0

GPIO cable for DIGI+

Hey!

I am going to build a case for my Pi3 and the Digi+ and now I am wondering if it is important that the Digi+ is plugged directly on the Pi3 or if i can use a cable to connect the GPIO port.  So something like that:

https://www.adafruit.com/product/1988

As the master clock for the digital signal is directly on the Digi+ board I hope that this should not be a problem, but I am note sure...

I hope someone can help me!

Greetings,

Philip

 

1 comment

Please sign in to leave a comment.