Is the GS90A19-P1M 19.0V @ 4.74A too much for the AMP+ and Raspberry PI 2 ??
This unit has more wattage then the 60W but pushes at 19Volts. The RPI2 quad core CPU has to take more power, right?
The other option I have is a 33 Amp/hour 12V SLA (sealed lead acid) with a 2amp battery tender. Do the boards run better with the higher voltage DC P/S? The SLA battery will have a 12-14.4 voltabe range which may not be desireable.
Date
Votes
1 comment
-
HiFiBerry team Hi Chris,
I would recommend the 12V. 19V might work but depending on the load of the Raspberry Pi you might need active cooling.
12-14.4V works very well. I have one running here on a 12V battery.
Best regards
Daniel
Please sign in to leave a comment.