0

raspberry pi rev B+

Erez Siag

July 14, 2014 11:57

None

Follow

Hi!
Are you going to make a version compatible with the new B+ revision?
This will require a change in the gpio physical connection, if I understand correctly?
Thanks,
Erez

• Facebook
• Twitter
• LinkedIn

8 comments

• 0
  
  HiFiBerry team July 14, 2014 21:02

  Yes, it will need a new version. Yes, we will develop it.
  
  Best regards
  Daniel
• 0
  
  Christi Scarborough July 15, 2014 20:09

  Until that's ready, would it be possible to know the pin assignments to make a break out cable connecting the HiFiBerry to the B+? Thanks.
• 0
  
  HiFiBerry team July 16, 2014 05:02

  This won't work as the driver also has to be changed.
  
  Best regards
  Daniel
• 0
  
  Jean Harrault July 19, 2014 17:32

  
  Hello Daniel,
  
  Do you have an idea when this new board/drivers will be released?
  
  Thanks!
• 0
  
  HiFiBerry team July 19, 2014 20:38

  I hope it will be soon. The first test prototype should be ready next week. Production will take some time. I hope we will have them ready in the first half of August.
  
  Best regards
  Daniel
• 0
  
  cbayly July 24, 2014 17:59

  Quick question, from what I've read during the announcement about the B+ boards, the first 26 GPIO pins have an identical layout. What causes the incompatibility between the B and the B+ for the Digi & DAC boards?
• 0
  
  HiFiBerry team July 24, 2014 19:07

  The Digi and DAC boards use the P5 connector that does not exist anymore on the B+ port.
  
  Best regards
  Daniel
• 0
  
  cbayly July 25, 2014 06:43

  OH, of course, that makes sense then! Good luck with the respin on the board (at least it's just having the pins moved and not having them go awol, etc)!