Hi,
my RP2 and Digi+ (w/Transformer) doesn't boot with any kernel V4.1.17/18 I tried. Boot hangs already in the rainbow image. Images with older kernels (V3.18) and the same RP2 without the Digi+ run fine. Is the Digi+ no more supported in newer kernels?
SD card(s) and power supply (2A) have been exchanged and are Ok. Any ideas?
regards,
Ingo
Hi Ingo,
you might need to re-flash the EEPROM with an older kernel. Unfortunately we don't have an image available for re-flashing with an RPI2. You can still stay with 3.x and wait until we have something available or send the board to us to re-flash it.
Best regards,
Daniel
Hi Daniel,
if there is an image available for re-flashing with an A+/B+ I could look if anyone here has this type of RP. If not I would prefer to send you the Digi for a reflash of the EEPROM. I want to use it with the official Touchscreen which needs a newer kernel. What next?
regards,
Ingo