0

On and off

roppeltralf

February 25, 2015 06:46

None

Follow

Hello friends of good sound.
I would like to use to turn on and off the Pi this board. https://www.yepkit.com/learn/hookup-guide-ykrud
Unfortunately, this requires two GPIOs free. Which pins can I tap into? Which does not matter. And who knows how to do this most easily with a mounted DAC on top of it?

• Facebook
• Twitter
• LinkedIn

2 comments

• 0
  
  Chris Mullen February 25, 2015 11:57

  Just use GPIO pins not used by the DAC. I do in my setup.
  
  I believe pins >20# are available but this is available on this website, as to what pins are free.
• 0
  
  HiFiBerry team February 25, 2015 11:59

  The GPIOs that are used by our products are documented here:
  https://www.hifiberry.com/guides/gpio-usage-of-the-hifiberry-products/
  
  Note that the GPIO numer is NOT the pin number!
  
  Best regards
  Daniel