0

card not detected on 3.18.11 on rpi2

hi I run an rpi-update on an rpi2 and then add the following lines to
/etc/modules
snd_soc_bcm2708_i2s
bcm2708_dmaengine
snd_soc_pcm5102a
snd_soc_hifiberry_dac

I don't see the devicce listed under aplay -l so
I follow the instructions and;
wget www.hifiberry.com/files/dac/check-system
mv check-system check-system.dac
chmod u+rx ./check-system.dac
./check-system.dac

and I see the message;
module file /lib/modules/3.18.11-v7+/kernel/drivers/dma/bcm2708-dmaengine.ko not found
but the sine wave does play.

I saw the same behavior before I ran rpi-update using;
module file /lib/modules/3.18.10-v7+/kernel/drivers/dma/bcm2708-dmaengine.ko not found

I'm running raspbian; a uname -a gives;
Linux raspberrypi 3.18.11-v7+ #780 SMP PREEMPT Mon Apr 20 14:59:10 BST 2015 armv7l GNU/Linux


Also I has an rs electronics case - I've spend the last 4 hours cutting and trimming the case up just to get the mmini jack dac card installed.
Ironically I ordered the mini jack version supposedly supposedly to make the install trivial.
what are my options for case fdore therpi2 and mini jack dac card?

16 comments

Please sign in to leave a comment.