0

Beovox C75 Beocreative setup HiFiBerryOS 2 or Volumio

Hello Forum
I was attracted by the idea of up-cycling B&O loudspeakers. So I bought a pair of C75 speakers and I used a Raspi3. I modified both speaker according to this guide:
https://www.hifiberry.com/wp-content/uploads/2018/04/cx100_Stereo-guide.pdf
This part of the project was successful...
But the next step with the software, was frustrating.

I've installed the HiFiBerryOS and managed to setup the SW, I've used the Sound Preset of a CX100 Loudspeaker. 

I found out how to set the volume to 100%
https://support.hifiberry.com/hc/en-us/community/posts/360002058097-HiFiBerry-OS?page=7#comments 
Unfortunately after every reboot the configuration is lost. Is this possible?
I don’t understand either this MPD Music Player Daemon and the built in MPD Web Interface ympd

I know Volumio and I would like to use it with Beocreative 4 Channel Amplifier but I don’t know how to do it.

I've followed this post:https://support.hifiberry.com/hc/en-us/community/posts/360001338485-install-a-specific-DSP-profile-on-a-Volumio-distro 

But with this configuration I can’t use the software sound volume? How can I manage the sound-volume with Volumio?

The whole thing is quite frustrating....

Any help out there?

7 comments

Please sign in to leave a comment.