I have a DIGI+ with a RPI 2 and installed Musicbox on it. and want to connect it with the coax SPDIF interface to the Philips MX6000i Amp. which has a coax SPDIF input.
But have no sound .
When I Use my PC which has a SPDIF input I can play from the Musicbox so the installation and DIGI+ board is ok.
Other SPDIF sources , example sat receiver is working on the Philips MX6000i.
The MX6000i supports a max rate of 24bit/96Khz but think the DIGI+ wants to play on a higher rate than the MX6000i supports.
Is there a way to limit the digi+ or set his output to fixed 24bit/96Khz ?