiver
[ 34.408146] usb 1-1.4: Manufacturer: Logitech
[ 34.418518] input: Logitech USB Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C52B.0001/input/input0
[ 34.491232] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3f980000.usb-1.4/input0
[ 34.501569] input: Logitech USB Receiver Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input1
[ 34.502969] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input2
[ 34.567321] input: Logitech USB Receiver System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C52B.0002/input/input3
[ 34.569924] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3f980000.usb-1.4/input1
[ 34.580211] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.4/input2
[ 34.912540] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-3f980000.usb-1.4/input2
[ 35.052081] input: Logitech Unifying Device. Wireless PID:4055 Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4055.0004/input/input5
[ 35.052727] hid-generic 0003:046D:4055.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4055] on usb-3f980000.usb-1.4/input2:1
[ 35.056362] input: Logitech Unifying Device. Wireless PID:4016 Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input9
[ 35.061703] input: Logitech Unifying Device. Wireless PID:4016 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input10
[ 35.061958] input: Logitech Unifying Device. Wireless PID:4016 System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input11
[ 35.069408] hid-generic 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4016] on usb-3f980000.usb-1.4/input2:2
[ 35.315812] input: Logitech Unifying Device. Wireless PID:4055 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4055.0004/input/input15
[ 35.317124] logitech-hidpp-device 0003:046D:4055.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4055] on usb-3f980000.usb-1.4/input2:1
[ 35.543218] logitech-hidpp-device 0003:046D:4055.0004: HID++ 4.5 device connected.
[ 35.677716] input: Logitech K330 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input16
[ 35.678426] logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-3f980000.usb-1.4/input2:2
[ 41.595289] logitech-hidpp-device 0003:046D:4016.0005: HID++ 2.0 device connected.
pi@raspberrypi:~ $ sudo vcdbg log msg
001036.571: brfs: File read: /mfs/sd/config.txt
001037.627: brfs: File read: 1821 bytes
001093.581: brfs: File read: /mfs/sd/config.txt
001094.507: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001106.564: brfs: File read: 1821 bytes
001297.560: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined
001298.803: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
001298.867: *** Restart logging
001331.724: HDMI0: hdmi_pixel_encoding: 162000000
001336.992: dtb_file 'bcm2710-rpi-3-b.dtb'
001341.562: brfs: File read: /mfs/sd/bcm2710-rpi-3-b.dtb
001341.585: Loading 'bcm2710-rpi-3-b.dtb' to 0x100 size 0x6d4c
001354.815: brfs: File read: 27980 bytes
001367.820: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
001428.823: brfs: File read: 1423 bytes
001432.413: brfs: File read: /mfs/sd/config.txt
001439.108: brfs: File read: 1821 bytes
001439.892: brfs: File read: /mfs/sd/cmdline.txt
001439.951: Read command line from file 'cmdline.txt':
001439.974: 'console=serial0,115200 console=tty1 root=PARTUUID=b2528cdb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles'
003001.149: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
003056.501: brfs: File read: 166 bytes
003455.445: brfs: File read: /mfs/sd/kernel7.img
003455.470: Loading 'kernel7.img' to 0x8000 size 0x5676f8
003455.501: Device tree loaded to 0x2eff8e00 (size 0x71b0)
003456.337: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
006384.495: vchiq_core: vchiq_init_state: slot_zero = 0xf7580000, is_master = 1
006389.186: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
006395.072: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010
pi@raspberrypi:~ $
/boot/config.txt
# Enable audio (loads snd_bcm2835)
#dtparam=audio=on
[pi4]
# Enable DRM VC4 V3D driver on top of the dispmanx display stack
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
dtoverlay=hifiberry-dac
dtdebug=1
[all]
#dtoverlay=vc4-fkms-v3d
