0

snd-hifiberry-digi failed to instantiate card

Hi,

I've installed my recently received Digi on a new Raspberry Pi and installed Volumio Beta 1.2

P5 header is installed OK and I have a green light on the Digi.

However, the module does not appear to be found. dmesg shows the following:

[    4.867664] bcm2708_i2c_init_pinmode(0,0)
[ 4.958955] bcm2708_i2c_init_pinmode(0,1)
[ 4.964894] bcm2708_i2c bcm2708_i2c.0: BSC0 Controller at 0x20205000 (irq 79) (baudrate 100000)
[ 5.291867] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[ 5.369547] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[ 5.369714] bcm2708_i2c_init_pinmode(1,2)
[ 5.369719] bcm2708_i2c_init_pinmode(1,3)
[ 5.370336] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[ 6.053375] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
[ 6.702956] pcm512x 1-004c: Failed to reset device: -5
[ 6.714485] pcm512x: probe of 1-004c failed with error -5
[ 10.540939] wm8804 1-003b: Invalid device ID: 0x8811
[ 10.547436] wm8804 1-003b: ASoC: failed to probe CODEC -22
[ 10.554512] snd-hifiberry-digi snd-hifiberry-digi.0: ASoC: failed to instantiate card -22
[ 10.565725] snd-hifiberry-digi snd-hifiberry-digi.0: snd_soc_register_card() failed: -22
[ 10.577020] snd-hifiberry-digi: probe of snd-hifiberry-digi.0 failed with error -22


My /etc/modules file contains:


pi@volumio:~$ cat /etc/modules
# snd-bcm2835
# snd_soc_bcm2708
snd_soc_bcm2708_i2s
bcm2708_dmaengine
snd_soc_pcm5102a
snd_soc_hifiberry_digi
snd-bcm2835




and aplay shows:
pi@volumio:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
pi@volumio:~$



There is no output on either the coax or optical connector and the optical LED is not illuminated.

Any help will be much appreciated.

Thanks!

2 comments

Please sign in to leave a comment.