0

No sound - Signal Unlock

Hi,

I get no sound when playing music with Digi+ (Standard Version) on optical digital out. There is red light in the optical cable when i play music. My AV-receiver (Marantz M-CR511) only says "Signal Unlock". Thats what it also says when there is no cable connected.

I know that the optical in of the receiver works, i have tested it with a CD-player. The manual of the receiver says that only playback of digital linear 2-canal-PCM audio signals is possible.

On RPi3 B+ I have tried with 3 different OS:

  1. LibreELEC with Kodi
  2. OSMC
  3. HifiberryOS

I have tried messing around with all the options, no sound on any of them.

What else can i try?

Thanks in advance!

ssh outputs (HifiberryOS):

# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_digi], device 0: HiFiBerry Digi+ Pro HiFi wm8804-spdif-0 [HiFiBerry Digi+ Pro HiFi wm8804-spdif-0]
Subdevices: 1/1
Subdevice #0: subdevice #0

 

# amixer
Simple mixer control 'DSPVolume',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 255
Front Left: 230 [90%]
Front Right: 230 [90%]
Simple mixer control 'Softvol',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 255
Front Left: 128 [50%]
Front Right: 128 [50%]
Simple mixer control 'Tx Source',0
Capabilities: enum
Items: 'S/PDIF RX' 'AIF'
Item0: 'AIF'

 

# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.97-v7 (matuschd@ubuntu12) (gcc version 8.3.0 (Buildroot 2019.08)) #1 SMP Mon Jan 27 15:56:49 UTC 2020
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x39400000
[ 0.000000] On node 0 totalpages: 236544
[ 0.000000] Normal zone: 2079 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 236544 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4b4 with crng_init=0
[ 0.000000] percpu: Embedded 16 pages/cpu s36684 r8192 d20660 u65536
[ 0.000000] pcpu-alloc: s36684 r8192 d20660 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 234465
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=/dev/mmcblk0p2 rootwait console=tty5 systemd.show_status=0 quiet splash
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 914720K/946176K available (8192K kernel code, 653K rwdata, 2220K rodata, 1024K init, 820K bss, 23264K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xba000000 - 0xff800000 (1112 MB)
lowmem : 0x80000000 - 0xb9c00000 ( 924 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x(ptrval) - 0x(ptrval) (9184 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 654 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 821 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 26800 entries in 79 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000273] Console: colour dummy device 80x30
[ 0.000292] console [tty5] enabled
[ 0.000334] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000348] pid_max: default: 32768 minimum: 301
[ 0.000670] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000686] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001606] CPU: Testing write buffer coherency: ok
[ 0.002064] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002707] Setting up static identity map for 0x100000 - 0x10003c
[ 0.002858] rcu: Hierarchical SRCU implementation.
[ 0.003645] smp: Bringing up secondary CPUs ...
[ 0.004479] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005412] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.006269] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.006392] smp: Brought up 1 node, 4 CPUs
[ 0.006403] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.006409] CPU: All CPU(s) started in HYP mode.
[ 0.006414] CPU: Virtualization extensions available.
[ 0.007384] devtmpfs: initialized
[ 0.020221] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.020452] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.020471] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.021078] pinctrl core: initialized pinctrl subsystem
[ 0.021930] NET: Registered protocol family 16
[ 0.024805] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.030340] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.030348] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.030556] Serial: AMBA PL011 UART driver
[ 0.032877] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.050028] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-19 16:43, variant start
[ 0.060040] raspberrypi-firmware soc:firmware: Firmware hash is 2354eac70a98807e06bed2149bc0c5613e751c15
[ 0.102334] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.103979] SCSI subsystem initialized
[ 0.104193] usbcore: registered new interface driver usbfs
[ 0.104255] usbcore: registered new interface driver hub
[ 0.104348] usbcore: registered new device driver usb
[ 0.105794] clocksource: Switched to clocksource arch_sys_counter
[ 0.198298] VFS: Disk quotas dquot_6.6.0
[ 0.198381] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.198562] FS-Cache: Loaded
[ 0.198780] CacheFiles: Loaded
[ 0.208690] NET: Registered protocol family 2
[ 0.209515] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.209553] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.209663] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.209849] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.209984] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.210035] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.210273] NET: Registered protocol family 1
[ 0.210837] RPC: Registered named UNIX socket transport module.
[ 0.210843] RPC: Registered udp transport module.
[ 0.210849] RPC: Registered tcp transport module.
[ 0.210855] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.212081] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.215182] Initialise system trusted keyrings
[ 0.215365] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.225068] FS-Cache: Netfs 'nfs' registered for caching
[ 0.225630] NFS: Registering the id_resolver key type
[ 0.225662] Key type id_resolver registered
[ 0.225668] Key type id_legacy registered
[ 0.225684] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.228000] Key type asymmetric registered
[ 0.228008] Asymmetric key parser 'x509' registered
[ 0.228055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.228217] io scheduler noop registered
[ 0.228225] io scheduler deadline registered
[ 0.228417] io scheduler cfq registered (default)
[ 0.228425] io scheduler mq-deadline registered
[ 0.228432] io scheduler kyber registered
[ 0.230649] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.241898] Console: switching to colour frame buffer device 90x30
[ 0.247749] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 720x480
[ 0.249836] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.250167] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.250701] vc-sm: Videocore shared memory driver
[ 0.251027] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.261577] brd: module loaded
[ 0.271599] loop: module loaded
[ 0.272193] Loading iSCSI transport class v2.0-870.
[ 0.272887] libphy: Fixed MDIO Bus: probed
[ 0.272988] usbcore: registered new interface driver lan78xx
[ 0.273044] usbcore: registered new interface driver smsc95xx
[ 0.273059] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.300901] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.501153] Core Release: 2.80a
[ 0.501163] Setting default values for core params
[ 0.501187] Finished setting default values for core params
[ 0.701491] Using Buffer DMA mode
[ 0.701498] Periodic Transfer Interrupt Enhancement - disabled
[ 0.701503] Multiprocessor Interrupt Enhancement - disabled
[ 0.701511] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.701526] Dedicated Tx FIFOs mode
[ 0.701995] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = b9514000 dma = 0xf9514000 len=9024
[ 0.702020] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.702028] dwc_otg: Microframe scheduler enabled
[ 0.702083] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.702094] WARN::hcd_init_fiq:458: FIQ ASM at 8067d44c length 36
[ 0.702104] WARN::hcd_init_fiq:497: MPHI regs_base at ba010000
[ 0.702121] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.702155] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.702188] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.702236] Init: Port Power? op_state=1
[ 0.702242] Init: Power Port (0)
[ 0.702495] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.702507] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.702516] usb usb1: Product: DWC OTG Controller
[ 0.702525] usb usb1: Manufacturer: Linux 4.19.97-v7 dwc_otg_hcd
[ 0.702533] usb usb1: SerialNumber: 3f980000.usb
[ 0.703148] hub 1-0:1.0: USB hub found
[ 0.703200] hub 1-0:1.0: 1 port detected
[ 0.703762] dwc_otg: FIQ enabled
[ 0.703768] dwc_otg: NAK holdoff enabled
[ 0.703773] dwc_otg: FIQ split-transaction FSM enabled
[ 0.703785] Module dwc_common_port init
[ 0.704048] usbcore: registered new interface driver usb-storage
[ 0.704224] mousedev: PS/2 mouse device common for all mice
[ 0.705059] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.705281] bcm2835-cpufreq: min=600000 max=1400000
[ 0.705748] sdhci: Secure Digital Host Controller Interface driver
[ 0.705753] sdhci: Copyright(c) Pierre Ossman
[ 0.706194] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ 0.706606] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.706738] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.708278] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.708428] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.708631] usbcore: registered new interface driver usbhid
[ 0.708637] usbhid: USB HID core driver
[ 0.709426] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.710945] [vc_sm_connected_init]: start
[ 0.719567] [vc_sm_connected_init]: end - returning 0
[ 0.720641] Initializing XFRM netlink socket
[ 0.720666] NET: Registered protocol family 17
[ 0.720784] Key type dns_resolver registered
[ 0.721171] Registering SWP/SWPB emulation handler
[ 0.721818] registered taskstats version 1
[ 0.721835] Loading compiled-in X.509 certificates
[ 0.728727] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.728806] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.730676] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 0.730686] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 0.756551] sdhost: log_buf @ (ptrval) (f9513000)
[ 0.792557] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.794140] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.795722] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.798534] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.804944] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.806299] of_cfs_init
[ 0.806390] of_cfs_init: OK
[ 0.827572] Waiting for root device /dev/mmcblk0p2...
[ 0.866060] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.869012] mmc0: new high speed SDHC card at address 0007
[ 0.870287] mmcblk0: mmc0:0007 SD16G 14.5 GiB (quirks 0x80000000)
[ 0.872517] mmcblk0: p1 p2 p3 p4
[ 0.873359] random: fast init done
[ 0.883354] mmc1: new high speed SDIO card at address 0001
[ 0.891232] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 0.891241] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 0.935918] Indeed it is in host mode hprt0 = 00021501
[ 1.145841] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.145971] Indeed it is in host mode hprt0 = 00001101
[ 1.386086] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.386097] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.386740] hub 1-1:1.0: USB hub found
[ 1.386839] hub 1-1:1.0: 4 ports detected
[ 1.705827] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.836071] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.836082] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.836588] hub 1-1.1:1.0: USB hub found
[ 1.836676] hub 1-1.1:1.0: 3 ports detected
[ 2.189464] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ 2.575822] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[ 2.706227] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 2.706238] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.970096] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 2.971035] libphy: lan78xx-mdiobus: probed
[ 2.976558] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[ 11.724523] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 11.724814] EXT4-fs (mmcblk0p2): 1 truncate cleaned up
[ 11.724821] EXT4-fs (mmcblk0p2): recovery complete
[ 11.762695] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.762753] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 11.763393] devtmpfs: mounted
[ 11.768009] Freeing unused kernel memory: 1024K
[ 11.768376] Run /sbin/init as init process
[ 12.117716] systemd[1]: System time before build time, advancing clock.
[ 12.235930] NET: Registered protocol family 10
[ 12.237343] Segment Routing with IPv6
[ 12.253872] systemd[1]: systemd 241 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 12.254718] systemd[1]: Detected architecture arm.
[ 12.262452] systemd[1]: Set hostname to <HiFiBerry>.
[ 12.271522] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 12.328418] systemd-fstab-generator[83]: Ignoring "noauto" for root device
[ 12.599518] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/mpd.service target ../../../../usr/lib/systemd/system/shairport-sync.service has different name
[ 12.616100] systemd[1]: /usr/lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid \xe2\x86\x92 /run/samba/winbindd.pid; please update the unit file accordingly.
[ 12.664983] systemd[1]: /usr/lib/systemd/system/smb.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the unit file accordingly.
[ 12.714121] systemd[1]: /usr/lib/systemd/system/nmb.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the unit file accordingly.
[ 12.786068] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/mpd.service target ../../../../usr/lib/systemd/system/shairport-sync.service has different name
[ 12.793326] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/mpd.service target ../../../../usr/lib/systemd/system/shairport-sync.service has different name
[ 12.911480] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.928764] random: systemd: uninitialized urandom read (16 bytes read)
[ 12.929444] random: systemd: uninitialized urandom read (16 bytes read)
[ 13.272473] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 13.374764] systemd-journald[101]: Received request to flush runtime journal from PID 1
[ 13.430909] systemd-journald[101]: File /var/log/journal/1f65f84d9bc249838dbc62b968af6747/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 13.841584] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.844182] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 13.844197] [vc_sm_connected_init]: start
[ 13.845348] [vc_sm_connected_init]: installed successfully
[ 13.909968] media: Linux media interface: v0.10
[ 13.921781] systemd-journald[101]: File /var/log/journal/1f65f84d9bc249838dbc62b968af6747/user-1008.journal corrupted or uncleanly shut down, renaming and replacing.
[ 14.001601] videodev: Linux video capture interface: v2.00
[ 14.111509] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.111533] A link change request failed with some changes committed already. Interface eth0 may have been left with an inconsistent configuration, please check.
[ 14.197611] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.200039] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.282779] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 14.287853] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 14.320275] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.337639] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 14.340493] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 14.350774] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 14.350816] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 14.353649] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 14.353686] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 14.358521] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 14.358559] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 14.359406] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 14.362861] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 14.432380] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 14.432653] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 14.446075] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 14.446498] usbcore: registered new interface driver brcmfmac
[ 14.447277] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 14.551480] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 14.552327] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 14.570325] wm8804 1-003b: 1-003b supply PVDD not found, using dummy regulator
[ 14.570403] wm8804 1-003b: Linked as a consumer to regulator.0
[ 14.570436] wm8804 1-003b: 1-003b supply DVDD not found, using dummy regulator
[ 14.574104] wm8804 1-003b: revision E
[ 14.583736] snd-rpi-wm8804 soc:sound: wm8804-spdif <-> 3f203000.i2s mapping ok
[ 14.643267] random: crng init done
[ 14.643281] random: 7 urandom warning(s) missed due to ratelimiting
[ 14.677299] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 14.690672] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 14.801879] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.801898] brcmfmac: power management disabled
[ 14.802341] A link change request failed with some changes committed already. Interface wlan0 may have been left with an inconsistent configuration, please check.
[ 15.126844] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 15.192606] EXT4-fs (mmcblk0p4): recovery complete
[ 15.197650] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[ 15.773569] systemd-journald[101]: File /var/log/journal/1f65f84d9bc249838dbc62b968af6747/user-1010.journal corrupted or uncleanly shut down, renaming and replacing.
[ 17.476825] systemd-journald[101]: Failed to read journal file /var/log/journal/1f65f84d9bc249838dbc62b968af6747/user-1001.journal for rotation, trying to move it out of the way: Device or resource busy
[ 17.529812] systemd-journald[101]: Failed to read journal file /var/log/journal/1f65f84d9bc249838dbc62b968af6747/user-1000.journal for rotation, trying to move it out of the way: Device or resource busy
[ 17.693960] uart-pl011 3f201000.serial: no DMA platform data
[ 17.788204] systemd-journald[101]: Failed to read journal file /var/log/journal/1f65f84d9bc249838dbc62b968af6747/user-1009.journal for rotation, trying to move it out of the way: Device or resource busy
[ 18.441744] Bluetooth: Core ver 2.22
[ 18.441848] NET: Registered protocol family 31
[ 18.441855] Bluetooth: HCI device and connection manager initialized
[ 18.441878] Bluetooth: HCI socket layer initialized
[ 18.441902] Bluetooth: L2CAP socket layer initialized
[ 18.441947] Bluetooth: SCO socket layer initialized
[ 18.478692] Bluetooth: HCI UART driver ver 2.3
[ 18.478710] Bluetooth: HCI UART protocol H4 registered
[ 18.478888] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 18.481169] Bluetooth: HCI UART protocol Broadcom registered
[ 18.782420] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.782434] Bluetooth: BNEP filters: protocol multicast
[ 18.782456] Bluetooth: BNEP socket layer initialized
[ 23.282537] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.360884] input: Virtual Keyboard as /devices/virtual/input/input0
[ 61.058838] input: 5C:51:81:E2:E3:62 as /devices/virtual/input/input1
[ 141.478173] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
[ 163.885351] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
[ 1057.488510] systemd-fstab-generator[974]: Ignoring "noauto" for root device

2 comments

Please sign in to leave a comment.