1

Error in Spotifyd

Vicente Pazo

May 20, 2018 14:55

None

Follow

Good afternoon, 

During today I tried to configure other CX100, but the Spotify Connect did not work. 

I executed this command.

sudo /opt/spotifyd/spotifyd -c /etc/spotifyd.conf --no-daemon --verbose

And I found this error when connecting a device to the CX100:

[ERROR] Caught panic with message: called `Result::unwrap()` on an `Err` value: WireError(InvalidEnumValue(14))

After investigating a bit, it seems to be a problem in the Spotifyd, nothing related to our CX100. 

You can check it here:

https://github.com/Spotifyd/spotifyd/issues/137

There it is said:

"I'll merge it on Monday night when I'm back home."

So I hope tomorrow I can fix the issue. 

I am writing it here just in case someone faces the same error, to avoid getting nuts with it. 

Regards!

 

• Facebook
• Twitter
• LinkedIn

4 comments

• 1
  
  Andy McFarland June 09, 2018 12:01

  I was getting the same problem as you. I was using the "Release 3" of the Beocreate installer which installs untagged-2cb556328b5f57a0fe2b/spotifyd-2018-01-14-armv7.zip

  I modified the installer to use the more recent https://github.com/Spotifyd/spotifyd/releases/download/v0.2.1/spotifyd-2018-05-29-armv6.zip

  The old version died fairly quickly, this newer one is working ok so far...

• 0
  
  HiFiBerry team June 10, 2018 08:03

  Thanks for the feedback. I expect that there will be a new Beocreate image in the next few weeks that will use the newer version.

  Best regards,
  Daniel

• 0
  
  Andy McFarland June 10, 2018 09:23

  Thanks Daniel, 

  I made an issue / pull request on the githib repo - https://github.com/bang-olufsen/create/pull/10/files

  It's still alive and working after 24 hours on this version.

  It seems to often start playback with an audible click, but I only put my cx-100 together a week ago so I don't know if that's new behaviour or not.

  Regards.

   

• 0
  
  Crilles Bak Rasmussen July 04, 2018 19:49

  @andy, thanks for a very useful fix :-)