I am stuck setting up a new beocrate 2.x board. The following issues happen with different Pis
- Pi5 running HiFiBerryOS 64
- Pi3b running HiFiBerryOS for Raspberry Pi3
Both Pis were reinstalled multiple times.
Trying to save the following results in an error along the line "Programm was successfully written, but didn't persist in memory"
- Speaker Preset
- DSP Programm (Universal 10 or 11)
- Sound Adjustment
The DSP Programs screen warns: "There is a problem accessing the sound processor (not responding)".
As suggested in other threads, I logged on via SSH and ran "dsptoolkit get-checksum" which did not output anything.
Can anyone help?
Additional shell output
# dsptoolkit get-checksum
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_dac], device 0: HifiBerry DAC HiFi pcm5102a-hifi-0 [HifiBerry DAC HiFi pcm5102a-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
# amixer
Simple mixer control 'DSPVolume',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 255
Front Left: 255 [100%]
Front Right: 255 [100%]
Simple mixer control 'Softvol',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 255
Front Left: 119 [47%]
Front Right: 119 [47%]
System Info
HiFiBerryOS version 20230404
Pi type 3B
Pi model Raspberry Pi 3 Model B Rev 1.2
Compatibility No known problems
Sound card Beocreate 4-Channel Amplifier
Sound card ID 0
aplay 1 card 0 sndrpihifiberry [snd_rpi_hifiberry_dac]
aplay 2 device 0 HifiBerry DAC HiFi pcm5102a-hifi-0 [HifiBerry DAC HiFi pcm5102a-hifi-0]
Mixer Softvol
Features pi localui pi3orlater arm7 dsp toslink
Power controller not detected
Linux version 5.15.78-v7