0

Digi+ I/O with Pulseaudio shows analog input/output?

Hello,

i installed pulseaudio on your pre-configured Rapbian Lite image and it will show me some additional analog inputs and outputs...

is this correct?  alsa shows only the digital ports.

 

this is the out from the command  "pactl list cards":

 

Card #0
    Name: alsa_card.platform-soc_sound
    Driver: module-alsa-card.c
    Owner Module: 6
    Properties:
        alsa.card = "0"
        alsa.card_name = "snd_rpi_hifiberry_digi"
        alsa.long_card_name = "snd_rpi_hifiberry_digi"
        alsa.driver_name = "snd_soc_hifiberry_digi"
        device.bus_path = "platform-soc:sound"
        sysfs.path = "/devices/platform/soc/soc:sound/sound/card0"
        device.string = "0"
        device.description = "snd_rpi_hifiberry_digi"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card"
    Profiles:
        input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes)
        input:iec958-stereo: Digital Stereo (IEC958) Input (sinks: 0, sources: 1, priority: 55, available: yes)
        output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes)
        output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes)
        output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (sinks: 1, sources: 1, priority: 6055, available: yes)
        output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority: 5500, available: yes)
        output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority: 5560, available: yes)
        output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (sinks: 1, sources: 1, priority: 5555, available: yes)
        off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
    Active Profile: output:analog-stereo+input:analog-stereo
    Ports:
        analog-input: Analog Input (priority: 10000, latency offset: 0 usec)
            Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo
        iec958-stereo-input: Digital Input (S/PDIF) (priority: 0, latency offset: 0 usec)
            Part of profile(s): input:iec958-stereo, output:analog-stereo+input:iec958-stereo, output:iec958-stereo+input:iec958-stereo
        analog-output: Analog Output (priority: 9900, latency offset: 0 usec)
            Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo, output:analog-stereo+input:iec958-stereo
        iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec)
            Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo, output:iec958-stereo+input:iec958-stereo

 

 

1 comment

Please sign in to leave a comment.