I noticed the S80 profile on the latest HiFiBerry OS release and I do have a pair of these speakers. Is there a guide available - at least for the correct wiring?
Date
Votes
1 comment
-
6515cg Yes, this is the correct wiring. Tip: you can re-use the overload led (brown=+) and connect it to the 5V+ Beocreate pin 1 and pin 2 (Gnd). Now you can see the Beocreate is on. Don't forget to put an extra 330 ohm resistor between the led + and the 5V.
Please sign in to leave a comment.