0

90W and 120W Power Brick for Beocreate

Ignas

December 08, 2019 21:59

None

Follow

Hi,

 

Are these a good match for Beocreate board? I'll be using it on pair of CX50 and a pair of CX100 later when I get them.

For CX50:

https://www.meanwell-web.com/en-gb/ac-dc-industrial-desktop-adaptor-with-pfc-input-3-gst90a24--p1m

For CX100:

https://www.meanwell-web.com/en-gb/ac-dc-industrial-desktop-adaptor-with-pfc-output-gst120a24--p1m

Would I need more for CX100 to utilize the speakers capabilities? Like 180W

 

Thanks,

Ignas

• Facebook
• Twitter
• LinkedIn

2 comments

• 0
  
  Ignas December 08, 2019 22:05

  Documentation here says 12-20V. But I saw somewhere that it supports up to 24V.

  https://www.hifiberry.com/beocreate/beocreate-doc/beocreate-hardware-documentation/

• 0
  
  HiFiBerry team December 09, 2019 05:34

  We don't recommend 24V as this just creates more heat. For a CX50/CX100, even 60W are almost overkill. This 60W power supply is our recommendation:
  https://www.hifiberry.com/shop/accessories/meanwell-gs60a18-p1j/
  
  Best regards,
  Daniel