0

Possible to build a 2.1 setup with hifiberry amp

ab

November 07, 2014 19:51

None

Follow

the hifiberry amp has 2x25W what i also need is an (passive) subwoofer out to build a 2.1 system on a raspberry.
Do you see any possibilities to build an 2.1 system with hifiberry components?

Thanks for your advices
Andi

• Facebook
• Twitter
• LinkedIn

4 comments

• 0
  
  HiFiBerry team November 08, 2014 07:55

  Hi Andy,
  
  unfortunately there is no configuration for this with our current amp. If you want to use a subwoofer, I recommend something that is a bit more powerful than the HiFiBerry Amp.
  
  Best regards
  Daniel
• 0
  
  ab November 08, 2014 09:04

  Thank you Daniel
  
  The Hifiberry amp is "only" fpr the (2) two speakers. What i need is a Subwoofer (line) out from raspberyy or bhifiberry for an activ subwoofer - > like the http://www.monacor.de/de/FLE/SAM100D_200D.pdf
  
• 0
  
  HiFiBerry team November 08, 2014 15:10

  Hi,
  
  there is no subwoofer out available on the Amp. Therefore you can't use it with this subwoofer amplifier. Some subwoofers can use the loudspeaker signal and use this as an input. This might be an option.
  An example for this is the Mivoc AM80.
  
  Best regards
  Daniel
• 0
  
  ab November 08, 2014 19:51

  Yes Daniel. I think this is a way to go. But im looking also around to find a possibility to get on more lineout out of the raspi :)
  Thank for your time