Hi
I'm having trouble reprogramming the DSP from the BeoCreate website. Until today everything worked fine, although I have to reprogram the DSP on every reboot for the volume to be at a normal level.
It just hangs at "Programming the sound processor ..."
Regards
Is there a way to reprogram the DSP from the raspberry pi?
Hi Phillip,
this is possible, but a bit complicated on the Beocreate image. You need to download the profile from here:
http://downloads.hifiberry.com/beocreate/profiles/
Then run this as user root:
/usr/local/bin/beocreate-client 127.0.0.1 write_eeprom <filename>
Best regards,
Daniel
Hi Daniel
I don't have /usr/local/bin/beocreate-client
It is not located on my system?
Installed the system through pibakery and the setup tool You provided
So Tuomas suggestion in post https://support.hifiberry.com/hc/en-us/community/posts/360001662489-Need-to-reprogram-beocreate-amplifier-on-boot?page=1 helped. Everything works again :-)