Problem with HiFiBerry RPi 3B+ DAC+ Pro setup:
I have 2 devices containing music files: a USB flash drive and a USB SSD, and have used each in the R Pi w/ Volumio. When I insert either into a PC running Windows 10, to add more files, I get :
Do you want to scan and fix [USB drive] ?
There might be a problem with some files on this device or disc. This can happen if you remove the device or disc before all files have been written to it.
[Scan and fix (recommended)]
[Continue without scanning]
For the thumb drive, I did the Scan and fix, and it wiped out the contents! (I do have a backup)
The contents of the drives are visible and I can navigate to folders, but cannot write to them.
I try to write anything to the device (before the scan/fix), I get a Copy File error:
An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x80071AC3: The operation could not be completed because the volume is dirty. Please run chkdsk and try again.
Any ideas ? The SSD (SanDisk Extreme 500gb is exFAT.