0

Raspberry pi3 + Hifiberry Digi+ + Ambilight

 Hello there,
so i got my new Raspberry PI 3.
Everything works totally fine as expected when i moved my SD card with openelec to the new PI.

I have an IR Receiver, the Hifiberry Digi+ and a Ambilight in my setup.

Everything works totally fine when i am Using my PI2.
But with the new PI 3 i can either have the Ambilight or the Hifiberry activated.

Thats very frustrating, as the exact same setup and config file works totally fine with my other PI2.

I Hope somone can help.

Here is a bit of my Config.txt 

"

# Ambilight Modul aktivieren
dtparam=spi=on

#IR Receiver
dtoverlay=lirc-rpi
dtparam=gpio_in_pin=5

#Hifi Berry Digi+
dtoverlay=pi3-disable-bt
dtoverlay=hifiberry-digi

#USB Maximaler Strom
max_usb_current=1

# over_voltage_sdram=0
hdmi_drive=2
hdmi_force_edid_audio=0
hdmi_pixel_encoding=0
hdmi_ignore_hotplug=0
hdmi_edid_file=1
config_hdmi_boost=0
sdtv_mode=0
sdtv_aspect=1
hdmi_ignore_cec=1
disable_splash=0

"

 

 

EDIT:

It seems that i found a fix for it :)
Apperently its an issue with the new Wifi and Blootooth feature (as suspected)
So i used THIS edited files and it works flawless so far.

mount -o remount,rw /flash
curl http://www.horus.com/~hias/tmp/openelec-wolfson/fixes/6.0.3/bcm2710-rpi-3-b.dtb -o /flash/bcm2710-rpi-3-b.dtb

0 comments

Please sign in to leave a comment.