0

Amp + and Raspberry PI 3

Ab Hocine

April 21, 2016 13:49

None

Follow

Hello !

I saw in your site, Kodi (version 16)  doesnt work with the AMP +.

But this information was in 2014.

Do you have other information for Kodi and AMP + on PI3.

Sorry for my english !

Thanks

• Facebook
• Twitter
• LinkedIn

5 comments

• 0
  
  HiFiBerry team April 21, 2016 14:18

  The Amp+ works with the RPI3. OpenElec should be no problem, also OSMC should work fine.

  Best regards,
  Daniel

• 0
  
  Benjamin McCartney October 12, 2016 03:48

  Hi Daniel,

  When using the installer an error message stating RPi3 is not available. Is that just outdated? I used the installer (with RPi2B+) and can't get past whatever the rainbow screen is called... also, in case it isn't evident by what I just said - I'm a baby with this stuff and am slowly making my way through.

  Thanks!

• 0
  
  HiFiBerry team October 12, 2016 05:17

  The OpenElec version in the installer does not support the Rasperry Pi 3. As OpenElec development is almost completely stopped, I recommend installing LibreElec. This isn't included in the installer, but you can install it by yourself and configure the Amp+ as documented here:

  https://support.hifiberry.com/hc/en-us/articles/205311302-Configuring-OpenElec-with-device-tree-overlays

  
  Best regards,
  Daniel

• 0
  
  Benjamin McCartney October 12, 2016 05:19

  Thanks Daniel. I selected OSMC - does that still apply?

• 0
  
  HiFiBerry team October 12, 2016 05:38

  Ah sorry, I did not see this. The OSMC version in the installer is also a bit outdated. You should download OSMC from their website. You need to configure the Amp using the OSMC configuration menu.

  Best regards,
  Daniel