Hello,
received my new RP2 and the hifiberry amp+ yesterday, but even with the testimage there is no sound.
PS is a Meanwell 12v 5A.
one message is:
snd-rpi-hifiberry-dacplus snd-rpi-hifiberry-dacplus.0: snd_soc_register_card() failed: -517
sound cards:
*** LIST of Play...
card 0: sndrphifiberry [snd_rpi_hifiberry_dacl], device 0: HifiBerry DAC HiFI pcm5103a-hifi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
.
.
.
/usr/bin/play WARN alsa: can't encode 0-bit Unknown or not applicable
ENCODING: n/a
Channels: 1 @ 32-bit
Samplerate:
.
.
Then seems to play, but no sound.
BTW, should there be any lights on the amp+?
Thanks, Robert
Date
Votes
1 comment
-
HiFiBerry team Hi,
the test image has a bug and doesn't works with the Amp. However our image with auto-detection should work with the Amp:
https://www.hifiberry.com/2015/04/raspbian-image-with-hifiberry-auto-detection/
Check this out. It should reboot 2 times as auto-detection needs to change the configuration.
There are no lights on the Amp.
Best regards
Daniel
Please sign in to leave a comment.