0

Hifiberry digi should work but it doesn't :(

Hi. I have this annoying problem with my digi pro.

It works in libreelec so im sure that's not a hardware issue. Here is some data to help with troubleshooting 

pi@raspberrypi:~ $ amixer
Simple mixer control 'Tx Source',0
Capabilities: enum
Items: 'S/PDIF RX' 'AIF'
Item0: 'S/PDIF RX'
pi@raspberrypi:~ $

pi@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_digi], device 0: HiFiBerry Digi+ Pro HiFi wm8804-spdif-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
pi@raspberrypi:~ $

 

config.cfg parameters:

dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=spi=on
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
gpu_mem=512
dtoverlay=hifiberry-digi
dtdebug=1

pi@raspberrypi:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.75-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1270 SMP Tue Sep 24 18:51:41 BST 2019
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 256 MiB at 0x000000000fc00000
[ 0.000000] On node 0 totalpages: 901120
[ 0.000000] DMA zone: 1152 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 131072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 770048 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
[ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 899968
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:2560x1080M@60,margin_left=0,margin_right=0,margin_top=0,margin_bottom=0 smsc95xx.macaddr=DC:A6:32:23:19:42 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=5cfd3419-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait consoleblank=0
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 3293436K/3604480K available (8192K kernel code, 661K rwdata, 2352K rodata, 2048K init, 850K bss, 48900K reserved, 262144K cma-reserved, 3080192K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0x(ptrval) - 0x(ptrval) (10208 kB)
.init : 0x(ptrval) - 0x(ptrval) (2048 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 662 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 851 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 28124 entries in 83 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000022] Switching to timer-based delay loop, resolution 18ns
[ 0.000252] Console: colour dummy device 80x30
[ 0.000720] console [tty1] enabled
[ 0.000774] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.000816] pid_max: default: 32768 minimum: 301
[ 0.001093] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001123] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001890] CPU: Testing write buffer coherency: ok
[ 0.002332] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002995] Setting up static identity map for 0x200000 - 0x20003c
[ 0.003168] rcu: Hierarchical SRCU implementation.
[ 0.004052] smp: Bringing up secondary CPUs ...
[ 0.004995] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.006052] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.007052] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.007184] smp: Brought up 1 node, 4 CPUs
[ 0.007251] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.007274] CPU: All CPU(s) started in HYP mode.
[ 0.007294] CPU: Virtualization extensions available.
[ 0.008049] devtmpfs: initialized
[ 0.018511] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.018756] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.018798] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.026354] pinctrl core: initialized pinctrl subsystem
[ 0.027237] NET: Registered protocol family 16
[ 0.030316] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.031751] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.031783] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.032007] Serial: AMBA PL011 UART driver
[ 0.035067] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.071304] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.073672] vgaarb: loaded
[ 0.074069] SCSI subsystem initialized
[ 0.074279] usbcore: registered new interface driver usbfs
[ 0.074347] usbcore: registered new interface driver hub
[ 0.074455] usbcore: registered new device driver usb
[ 0.090426] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-09-24 17:34, variant start
[ 0.100107] raspberrypi-firmware soc:firmware: Firmware hash is cd3add54955f8fa065b414d8fc07c525e7ddffc8
[ 0.111655] clocksource: Switched to clocksource arch_sys_counter
[ 0.189364] VFS: Disk quotas dquot_6.6.0
[ 0.189469] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.189666] FS-Cache: Loaded
[ 0.189863] CacheFiles: Loaded
[ 0.190474] simple-framebuffer 3e7fe000.framebuffer: framebuffer at 0x3e7fe000, 0x3fc000 bytes, mapped to 0x(ptrval)
[ 0.190511] simple-framebuffer 3e7fe000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[ 0.197915] Console: switching to colour frame buffer device 240x67
[ 0.204689] simple-framebuffer 3e7fe000.framebuffer: fb0: simplefb registered!
[ 0.213792] NET: Registered protocol family 2
[ 0.214478] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.214562] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.214656] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.214744] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.214913] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.214980] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.215324] NET: Registered protocol family 1
[ 0.215934] RPC: Registered named UNIX socket transport module.
[ 0.215992] RPC: Registered udp transport module.
[ 0.216038] RPC: Registered tcp transport module.
[ 0.216084] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.216144] PCI: CLS 0 bytes, default 64
[ 0.219132] Initialise system trusted keyrings
[ 0.219347] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[ 0.228430] FS-Cache: Netfs 'nfs' registered for caching
[ 0.228974] NFS: Registering the id_resolver key type
[ 0.229048] Key type id_resolver registered
[ 0.229092] Key type id_legacy registered
[ 0.229143] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.231449] Key type asymmetric registered
[ 0.231498] Asymmetric key parser 'x509' registered
[ 0.231712] bounce: pool size: 64 pages
[ 0.231791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.232007] io scheduler noop registered
[ 0.232054] io scheduler deadline registered (default)
[ 0.232247] io scheduler cfq registered
[ 0.232290] io scheduler mq-deadline registered (default)
[ 0.232340] io scheduler kyber registered
[ 0.266396] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000
[ 0.266490] brcm-pcie fd500000.pcie: could not get clock
[ 0.266593] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.268615] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 0.321688] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 0.323927] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.325888] pci_bus 0000:00: root bus resource [bus 00-01]
[ 0.327832] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.329828] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.329971] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.332806] PCI: bus0: Fast back to back transfers disabled
[ 0.334776] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.336903] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.336964] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.337133] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.339813] PCI: bus1: Fast back to back transfers disabled
[ 0.341825] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[ 0.341872] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.343870] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.345852] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.347819] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.350000] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.352177] pcieport 0000:00:00.0: Signaling PME with IRQ 57
[ 0.354328] pcieport 0000:00:00.0: AER enabled with IRQ 57
[ 0.356458] pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 0.361778] iproc-rng200 fe104000.rng: hwrng registered
[ 0.363984] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.366486] vc-sm: Videocore shared memory driver
[ 0.368849] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 0.380922] brd: module loaded
[ 0.392796] loop: module loaded
[ 0.395533] Loading iSCSI transport class v2.0-870.
[ 0.399179] libphy: Fixed MDIO Bus: probed
[ 0.401559] bcmgenet fd580000.genet: failed to get enet clock
[ 0.403570] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[ 0.405516] bcmgenet fd580000.genet: failed to get enet-wol clock
[ 0.407439] bcmgenet fd580000.genet: failed to get enet-eee clock
[ 0.409345] bcmgenet: Skipping UMAC reset
[ 0.411434] unimac-mdio unimac-mdio.-19: DMA mask not set
[ 0.431694] libphy: bcmgenet MII bus: probed
[ 0.472198] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
[ 0.474968] usbcore: registered new interface driver r8152
[ 0.476891] usbcore: registered new interface driver lan78xx
[ 0.478778] usbcore: registered new interface driver smsc95xx
[ 0.480803] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.482679] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.486595] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
[ 0.488596] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 58
[ 0.491056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.492969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.494862] usb usb1: Product: xHCI Host Controller
[ 0.496746] usb usb1: Manufacturer: Linux 4.19.75-v7l+ xhci-hcd
[ 0.498631] usb usb1: SerialNumber: 0000:01:00.0
[ 0.501006] hub 1-0:1.0: USB hub found
[ 0.502946] hub 1-0:1.0: 1 port detected
[ 0.505205] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.507070] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.508957] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 0.511145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.513057] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.514938] usb usb2: Product: xHCI Host Controller
[ 0.516808] usb usb2: Manufacturer: Linux 4.19.75-v7l+ xhci-hcd
[ 0.518676] usb usb2: SerialNumber: 0000:01:00.0
[ 0.521008] hub 2-0:1.0: USB hub found
[ 0.522940] hub 2-0:1.0: 4 ports detected
[ 0.525902] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.553353] dwc_otg fe980000.usb: base=(ptrval)
[ 0.755510] Core Release: 2.80a
[ 0.757355] Setting default values for core params
[ 0.759201] Finished setting default values for core params
[ 0.961353] Using Buffer DMA mode
[ 0.963202] Periodic Transfer Interrupt Enhancement - disabled
[ 0.965042] Multiprocessor Interrupt Enhancement - disabled
[ 0.966888] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.968763] Dedicated Tx FIFOs mode
[ 0.970931] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = cfd38000 dma = 0x00000000cfd38000 len=9024
[ 0.972848] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.981855] dwc_otg: Microframe scheduler enabled
[ 0.981916] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.983729] WARN::hcd_init_fiq:458: FIQ ASM at c07b6224 length 36
[ 0.985535] WARN::hcd_init_fiq:497: MPHI regs_base at e0810200
[ 0.987363] dwc_otg fe980000.usb: DWC OTG Controller
[ 0.989188] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
[ 0.991026] dwc_otg fe980000.usb: irq 39, io mem 0x00000000
[ 0.992903] Init: Port Power? op_state=1
[ 0.994694] Init: Power Port (0)
[ 0.996706] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.998502] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.000283] usb usb3: Product: DWC OTG Controller
[ 1.002089] usb usb3: Manufacturer: Linux 4.19.75-v7l+ dwc_otg_hcd
[ 1.003882] usb usb3: SerialNumber: fe980000.usb
[ 1.006156] hub 3-0:1.0: USB hub found
[ 1.007972] hub 3-0:1.0: 1 port detected
[ 1.010349] dwc_otg: FIQ enabled
[ 1.010358] dwc_otg: NAK holdoff enabled
[ 1.010367] dwc_otg: FIQ split-transaction FSM enabled
[ 1.010381] Module dwc_common_port init
[ 1.010602] usbcore: registered new interface driver uas
[ 1.012548] usbcore: registered new interface driver usb-storage
[ 1.014489] mousedev: PS/2 mouse device common for all mice
[ 1.017468] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.019504] bcm2835-cpufreq: min=600000 max=1500000
[ 1.021935] sdhci: Secure Digital Host Controller Interface driver
[ 1.023727] sdhci: Copyright(c) Pierre Ossman
[ 1.025885] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 1.028076] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.032948] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.034926] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.036915] usbcore: registered new interface driver usbhid
[ 1.038742] usbhid: USB HID core driver
[ 1.041295] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 1.044958] [vc_sm_connected_init]: start
[ 1.056288] [vc_sm_connected_init]: end - returning 0
[ 1.059191] Initializing XFRM netlink socket
[ 1.061000] NET: Registered protocol family 17
[ 1.062901] Key type dns_resolver registered
[ 1.065008] Registering SWP/SWPB emulation handler
[ 1.067351] registered taskstats version 1
[ 1.069144] Loading compiled-in X.509 certificates
[ 1.078637] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.080529] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[ 1.085376] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.087706] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 1.090152] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.092035] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.119886] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
[ 1.122060] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1.141818] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.145327] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.148788] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.153521] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.156553] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 1.158269] usb 2-1: New USB device found, idVendor=0bc2, idProduct=ab45, bcdDevice=48.85
[ 1.160313] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.160790] of_cfs_init
[ 1.162337] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.164236] of_cfs_init: OK
[ 1.166013] usb 2-1: Product: Backup+ Hub
[ 1.169798] usb 2-1: Manufacturer: Seagate
[ 1.169807] usb 2-1: SerialNumber: 01CB6342B2LQ
[ 1.174160] hub 2-1:1.0: USB hub found
[ 1.176316] hub 2-1:1.0: 3 ports detected
[ 1.179968] Waiting for root device PARTUUID=5cfd3419-02...
[ 1.201486] mmc0: new high speed SDHC card at address b368
[ 1.204696] mmcblk0: mmc0:b368 NCard 14.9 GiB
[ 1.208364] mmcblk0: p1 p2
[ 1.211470] random: fast init done
[ 1.225127] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.227001] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.230141] devtmpfs: mounted
[ 1.238204] Freeing unused kernel memory: 2048K
[ 1.240198] mmc1: new high speed SDIO card at address 0001
[ 1.281910] Run /sbin/init as init process
[ 1.301689] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.483826] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[ 1.485739] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.487579] usb 1-1: Product: USB2.0 Hub
[ 1.491175] hub 1-1:1.0: USB hub found
[ 1.493259] hub 1-1:1.0: 4 ports detected
[ 1.582064] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 1.612900] usb 2-1.1: New USB device found, idVendor=0bc2, idProduct=ab38, bcdDevice= 1.00
[ 1.614834] usb 2-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.616713] usb 2-1.1: Product: Backup+ Hub BK
[ 1.618606] usb 2-1.1: Manufacturer: Seagate
[ 1.620451] usb 2-1.1: SerialNumber: NA8T1B7G
[ 1.645482] scsi host0: uas
[ 1.648908] scsi 0:0:0:0: Direct-Access Seagate Backup+ Hub BK D781 PQ: 0 ANSI: 6
[ 1.652349] sd 0:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.654256] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.656281] sd 0:0:0:0: [sda] Write Protect is off
[ 1.658150] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[ 1.658470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.661043] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[ 1.675836] sda: sda1 sda2
[ 1.680526] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.841714] usb 1-1.1: new high-speed USB device number 3 using xhci_hcd
[ 1.984385] usb 1-1.1: New USB device found, idVendor=0bc2, idProduct=ab44, bcdDevice=48.85
[ 1.986390] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.988320] usb 1-1.1: Product: Backup+ Hub
[ 1.990234] usb 1-1.1: Manufacturer: Seagate
[ 1.992175] usb 1-1.1: SerialNumber: 01CB6342B2LQ
[ 1.996017] hub 1-1.1:1.0: USB hub found
[ 1.998296] hub 1-1.1:1.0: 3 ports detected
[ 2.018050] systemd[1]: System time before build time, advancing clock.
[ 2.101698] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
[ 2.164475] NET: Registered protocol family 10
[ 2.167587] Segment Routing with IPv6
[ 2.222103] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.226853] systemd[1]: Detected architecture arm.
[ 2.239540] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=67.00
[ 2.241625] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.243756] usb 1-1.3: Product: USB Optical Mouse
[ 2.245863] usb 1-1.3: Manufacturer: Logitech
[ 2.266700] input: Logitech USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C077.0001/input/input0
[ 2.269044] systemd[1]: Set hostname to <raspberrypi>.
[ 2.272199] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:01:00.0-1.3/input0
[ 2.280760] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 2.371737] usb 1-1.4: new low-speed USB device number 5 using xhci_hcd
[ 2.517207] usb 1-1.4: New USB device found, idVendor=045e, idProduct=0780, bcdDevice= 1.70
[ 2.519531] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.521892] usb 1-1.4: Product: Comfort Curve Keyboard 3000
[ 2.524186] usb 1-1.4: Manufacturer: Microsoft
[ 2.544767] input: Microsoft Comfort Curve Keyboard 3000 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:0780.0002/input/input1
[ 2.612275] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:01:00.0-1.4/input0
[ 2.626046] input: Microsoft Comfort Curve Keyboard 3000 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:045E:0780.0003/input/input2
[ 2.651030] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 2.653670] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 2.691920] hid-generic 0003:045E:0780.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:01:00.0-1.4/input1
[ 3.102948] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.114429] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.117489] systemd[1]: Listening on udev Kernel Socket.
[ 3.151535] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 3.154458] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.157794] systemd[1]: Listening on Journal Socket.
[ 3.173043] systemd[1]: Mounting RPC Pipe File System...
[ 3.435962] i2c /dev entries driver
[ 4.115687] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.222946] systemd-journald[112]: Received request to flush runtime journal from PID 1
[ 4.897756] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
[ 4.899163] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
[ 4.907065] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
[ 4.909536] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.910565] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
[ 4.911628] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 4.919593] [vc_sm_connected_init]: start
[ 4.923361] [vc_sm_connected_init]: installed successfully
[ 4.947041] media: Linux media interface: v0.10
[ 4.988412] videodev: Linux video capture interface: v2.00
[ 5.125152] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.126499] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.172256] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.289370] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 5.316677] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.358193] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 5.358231] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 5.376345] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 5.376384] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 5.401167] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 5.401203] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 5.402280] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 5.403606] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.544818] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.572747] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 5.582006] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 5.624764] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 5.629039] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 5.632538] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 5.647994] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.648668] usbcore: registered new interface driver brcmfmac
[ 5.649153] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 5.695333] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[ 5.695364] checking generic (3e7fe000 3fc000) vs hw (0 ffffffffffffffff)
[ 5.695379] fb: switching to vc4drmfb from simple
[ 5.695667] Console: switching to colour dummy device 80x30
[ 5.705991] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
[ 5.706006] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.706015] [drm] No driver support for vblank timestamp query.
[ 5.706024] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[ 5.899577] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 5.913228] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: May 2 2019 02:46:17 version 7.45.189 (r714228 CY) FWID 01-e1db26e2
[ 5.929533] Console: switching to colour frame buffer device 320x67
[ 5.973434] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
[ 6.062390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.159593] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 6.190232] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 6.190839] snd-rpi-wm8804 soc:sound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[ 6.314610] wm8804 1-003b: Linked as a consumer to regulator.2
[ 6.319077] wm8804 1-003b: revision E
[ 6.331060] snd-rpi-wm8804 soc:sound: wm8804-spdif <-> fe203000.i2s mapping ok
[ 8.014512] uart-pl011 fe201000.serial: no DMA platform data
[ 8.193015] random: crng init done
[ 8.193027] random: 7 urandom warning(s) missed due to ratelimiting
[ 8.701734] 8021q: 802.1Q VLAN Support v1.8
[ 9.032776] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 9.057106] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.057125] brcmfmac: power management disabled
[ 9.679724] bcmgenet: Skipping UMAC reset
[ 9.771918] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[ 9.772154] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.364852] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.378529] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.791765] bcmgenet fd580000.genet eth0: Link is Down
[ 10.908635] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.908927] brcmfmac: power management disabled
[ 14.726369] Bluetooth: Core ver 2.22
[ 14.726452] NET: Registered protocol family 31
[ 14.726463] Bluetooth: HCI device and connection manager initialized
[ 14.726485] Bluetooth: HCI socket layer initialized
[ 14.726502] Bluetooth: L2CAP socket layer initialized
[ 14.726550] Bluetooth: SCO socket layer initialized
[ 14.743718] Bluetooth: HCI UART driver ver 2.3
[ 14.743726] Bluetooth: HCI UART protocol H4 registered
[ 14.743768] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.743886] Bluetooth: HCI UART protocol Broadcom registered
[ 14.951805] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 14.951828] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.126539] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.126545] Bluetooth: BNEP filters: protocol multicast
[ 15.126556] Bluetooth: BNEP socket layer initialized
[ 15.175468] Bluetooth: RFCOMM TTY layer initialized
[ 15.175482] Bluetooth: RFCOMM socket layer initialized
[ 15.175498] Bluetooth: RFCOMM ver 1.11
[ 17.527407] fuse init (API version 7.27)
pi@raspberrypi:~ $

https://imgur.com/a/kyV1ypu

I also deleted everything from blacklists. There's no light on spdif. That's how i can tell it's not working.

4 comments

Please sign in to leave a comment.