0

Modify DSP registers on the fly via Beocreate-client / SigmaClientTool

Hi @all,

i have a working Setup with beocreate / raspberry 3B+ / and Sigma Studio. Just installed sigmatcpserver and SigmaClientTool on Raspbian Stretch Lite. Uploading programs and changing Settings (e.g. Volume) on the fly through Sigma Studio works perfect.

The problem: changing DSP Registers via SigmaClientTool on the console does not work:

root@raspberrypi:/home/pi/beocreate-tools/create/SigmaClientTool/build# ./SigmaClientTool 127.0.0.1 write_val 0x007d 0
Initializing connection to 127.0.0.1

root@raspberrypi:/home/pi/beocreate-tools/create/SigmaClientTool/build#

 

-> No error, but no effect. But reading values works (value is changing if volume is changed in Sigma Studio):

root@raspberrypi:/home/pi/beocreate-tools/create/SigmaClientTool/build# ./SigmaClientTool 127.0.0.1 read_dec 0x007d 4
Initializing connection to 127.0.0.1
Reading value from 0x007d
1:

root@raspberrypi:/home/pi/beocreate-tools/create/SigmaClientTool/build#

 

Hope you can help me.

Thanks,

Pierre

 

 

2 comments

Please sign in to leave a comment.