1

No Sound on HifiBerry DAC+ on Raspberry Pi 3 B+ with max2play

Hello,

I’ve bought  hifiberry on official site : HifiBerry DAC+ on Raspberry Pi 3 B+ and I’ve installed Max2Play on existing micro sd card.

This is the steps I’ve followed :
– Installation of max2play (downloaded m2p_stretch_rpi_245.img as it was indicated that it supports Raspberry Pi 3 model B+)
– licence activation (unfortunately, I can’t manage to link it to my account on the forum because I don’t find licence code, as soon as I put my mail, the licence has been activated but no way to find the licence code)
– maj of max2play + reboot -> Version 2.46 wrote on the top right corner of web page
– For the soundcard choice, I choose “HifiBerry DAC+ (B+ / Pi 2/3)
– To begin by an easy install for the moment, I choose airplay installation (but later, I will try the advanced to have also the squeezebox server) + reboot

After, I have 3 cursors (Parametres Digital Volume + analogue playback boost + Analogue Boost) on the main page at 0%, but when I try to put them to 100% and save, I have an error (I uploaded it)

https://image.ibb.co/cZRpZ7/Capture_d_e_cran_2018_04_21_a_10_47_50.png

So I have no sound because of that :(.

Do you have an idea on the problem?

This is some additionnal informations by connecting with ssh:

pi@Max2Play:~ $ cat /boot/config.txt
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details

# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1

# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1

# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16

# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720

# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1

# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1

# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2

# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4

# uncomment for composite PAL
#sdtv_mode=2

#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800

# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on

# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi

# Additional overlays and parameters are documented /boot/overlays/README

# Enable audio (loads snd_bcm2835)
dtparam=audio=on
gpu_mem=128
dtoverlay=hifiberry-dacplus
disable_overscan=1

# Add debug information
dtdebug=1


On <a href="https://support.hifiberry.com/hc/en-us/articles/205377651-Configuring-Linux-4-x-or-higher">https://support.hifiberry.com/hc/en-us/articles/205377651-Configuring-Linux-4-x-or-higher</a>, they said we have to deactivate it, I didn't try for the moment.

`$ lsmod
Module Size Used by
fuse 106496 3
cmac 16384 1
bnep 20480 2
hci_uart 24576 1
bluetooth 368640 23 hci_uart,bnep
ecdh_generic 28672 1 bluetooth
uinput 20480 1
snd_soc_pcm512x_i2c 16384 0
snd_soc_pcm512x 32768 1 snd_soc_pcm512x_i2c
brcmfmac 307200 0
brcmutil 16384 1 brcmfmac
cfg80211 573440 1 brcmfmac
rfkill 28672 4 bluetooth,cfg80211
snd_bcm2835 32768 1
snd_soc_hifiberry_dacplus 16384 0
snd_soc_bcm2835_i2s 16384 0
snd_soc_core 188416 3 snd_soc_pcm512x,snd_soc_hifiberry_dacplus,snd_soc_bcm2835_i2s
snd_compress 20480 1 snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_pcm 98304 6 snd_soc_pcm512x,snd_pcm_dmaengine,snd_soc_hifiberry_dacplus,snd_soc_bcm2835_i2s,snd_bcm2835,snd_soc_core
snd_timer 32768 1 snd_pcm
i2c_bcm2835 16384 0
snd 69632 7 snd_compress,snd_timer,snd_bcm2835,snd_soc_core,snd_pcm
microchip 16384 1
clk_hifiberry_dacpro 16384 0
fixed 16384 0
uio_pdrv_genirq 16384 0
uio 20480 1 uio_pdrv_genirq
lan78xx 45056 0
libphy 65536 2 lan78xx,microchip
ip_tables 24576 0
x_tables 28672 1 ip_tables
ipv6 434176 28`

 


`$ aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: ALSA [bcm2835 ALSA], périphérique 0: bcm2835 ALSA [bcm2835 ALSA]
Sous-périphériques: 7/7
Sous-périphérique #0: subdevice #0
Sous-périphérique #1: subdevice #1
Sous-périphérique #2: subdevice #2
Sous-périphérique #3: subdevice #3
Sous-périphérique #4: subdevice #4
Sous-périphérique #5: subdevice #5
Sous-périphérique #6: subdevice #6
carte 0: ALSA [bcm2835 ALSA], périphérique 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0`


`pi@Max2Play:~ $ sudo aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: ALSA [bcm2835 ALSA], périphérique 0: bcm2835 ALSA [bcm2835 ALSA]
Sous-périphériques: 7/7
Sous-périphérique #0: subdevice #0
Sous-périphérique #1: subdevice #1
Sous-périphérique #2: subdevice #2
Sous-périphérique #3: subdevice #3
Sous-périphérique #4: subdevice #4
Sous-périphérique #5: subdevice #5
Sous-périphérique #6: subdevice #6
carte 0: ALSA [bcm2835 ALSA], périphérique 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0`

`pi@Max2Play:~ $ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
equal
plugequal
Equalizer for plughw:0,0
default:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio Device
sysdefault:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio Device
dmix:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct sample mixing device
dmix:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct sample mixing device
dsnoop:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct sample snooping device
dsnoop:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct sample snooping device
hw:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct hardware device without any conversions
hw:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct hardware device without any conversions
plughw:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Hardware device with all software conversions
plughw:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Hardware device with all software conversions`

 

 

`pi@Max2Play:~ $ cat /etc/asound.conf
ctl.!default {
type hw
card 0
}
pcm.equal {
type plug;
slave.pcm plugequal;
}
ctl.equal {
type equal;
module "Eq10";
}

pcm.plugequal {
type equal;
module "Eq10";
slave {
pcm "plughw:0,0";
}
hint {show on;description "Equalizer for plughw:0,0"}
}`


I added "dtdebug = 1" in config.txt.

`pi@Max2Play:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.24-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1097 SMP Mon Mar 5 16:42:05 GMT 2018
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Plus Rev 1.3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x37800000
[ 0.000000] On node 0 totalpages: 229376
[ 0.000000] free_area_init_node: node 0, pgdat 80c7e800, node_mem_map b7016000
[ 0.000000] Normal zone: 2016 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 229376 pages, LIFO batch:31
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 17 pages/cpu @b6fc4000 s38720 r8192 d22720 u69632
[ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227360
[ 0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=ee397c53-02 rootfstype=ext4 elevator=deadline fsck.repair=yes net.ifnames=0 biosdevname=0 avoid_safe_mode=1 rootwait quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 887508K/917504K available (7168K kernel code, 548K rwdata, 2028K rodata, 1024K init, 706K bss, 21804K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xb8800000 - 0xff800000 (1136 MB)
lowmem : 0x80000000 - 0xb8000000 ( 896 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x80800000 (8160 kB)
.init : 0x80b00000 - 0x80c00000 (1024 kB)
.data : 0x80c00000 - 0x80c89244 ( 549 kB)
.bss : 0x80c90ed4 - 0x80d417b4 ( 707 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 24646 entries in 73 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000018] Switching to timer-based delay loop, resolution 52ns
[ 0.000281] Console: colour dummy device 80x30
[ 0.000298] console [tty1] enabled
[ 0.000323] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000337] pid_max: default: 32768 minimum: 301
[ 0.000647] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000661] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001591] Disabling memory control group subsystem
[ 0.001671] CPU: Testing write buffer coherency: ok
[ 0.002047] CPU0: update cpu_capacity 1024
[ 0.002055] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002431] Setting up static identity map for 0x100000 - 0x10003c
[ 0.002548] Hierarchical SRCU implementation.
[ 0.003180] smp: Bringing up secondary CPUs ...
[ 0.003810] CPU1: update cpu_capacity 1024
[ 0.003817] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004527] CPU2: update cpu_capacity 1024
[ 0.004534] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.005233] CPU3: update cpu_capacity 1024
[ 0.005240] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.005342] smp: Brought up 1 node, 4 CPUs
[ 0.005352] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.005357] CPU: All CPU(s) started in HYP mode.
[ 0.005362] CPU: Virtualization extensions available.
[ 0.006189] devtmpfs: initialized
[ 0.015545] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.015763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.015780] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.016334] pinctrl core: initialized pinctrl subsystem
[ 0.017079] NET: Registered protocol family 16
[ 0.019766] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.024674] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.024682] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.024861] Serial: AMBA PL011 UART driver
[ 0.026464] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.026910] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.058375] bcm2835-dma 3f007000.dma: DMA legacy API manager at b880d000, dmachans=0x1
[ 0.059774] SCSI subsystem initialized
[ 0.059905] usbcore: registered new interface driver usbfs
[ 0.059956] usbcore: registered new interface driver hub
[ 0.060138] usbcore: registered new device driver usb
[ 0.070104] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-03-13 18:45
[ 0.071512] clocksource: Switched to clocksource arch_sys_counter
[ 0.147873] VFS: Disk quotas dquot_6.6.0
[ 0.147959] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.148144] FS-Cache: Loaded
[ 0.148337] CacheFiles: Loaded
[ 0.157041] NET: Registered protocol family 2
[ 0.157765] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.157874] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.158059] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.158188] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.158232] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.158460] NET: Registered protocol family 1
[ 0.158898] RPC: Registered named UNIX socket transport module.
[ 0.158904] RPC: Registered udp transport module.
[ 0.158909] RPC: Registered tcp transport module.
[ 0.158914] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.160479] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.163327] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.171317] FS-Cache: Netfs 'nfs' registered for caching
[ 0.171960] NFS: Registering the id_resolver key type
[ 0.171996] Key type id_resolver registered
[ 0.172002] Key type id_legacy registered
[ 0.173868] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.173991] io scheduler noop registered
[ 0.173998] io scheduler deadline registered (default)
[ 0.174270] io scheduler cfq registered
[ 0.174277] io scheduler mq-deadline registered
[ 0.174283] io scheduler kyber registered
[ 0.176503] BCM2708FB: allocated DMA memory f7900000
[ 0.176528] BCM2708FB: allocated DMA channel 0 @ b880d000
[ 0.187032] Console: switching to colour frame buffer device 90x30
[ 0.194177] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.194306] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.194733] vc-sm: Videocore shared memory driver
[ 0.194999] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.204512] brd: module loaded
[ 0.213139] loop: module loaded
[ 0.213152] Loading iSCSI transport class v2.0-870.
[ 0.213633] usbcore: registered new interface driver smsc95xx
[ 0.213648] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.441726] Core Release: 2.80a
[ 0.441735] Setting default values for core params
[ 0.441764] Finished setting default values for core params
[ 0.642003] Using Buffer DMA mode
[ 0.642009] Periodic Transfer Interrupt Enhancement - disabled
[ 0.642014] Multiprocessor Interrupt Enhancement - disabled
[ 0.642020] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.642032] Dedicated Tx FIFOs mode
[ 0.642413] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7914000 dma = 0xf7914000 len=9024
[ 0.642438] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.642445] dwc_otg: Microframe scheduler enabled
[ 0.642499] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805c68fc
[ 0.642510] WARN::hcd_init_fiq:460: FIQ ASM at 0x805c6c64 length 36
[ 0.642522] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb8878000
[ 0.642577] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.642609] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.642639] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[ 0.642685] Init: Port Power? op_state=1
[ 0.642690] Init: Power Port (0)
[ 0.642889] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.642899] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.642907] usb usb1: Product: DWC OTG Controller
[ 0.642915] usb usb1: Manufacturer: Linux 4.14.24-v7+ dwc_otg_hcd
[ 0.642924] usb usb1: SerialNumber: 3f980000.usb
[ 0.643509] hub 1-0:1.0: USB hub found
[ 0.643546] hub 1-0:1.0: 1 port detected
[ 0.644075] dwc_otg: FIQ enabled
[ 0.644080] dwc_otg: NAK holdoff enabled
[ 0.644085] dwc_otg: FIQ split-transaction FSM enabled
[ 0.644094] Module dwc_common_port init
[ 0.644318] usbcore: registered new interface driver usb-storage
[ 0.644484] mousedev: PS/2 mouse device common for all mice
[ 0.644554] IR NEC protocol handler initialized
[ 0.644559] IR RC5(x/sz) protocol handler initialized
[ 0.644564] IR RC6 protocol handler initialized
[ 0.644569] IR JVC protocol handler initialized
[ 0.644574] IR Sony protocol handler initialized
[ 0.644579] IR SANYO protocol handler initialized
[ 0.644584] IR Sharp protocol handler initialized
[ 0.644589] IR MCE Keyboard/mouse protocol handler initialized
[ 0.644594] IR XMP protocol handler initialized
[ 0.644840] bcm2835_thermal soc:thermal: invalid resource
[ 0.645013] bcm2835_thermal soc:thermal: Could not get registers: -22
[ 0.645205] bcm2835_thermal: probe of soc:thermal failed with error -22
[ 0.645593] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.645840] bcm2835-cpufreq: min=600000 max=1400000
[ 0.646193] sdhci: Secure Digital Host Controller Interface driver
[ 0.646198] sdhci: Copyright(c) Pierre Ossman
[ 0.646464] mmc-bcm2835 3f300000.mmc: /aliases ID not available
[ 0.646540] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[ 0.646816] sdhost-bcm2835 3f202000.sdhost: /aliases ID not available
[ 0.646874] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[ 0.646958] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.648356] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.648489] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.648634] usbcore: registered new interface driver usbhid
[ 0.648639] usbhid: USB HID core driver
[ 0.649225] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[ 0.650551] [vc_sm_connected_init]: start
[ 0.660203] [vc_sm_connected_init]: end - returning 0
[ 0.660745] Initializing XFRM netlink socket
[ 0.660767] NET: Registered protocol family 17
[ 0.660866] Key type dns_resolver registered
[ 0.661416] Registering SWP/SWPB emulation handler
[ 0.662025] registered taskstats version 1
[ 0.667777] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.667850] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[ 0.669330] mmc-bcm2835 3f300000.mmc: /aliases ID not available
[ 0.669474] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.669482] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.721795] sdhost-bcm2835 3f202000.sdhost: /aliases ID not available
[ 0.722135] sdhost: log_buf @ b7913000 (f7913000)
[ 0.757976] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.759550] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.761121] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.763925] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.801583] mmc1: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.802587] of_cfs_init
[ 0.802673] of_cfs_init: OK
[ 0.803173] Waiting for root device PARTUUID=ee397c53-02...
[ 0.849402] mmc0: new high speed SDIO card at address 0001
[ 0.861710] Indeed it is in host mode hprt0 = 00021501
[ 0.959769] mmc1: host does not support reading read-only switch, assuming write-enable
[ 0.963422] mmc1: new high speed SDHC card at address aaaa
[ 0.963898] mmcblk1: mmc1:aaaa SL08G 7.40 GiB
[ 0.965217] mmcblk1: p1 p2 p3
[ 1.001798] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.001846] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.009529] devtmpfs: mounted
[ 1.014066] Freeing unused kernel memory: 1024K
[ 1.071562] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.071685] Indeed it is in host mode hprt0 = 00001101
[ 1.311856] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 1.311871] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.312510] hub 1-1:1.0: USB hub found
[ 1.312585] hub 1-1:1.0: 4 ports detected
[ 1.516122] systemd[1]: System time before build time, advancing clock.
[ 1.631608] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.636080] NET: Registered protocol family 10
[ 1.637227] Segment Routing with IPv6
[ 1.646927] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.668961] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.669513] systemd[1]: Detected architecture arm.
[ 1.670471] systemd[1]: Set hostname to <Max2Play>.
[ 1.772015] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[ 1.772030] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.772633] hub 1-1.1:1.0: USB hub found
[ 1.772712] hub 1-1.1:1.0: 3 ports detected
[ 2.125826] dwc_otg_handle_wakeup_detected_intr lxstate = 2
[ 2.185275] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.186323] systemd[1]: Created slice User and Session Slice.
[ 2.186698] systemd[1]: Listening on Journal Socket.
[ 2.186947] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.187272] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.187545] systemd[1]: Listening on udev Control Socket.
[ 2.187752] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.601594] usb 1-1.1.1: new high-speed USB device number 4 using dwc_otg
[ 2.702414] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[ 2.732255] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
[ 2.732274] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.822462] systemd-journald[96]: Received request to flush runtime journal from PID 1
[ 3.385435] libphy: lan78xx-mdiobus: probed
[ 3.386421] usbcore: registered new interface driver lan78xx
[ 3.529374] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.537353] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[ 3.547365] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CPU DAI (null) not registered - will retry
[ 3.549344] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 3.661609] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 3.665257] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 3.677234] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
[ 3.678070] usbcore: registered new interface driver brcmfmac
[ 3.678380] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 3.712648] pcm512x 1-004d: Failed to reset device: -121
[ 3.713057] pcm512x: probe of 1-004d failed with error -121
[ 3.990465] random: crng init done
[ 3.997222] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 3.997855] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 9.10.105 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2018-03-09 18:56:28
[ 4.146409] brcmfmac: power management disabled
[ 5.207162] uart-pl011 3f201000.serial: no DMA platform data
[ 5.512591] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 5.963509] input: lircd-uinput as /devices/virtual/input/input0
[ 11.454649] Bluetooth: Core ver 2.22
[ 11.454705] NET: Registered protocol family 31
[ 11.454708] Bluetooth: HCI device and connection manager initialized
[ 11.454722] Bluetooth: HCI socket layer initialized
[ 11.454729] Bluetooth: L2CAP socket layer initialized
[ 11.454748] Bluetooth: SCO socket layer initialized
[ 11.463218] Bluetooth: HCI UART driver ver 2.3
[ 11.463227] Bluetooth: HCI UART protocol H4 registered
[ 11.463229] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 11.762086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.762098] Bluetooth: BNEP filters: protocol multicast
[ 11.762118] Bluetooth: BNEP socket layer initialized
[ 15.232910] fuse init (API version 7.26)`


`pi@Max2Play:~ $ sudo vcdbg log msg
001110.383: brfs: File read: /mfs/sd/config.txt
001111.298: brfs: File read: 1685 bytes
001120.907: HDMI:EDID error reading EDID block 0 attempt 0
001122.171: HDMI:EDID error reading EDID block 0 attempt 1
001123.428: HDMI:EDID error reading EDID block 0 attempt 2
001124.686: HDMI:EDID error reading EDID block 0 attempt 3
001125.943: HDMI:EDID error reading EDID block 0 attempt 4
001127.201: HDMI:EDID error reading EDID block 0 attempt 5
001128.458: HDMI:EDID error reading EDID block 0 attempt 6
001129.717: HDMI:EDID error reading EDID block 0 attempt 7
001130.974: HDMI:EDID error reading EDID block 0 attempt 8
001132.232: HDMI:EDID error reading EDID block 0 attempt 9
001133.253: HDMI:EDID giving up on reading EDID block 0
001147.298: brfs: File read: /mfs/sd/config.txt
001148.081: HDMI:Setting property pixel encoding to Default
001148.100: HDMI:Setting property pixel clock type to PAL
001148.120: HDMI:Setting property content type flag to No data
001148.138: HDMI:Setting property fuzzy format match to enabled
001356.933: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
001356.961: hdmi: HDMI:>>>>>>>>>>>>>Rx sensed, reading EDID<<<<<<<<<<<<<
001357.267: hdmi: HDMI:EDID error reading EDID block 0 attempt 0
001358.527: hdmi: HDMI:EDID error reading EDID block 0 attempt 1
001359.788: hdmi: HDMI:EDID error reading EDID block 0 attempt 2
001361.049: hdmi: HDMI:EDID error reading EDID block 0 attempt 3
001362.309: hdmi: HDMI:EDID error reading EDID block 0 attempt 4
001363.570: hdmi: HDMI:EDID error reading EDID block 0 attempt 5
001364.830: hdmi: HDMI:EDID error reading EDID block 0 attempt 6
001366.091: hdmi: HDMI:EDID error reading EDID block 0 attempt 7
001367.351: hdmi: HDMI:EDID error reading EDID block 0 attempt 8
001368.611: hdmi: HDMI:EDID error reading EDID block 0 attempt 9
001369.636: hdmi: HDMI:EDID giving up on reading EDID block 0
001369.667: hdmi: HDMI: No lookup table for resolution group 0
001369.685: hdmi: HDMI: hotplug attached with DVI support
001369.718: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
001370.011: hdmi: HDMI:EDID error reading EDID block 0 attempt 0
001371.274: hdmi: HDMI:EDID error reading EDID block 0 attempt 1
001372.537: hdmi: HDMI:EDID error reading EDID block 0 attempt 2
001373.800: hdmi: HDMI:EDID error reading EDID block 0 attempt 3
001375.063: hdmi: HDMI:EDID error reading EDID block 0 attempt 4
001376.326: hdmi: HDMI:EDID error reading EDID block 0 attempt 5
001377.589: hdmi: HDMI:EDID error reading EDID block 0 attempt 6
001378.852: hdmi: HDMI:EDID error reading EDID block 0 attempt 7
001380.115: hdmi: HDMI:EDID error reading EDID block 0 attempt 8
001381.378: hdmi: HDMI:EDID error reading EDID block 0 attempt 9
001382.404: hdmi: HDMI:EDID giving up on reading EDID block 0
001382.441: hdmi: HDMI: hotplug deassert
001382.454: hdmi: HDMI: HDMI is currently off
001382.467: hdmi: HDMI: changing mode to unplugged
001382.491: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
001383.664: *** Restart logging
001383.690: brfs: File read: 1685 bytes
001384.973: brfs: File read: /mfs/sd/cmdline.txt
001385.056: Read command line from file 'cmdline.txt'
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=ee397c53-02 rootfstype=ext4 elevator=deadline fsck.repair=yes net.ifnames=0 biosdevname=0 avoid_safe_mode=1 rootwait quiet
001385.324: brfs: File read: 193 bytes
001711.787: brfs: File read: /mfs/sd/kernel7.img
001711.812: Loading 'kernel7.img' to 0x8000 size 0x49a840
001715.447: No kernel trailer - assuming DT-capable
001715.486: Trying Device Tree file 'bcm2710-rpi-3-b-plus.dtb'
001715.511: brfs: File read: 4827200 bytes
001718.810: brfs: File read: /mfs/sd/bcm2710-rpi-3-b-plus.dtb
001718.835: Loading 'bcm2710-rpi-3-b-plus.dtb' to 0x4a2840 size 0x463c
001731.494: dtdebug: delete_node(/__local_fixups__)
001740.160: dtdebug: /aliases:i2c_vc=i2c0
001746.354: dtdebug: /__symbols__:i2c_vc=i2c0
001751.418: dtdebug: /__overrides__:i2c_vc=i2c0
001764.060: dtdebug: /__overrides__:i2c_vc_baudrate=i2c0_baudrate
001769.187: dtdebug: /aliases:i2c=i2c1
001775.549: dtdebug: /__symbols__:i2c=i2c1
001780.691: dtdebug: /__overrides__:i2c=i2c1
001785.848: dtdebug: /aliases:i2c_arm=i2c1
001792.259: dtdebug: /__symbols__:i2c_arm=i2c1
001797.441: dtdebug: /__overrides__:i2c_arm=i2c1
001810.300: dtdebug: /__overrides__:i2c_baudrate=i2c1_baudrate
001823.177: dtdebug: /__overrides__:i2c_arm_baudrate=i2c1_baudrate
001830.796: dtparam: uart0_clkrate=48000000
001834.392: dtdebug: /__overrides__ has no uart0_clkrate property
001834.405: Unknown dtparam 'uart0_clkrate' - ignored
001834.429: brfs: File read: 17980 bytes
001836.307: brfs: File read: /mfs/sd/config.txt
001836.897: dtparam: audio=on
001840.412: dtdebug: Found override audio
001840.447: dtdebug: override audio: string target 'status'
001849.180: brfs: File read: 1685 bytes
001852.696: dtdebug: Opened overlay file 'overlays/hifiberry-dacplus.dtbo'
001854.331: brfs: File read: /mfs/sd/overlays/hifiberry-dacplus.dtbo
001872.622: Loaded overlay 'hifiberry-dacplus'
001872.708: dtdebug: Found fragment 0 (offset 36)
001879.442: dtdebug: merge_fragment(/clocks,/fragment@0/__overlay__)
001884.532: dtdebug: merge_fragment(/clocks/dacpro_osc,/fragment@0/__overlay__/dacpro_osc)
001884.557: dtdebug: +prop(compatible)
001885.500: dtdebug: +prop(#clock-cells)
001886.507: dtdebug: +prop(phandle)
001887.506: dtdebug: merge_fragment() end
001887.534: dtdebug: merge_fragment() end
001887.608: dtdebug: Found fragment 1 (offset 184)
001891.149: dtdebug: merge_fragment(/soc/i2s@7e203000,/fragment@1/__overlay__)
001891.176: dtdebug: +prop(status)
001893.053: dtdebug: merge_fragment() end
001893.111: dtdebug: Found fragment 2 (offset 260)
001899.929: dtdebug: merge_fragment(/soc/i2c@7e804000,/fragment@2/__overlay__)
001899.955: dtdebug: +prop(#address-cells)
001901.480: dtdebug: +prop(#size-cells)
001903.014: dtdebug: +prop(status)
001908.539: dtdebug: merge_fragment(/soc/i2c@7e804000/pcm5122@4d,/fragment@2/__overlay__/pcm5122@4d)
001908.567: dtdebug: +prop(#sound-dai-cells)
001910.162: dtdebug: +prop(compatible)
001911.654: dtdebug: +prop(reg)
001913.183: dtdebug: +prop(clocks)
001914.755: dtdebug: +prop(AVDD-supply)
001916.733: dtdebug: +prop(DVDD-supply)
001918.722: dtdebug: +prop(CPVDD-supply)
001920.726: dtdebug: +prop(status)
001922.408: dtdebug: merge_fragment() end
001922.443: dtdebug: merge_fragment() end
001922.530: dtdebug: Found fragment 3 (offset 528)
001934.358: dtdebug: merge_fragment(/soc/sound,/fragment@3/__overlay__)
001934.384: dtdebug: +prop(compatible)
001935.418: dtdebug: +prop(i2s-controller)
001936.933: dtdebug: +prop(status)
001937.978: dtdebug: merge_fragment() end
001953.665: dtdebug: /aliases:serial0=uart1
001958.944: dtdebug: /aliases:serial1=uart0
001968.045: dtparam: uart1=off
001971.498: dtdebug: Found override uart1
001971.532: dtdebug: override uart1: string target 'status'
002897.166: dtparam: cam0-pwdn-ctrl=21
002900.914: dtdebug: /__overrides__ has no cam0-pwdn-ctrl property
002900.927: Unknown dtparam 'cam0-pwdn-ctrl' - ignored
002900.950: dtparam: cam0-pwdn=5
002904.695: dtdebug: /__overrides__ has no cam0-pwdn property
002904.708: Unknown dtparam 'cam0-pwdn' - ignored
002915.551: dtparam: cam0-led-ctrl=21
002919.303: dtdebug: /__overrides__ has no cam0-led-ctrl property
002919.317: Unknown dtparam 'cam0-led-ctrl' - ignored
002919.340: dtparam: cam0-led=6
002923.089: dtdebug: /__overrides__ has no cam0-led property
002923.101: Unknown dtparam 'cam0-led' - ignored
002923.146: dtparam: arm_freq=1400000000
002926.613: dtdebug: Found override arm_freq
002926.662: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4)
002938.083: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4)
002949.592: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4)
002961.167: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4)
002972.865: dtparam: core_freq=400000000
002976.596: dtdebug: /__overrides__ has no core_freq property
002976.609: Unknown dtparam 'core_freq' - ignored
002976.629: dtparam: cache_line_size=64
002980.082: dtdebug: Found override cache_line_size
002980.130: dtdebug: override cache_line_size: cell target cache-line-size @ offset 0 (size 4)
002998.338: dtdebug: delete_node(/hat)
003006.692: Device tree loaded to 0x2effb300 (size 0x4c0f)
003008.706: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
004116.688: vchiq_core: vchiq_init_state: slot_zero = 0xf7980000, is_master = 1
004121.834: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead

PS: Is it possible that my hifiberry dac+ is defective?

Thanks.

Thanks &#x1f642;

PS: Why with multiple edit, my subject was deleted?

 

4 comments

Please sign in to leave a comment.