0

HiFiBerryOS - Digi+ Pro - I2S SYNC error

Hi,

I am attempting to setup a new Raspberry Pi 3 B+ with only the Digi+ Pro I just received, for usage with Airplay.

I receive "I2C SYNC error" when connecting via Airplay, appreciate any help fixing the issue. HifiBerryOS shows correct 'Now Play Image'/Metadata via HDMI output, yet my external DAC does not detect any data stream from either digital outputs of the Digi+ Pro.

Currently using HiFiBerry v20191121, but issue also occurs with v20191030.

Thanks,
Tony

# amixer
Simple mixer control 'DSPVolume',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 255
Front Left: 230 [90%]
Front Right: 230 [90%]
Simple mixer control 'Softvol',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 255
Front Left: 140 [55%]
Front Right: 140 [55%]
Simple mixer control 'Tx Source',0
Capabilities: enum
Items: 'S/PDIF RX' 'AIF'
Item0: 'AIF'

# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_digi], device 0: HiFiBerry Digi+ Pro HiFi wm8804-spdif-0 [HiFiBerry Digi+ Pro HiFi wm8804-spdif-0]
Subdevices: 1/1
Subdevice #0: subdevice #0

# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.80-v7 (matuschd@power12) (gcc version 8.3.0 (Buildroot 2019.08.2)) #1 SMP Fri Nov 22 17:00:38 CET 2019
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x39400000
[ 0.000000] On node 0 totalpages: 236544
[ 0.000000] Normal zone: 2079 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 236544 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xb0/0x4b0 with crng_init=0
[ 0.000000] percpu: Embedded 16 pages/cpu s36684 r8192 d20660 u65536
[ 0.000000] pcpu-alloc: s36684 r8192 d20660 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 234465
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=/dev/mmcblk0p2 rootwait console=tty5 systemd.show_status=0 quiet splash
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 914720K/946176K available (8192K kernel code, 654K rwdata, 2224K rodata, 1024K init, 820K bss, 23264K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xba000000 - 0xff800000 (1112 MB)
lowmem : 0x80000000 - 0xb9c00000 ( 924 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x(ptrval) - 0x(ptrval) (9184 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 655 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 821 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 26787 entries in 79 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000276] Console: colour dummy device 80x30
[ 0.000294] console [tty5] enabled
[ 0.000336] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000353] pid_max: default: 32768 minimum: 301
[ 0.000681] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000697] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001626] CPU: Testing write buffer coherency: ok
[ 0.002088] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002738] Setting up static identity map for 0x100000 - 0x10003c
[ 0.002887] rcu: Hierarchical SRCU implementation.
[ 0.003673] smp: Bringing up secondary CPUs ...
[ 0.004520] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.005460] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.006319] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.006444] smp: Brought up 1 node, 4 CPUs
[ 0.006455] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.006461] CPU: All CPU(s) started in HYP mode.
[ 0.006466] CPU: Virtualization extensions available.
[ 0.007434] devtmpfs: initialized
[ 0.020367] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.020598] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.020618] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.021223] pinctrl core: initialized pinctrl subsystem
[ 0.022082] NET: Registered protocol family 16
[ 0.024928] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.030440] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.030449] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.030653] Serial: AMBA PL011 UART driver
[ 0.032958] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.068030] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.069679] SCSI subsystem initialized
[ 0.069901] usbcore: registered new interface driver usbfs
[ 0.069956] usbcore: registered new interface driver hub
[ 0.070097] usbcore: registered new device driver usb
[ 0.090112] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-11-19 16:43, variant start
[ 0.100335] raspberrypi-firmware soc:firmware: Firmware hash is 2354eac70a98807e06bed2149bc0c5613e751c15
[ 0.111585] clocksource: Switched to clocksource arch_sys_counter
[ 0.203256] VFS: Disk quotas dquot_6.6.0
[ 0.203339] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.203493] FS-Cache: Loaded
[ 0.203703] CacheFiles: Loaded
[ 0.213746] NET: Registered protocol family 2
[ 0.214579] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.214618] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.214727] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.214913] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.215051] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.215101] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.215334] NET: Registered protocol family 1
[ 0.215893] RPC: Registered named UNIX socket transport module.
[ 0.215900] RPC: Registered udp transport module.
[ 0.215905] RPC: Registered tcp transport module.
[ 0.215911] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.217100] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.220090] Initialise system trusted keyrings
[ 0.220286] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.230201] FS-Cache: Netfs 'nfs' registered for caching
[ 0.230757] NFS: Registering the id_resolver key type
[ 0.230781] Key type id_resolver registered
[ 0.230787] Key type id_legacy registered
[ 0.230804] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.233141] Key type asymmetric registered
[ 0.233151] Asymmetric key parser 'x509' registered
[ 0.233198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.233351] io scheduler noop registered
[ 0.233358] io scheduler deadline registered
[ 0.233539] io scheduler cfq registered (default)
[ 0.233547] io scheduler mq-deadline registered
[ 0.233553] io scheduler kyber registered
[ 0.235799] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.294488] Console: switching to colour frame buffer device 240x67
[ 0.329421] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
[ 0.331725] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.332052] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.332625] vc-sm: Videocore shared memory driver
[ 0.332948] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.343865] brd: module loaded
[ 0.354355] loop: module loaded
[ 0.354957] Loading iSCSI transport class v2.0-870.
[ 0.355681] libphy: Fixed MDIO Bus: probed
[ 0.355793] usbcore: registered new interface driver lan78xx
[ 0.355851] usbcore: registered new interface driver smsc95xx
[ 0.355868] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.383741] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.583992] Core Release: 2.80a
[ 0.584003] Setting default values for core params
[ 0.584030] Finished setting default values for core params
[ 0.784347] Using Buffer DMA mode
[ 0.784355] Periodic Transfer Interrupt Enhancement - disabled
[ 0.784361] Multiprocessor Interrupt Enhancement - disabled
[ 0.784369] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.784386] Dedicated Tx FIFOs mode
[ 0.784891] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = b9514000 dma = 0xf9514000 len=9024
[ 0.784918] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.784926] dwc_otg: Microframe scheduler enabled
[ 0.784988] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.785000] WARN::hcd_init_fiq:458: FIQ ASM at 8067bbb4 length 36
[ 0.785014] WARN::hcd_init_fiq:497: MPHI regs_base at ba010000
[ 0.785033] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.785066] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.785102] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.785152] Init: Port Power? op_state=1
[ 0.785158] Init: Power Port (0)
[ 0.785415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.785427] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.785437] usb usb1: Product: DWC OTG Controller
[ 0.785446] usb usb1: Manufacturer: Linux 4.19.80-v7 dwc_otg_hcd
[ 0.785454] usb usb1: SerialNumber: 3f980000.usb
[ 0.786102] hub 1-0:1.0: USB hub found
[ 0.786155] hub 1-0:1.0: 1 port detected
[ 0.786744] dwc_otg: FIQ enabled
[ 0.786749] dwc_otg: NAK holdoff enabled
[ 0.786755] dwc_otg: FIQ split-transaction FSM enabled
[ 0.786767] Module dwc_common_port init
[ 0.787040] usbcore: registered new interface driver usb-storage
[ 0.787224] mousedev: PS/2 mouse device common for all mice
[ 0.788072] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.788497] bcm2835-cpufreq: min=600000 max=1400000
[ 0.788975] sdhci: Secure Digital Host Controller Interface driver
[ 0.788981] sdhci: Copyright(c) Pierre Ossman
[ 0.789368] mmc-bcm2835 3f300000.mmcnr: could not get clk, deferring probe
[ 0.789761] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.789890] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.791453] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.791649] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.791864] usbcore: registered new interface driver usbhid
[ 0.791869] usbhid: USB HID core driver
[ 0.792717] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.794395] [vc_sm_connected_init]: start
[ 0.804275] [vc_sm_connected_init]: end - returning 0
[ 0.805381] Initializing XFRM netlink socket
[ 0.805408] NET: Registered protocol family 17
[ 0.805535] Key type dns_resolver registered
[ 0.805916] Registering SWP/SWPB emulation handler
[ 0.806590] registered taskstats version 1
[ 0.806609] Loading compiled-in X.509 certificates
[ 0.814116] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.814204] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.816181] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 0.816191] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 0.842358] sdhost: log_buf @ (ptrval) (f9513000)
[ 0.878702] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.880285] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.881872] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.884689] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.890782] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.892167] of_cfs_init
[ 0.892269] of_cfs_init: OK
[ 0.913627] Waiting for root device /dev/mmcblk0p2...
[ 0.958671] random: fast init done
[ 0.967397] mmc1: new high speed SDIO card at address 0001
[ 0.981323] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.984922] mmc0: new high speed SDHC card at address aaaa
[ 0.986123] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 0.989178] mmcblk0: p1 p2 p3 p4
[ 1.010179] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.010229] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.010833] devtmpfs: mounted
[ 1.015652] Freeing unused kernel memory: 1024K
[ 1.021737] Indeed it is in host mode hprt0 = 00021501
[ 1.082137] Run /sbin/init as init process
[ 1.231647] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.231799] Indeed it is in host mode hprt0 = 00001101
[ 1.371651] systemd[1]: System time before build time, advancing clock.
[ 1.472066] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.472083] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.474489] hub 1-1:1.0: USB hub found
[ 1.474582] hub 1-1:1.0: 4 ports detected
[ 1.477764] NET: Registered protocol family 10
[ 1.479092] Segment Routing with IPv6
[ 1.497711] systemd[1]: systemd 241 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 1.498582] systemd[1]: Detected architecture arm.
[ 1.510188] systemd[1]: Set hostname to <HiFiBerry>.
[ 1.518479] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 1.580038] systemd-fstab-generator[80]: Ignoring "noauto" for root device
[ 1.801060] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/mpd.service target ../../../../usr/lib/systemd/system/shairport-sync.service has different name
[ 1.801658] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.932014] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 1.932029] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.932741] hub 1-1.1:1.0: USB hub found
[ 1.932837] hub 1-1.1:1.0: 3 ports detected
[ 1.962975] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/mpd.service target ../../../../usr/lib/systemd/system/shairport-sync.service has different name
[ 1.971953] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/mpd.service target ../../../../usr/lib/systemd/system/shairport-sync.service has different name
[ 1.979532] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/mpd.service target ../../../../usr/lib/systemd/system/shairport-sync.service has different name
[ 2.082150] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.086993] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/mpd.service target ../../../../usr/lib/systemd/system/shairport-sync.service has different name
[ 2.100833] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.106652] systemd[1]: Created slice system-wpa_supplicant.slice.
[ 2.107020] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.285870] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ 2.378879] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 2.478033] systemd-journald[102]: Received request to flush runtime journal from PID 1
[ 2.496356] systemd-journald[102]: File /var/log/journal/38ca1e2f95104555946313d789a29f0c/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 2.760865] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.764645] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 2.764668] [vc_sm_connected_init]: start
[ 2.781994] [vc_sm_connected_init]: installed successfully
[ 2.782012] media: Linux media interface: v0.10
[ 2.818213] videodev: Linux video capture interface: v2.00
[ 2.832506] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[ 2.892510] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.893716] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.920148] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.925723] snd-rpi-wm8804 soc:sound: ASoC: CPU DAI (null) not registered - will retry
[ 2.927770] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.928851] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 2.942670] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 2.942723] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 2.945872] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 2.945944] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 2.949653] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 2.949694] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 2.950440] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 2.962372] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00
[ 2.962391] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.074557] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.170427] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.226673] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed
[ 3.227740] libphy: lan78xx-mdiobus: probed
[ 3.265603] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb period 64
[ 3.267750] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 3.268943] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 3.273116] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.281223] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 3.282208] usbcore: registered new interface driver brcmfmac
[ 3.282733] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 3.355501] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 3.356428] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 3.370583] wm8804 1-003b: 1-003b supply PVDD not found, using dummy regulator
[ 3.370673] wm8804 1-003b: Linked as a consumer to regulator.0
[ 3.370690] wm8804 1-003b: 1-003b supply DVDD not found, using dummy regulator
[ 3.377214] wm8804 1-003b: revision E
[ 3.385888] snd-rpi-wm8804 soc:sound: wm8804-spdif <-> 3f203000.i2s mapping ok
[ 3.505333] random: crng init done
[ 3.505346] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.511140] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.511193] A link change request failed with some changes committed already. Interface eth0 may have been left with an inconsistent configuration, please check.
[ 3.527020] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 3.542627] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 3.639509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.639527] brcmfmac: power management disabled
[ 3.639983] A link change request failed with some changes committed already. Interface wlan0 may have been left with an inconsistent configuration, please check.
[ 4.954609] systemd-journald[102]: Failed to create new user journal: No space left on device
[ 4.995339] systemd-journald[102]: Failed to read journal file /var/log/journal/38ca1e2f95104555946313d789a29f0c/user-1010.journal for rotation, trying to move it out of the way: Bad message
[ 5.229007] EXT4-fs (mmcblk0p2): resizing filesystem from 512000 to 1048572 blocks
[ 5.390200] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.412201] uart-pl011 3f201000.serial: no DMA platform data
[ 5.644504] EXT4-fs (mmcblk0p2): resized filesystem to 1048572
[ 5.909748] systemd-fstab-generator[247]: Ignoring "noauto" for root device
[ 6.063575] Bluetooth: Core ver 2.22
[ 6.063713] NET: Registered protocol family 31
[ 6.063720] Bluetooth: HCI device and connection manager initialized
[ 6.065075] Bluetooth: HCI socket layer initialized
[ 6.065097] Bluetooth: L2CAP socket layer initialized
[ 6.065154] Bluetooth: SCO socket layer initialized
[ 6.084786] Bluetooth: HCI UART driver ver 2.3
[ 6.084803] Bluetooth: HCI UART protocol H4 registered
[ 6.084959] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.086132] Bluetooth: HCI UART protocol Broadcom registered
[ 6.581938] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.308800] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.308815] Bluetooth: BNEP filters: protocol multicast
[ 7.308843] Bluetooth: BNEP socket layer initialized
[ 23.824652] input: Virtual Keyboard as /devices/virtual/input/input0
[ 28.700123] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
[ 284.045199] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
[ 311.554587] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
#

8 comments

Please sign in to leave a comment.