Hello
I've tried to use my Raspberries with Hifiberry, but i'm not able to boot any of them with the Images from the webpage.
I have a RPi 3 and one RPi 4 an non of them will boot with the Image.
With Raspbian there is no problem.
What can i do here?
Thanks Seprim
Hello
Same situation with me, only lhe release 20191030 is fine. (Rasp 3)
Latest release are not booting properly. At fisrt start everything seems OK, then i heard a sound, and then nothing left.
A reboot gave nothing....
Thanks to help
Hi,
Not sure what's wrong here. Try booting the Janurary release:
http://hifiberry.com/images/hbos-20200127/hifiberryos-pi3.zip
http://hifiberry.com/images/hbos-20200127/hifiberryos-pi4.zip
Best regards,
Daniel
Hello,
I have a pi 3 b and a digi+ standard. I'm unable to boot either the current release or the 20200127 release you are posting here. Each time it fails trying to fsck the mmcblk0p1 partition. I am able to boot raspian just fine using the same pi and sd card. Do you have any ideas? Can you provide an older release for me to try?
Thanks!
Current release is 2020026, not 20200127. What size is your SD card? How did you see that there is a problem with the mmcblk0p1 partition?
Yeah, i tried both 20200226 and 20200127 (which you posted above in this thread). I tried both 2GB and 16GB cards. I was able to get the message about the mmcblk0p1 partition by editing cmdline.txt like was mentioned in another thread on this forum to only contain
root=/dev/mmcblk0p2 rootwait
Before i changed cmdline.txt, i was only getting a blinking cursor on boot.
I can try posting some pictures of the full output if it would help. Let me know if you would like me to do that.
Thanks!
A 2GB card won't work. HiFiBerryOS requires at least 4GB. I think, we need to document this somewhere. Try again with the 16GB card. If this still doesn't work, I think the only thing we can do is to check your installation here in our lab.
I think I found a potential problem. I'll build a development release for tests.
Hello,
HIfiberry os is now booting, but I cannot launch Spotify connect....the message is "spotify is connecting".......
I will make further investigation tonight
Ok, here is a new development release. This seems to fix the boot issues - at least here. Can you try this:
https://www.hifiberry.com/dev/hifiberryos-pi3.zip
https://www.hifiberry.com/dev/hifiberryos-pi4.zip
I tested again with my pi3b.
The dev build did not work with a 2GB card, which i expected since you said it requires 4GB.
It worked on a 16GB card.
Thanks for the help!
Hi,
this development release finally works for me. My setup is a pi3b and amp+.
Thanks a lot.
im having issues with the current version of hifiberryos (20200805) with my pi3b and amp+
i have tried installing it multiple times using a 16gb sd card. when the pi is turned on, it shows the initial hifi berry logo and starts the initial boot sequence and after a few minutes i get an error that says
[firmware bug]: Boot loader left irq enabled: bank 1 irq 9
i have used the same pi3b and amp+ with other os systems like max2play and it worked fine. i was hoping to test the development version that was posted but the link no longer works
Same here, [firmware bug]: Boot loader left irq enabled: bank 1 irq 9 on RPI4 with hifiberry digi pro, and without the card too. Multiple SD cards, all 16gb or above, multiple ways of formatting and creating the card. Even manual format and using 'DD' to write the image fails to work.
That's not a problem. Just ignore this. If you're looking for something on the screen - there won't be anything as long as you don't enable local UI in the settings. You need to configure it with the web browser:
https://www.hifiberry.com/docs/hifiberryos/setup-hifiberryos/
