Hello...
my setup:
Pi 4B 8GB rev 1.5
Hifiberry DAC2 HD with DSP add-on
Raspian 64bit Bullseye
ALSA k6.1.21-v8+
my problem: after failing to setup with Raspian 64bit (bookworm) there is also no sound output on the DAC2HD with Raspian 64bit (bullseye)
--------------------------------------------------
uname -a
Linux hifiberrypi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux
--------------------------------------------------
i2cdetect -l
i2c-20 i2c fef04500.i2c I2C adapter
i2c-1 i2c bcm2835 (i2c@7e804000) I2C adapter
i2c-21 i2c fef09500.i2c I2C adapter
--------------------------------------------------
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_dacplushd], device 0: HiFiBerry DAC+ HD HiFi pcm179x-hifi-0 [HiFiBerry DAC+ HD HiFi pcm179x-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
--------------------------------------------------
pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "14.2"
Module #1
Name: module-stream-restore
Argument: restore_device=false
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "14.2"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "14.2"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "14.2"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "14.2"
Module #5
Name: module-udev-detect
Argument: tsched=0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "14.2"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="platform-soc_sound" card_name="alsa_card.platform-soc_sound" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "14.2"
Module #7
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "14.2"
Module #8
Name: module-bluetooth-discover
Argument: autodetect_mtu=yes
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "14.2"
Module #9
Name: module-bluez5-discover
Argument: autodetect_mtu=yes
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "14.2"
Module #10
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "14.2"
Module #11
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "14.2"
Module #12
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded even if it's a null one"
module.version = "14.2"
Module #13
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "14.2"
Module #14
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "14.2"
Module #15
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "14.2"
Module #16
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "14.2"
Module #17
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "14.2"
Module #18
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "14.2"
Module #19
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "14.2"
Sink #0
State: SUSPENDED
Name: alsa_output.platform-soc_sound.stereo-fallback
Description: Built-in Audio Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 51760 / 79% / -6.15 dB, front-right: 51760 / 79% / -6.15 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.platform-soc_sound.stereo-fallback.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HiFiBerry DAC+ HD HiFi pcm179x-hifi-0"
alsa.id = "HiFiBerry DAC+ HD HiFi pcm179x-hifi-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "snd_rpi_hifiberry_dacplushd"
alsa.long_card_name = "snd_rpi_hifiberry_dacplushd"
alsa.driver_name = "snd_soc_hifiberry_dacplushd"
device.bus_path = "platform-soc:sound"
sysfs.path = "/devices/platform/soc/soc:sound/sound/card0"
device.form_factor = "internal"
device.string = "hw:0"
device.buffering.buffer_size = "10576"
device.buffering.fragment_size = "2644"
device.access_mode = "mmap"
device.profile.name = "stereo-fallback"
device.profile.description = "Stereo"
device.description = "Built-in Audio Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Ports:
analog-output: Analog Output (type: Analog, priority: 9900, availability unknown)
Active Port: analog-output
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.platform-soc_sound.stereo-fallback.monitor
Description: Monitor of Built-in Audio Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.platform-soc_sound.stereo-fallback
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Stereo"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "snd_rpi_hifiberry_dacplushd"
alsa.long_card_name = "snd_rpi_hifiberry_dacplushd"
alsa.driver_name = "snd_soc_hifiberry_dacplushd"
device.bus_path = "platform-soc:sound"
sysfs.path = "/devices/platform/soc/soc:sound/sound/card0"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 15
Properties:
application.name = "Login Session 1"
systemd-login.session = "1"
Client #1
Driver: module-systemd-login.c
Owner Module: 15
Properties:
application.name = "Login Session 10"
systemd-login.session = "10"
Client #3
Driver: protocol-native.c
Owner Module: 10
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "34"
application.process.id = "1277"
application.process.user = "admin"
application.process.host = "hifiberrypi"
application.process.binary = "pactl"
application.language = "en_GB.UTF-8"
application.process.machine_id = "2f40c20f77794dd7b0c49c4d36930874"
application.process.session_id = "10"
Card #0
Name: alsa_card.platform-soc_sound
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "snd_rpi_hifiberry_dacplushd"
alsa.long_card_name = "snd_rpi_hifiberry_dacplushd"
alsa.driver_name = "snd_soc_hifiberry_dacplushd"
device.bus_path = "platform-soc:sound"
sysfs.path = "/devices/platform/soc/soc:sound/sound/card0"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
Profiles:
output:stereo-fallback: Stereo Output (sinks: 1, sources: 0, priority: 5100, available: yes)
output:multichannel-output: Multichannel Output (sinks: 1, sources: 0, priority: 100, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:stereo-fallback
Ports:
analog-output: Analog Output (type: Analog, priority: 9900, latency offset: 0 usec, availability unknown)
Part of profile(s): output:stereo-fallback
--------------------------------------------------
cat /boot/config.txt
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
# Uncomment this to enable infrared communication.
#dtoverlay=gpio-ir,gpio_pin=17
#dtoverlay=gpio-ir-tx,gpio_pin=18
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
#dtparam=audio=on
# Automatically load overlays for detected cameras
camera_auto_detect=1
# Automatically load overlays for detected DSI displays
display_auto_detect=1
# Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d,noaudio
max_framebuffers=2
# Run in 64-bit mode
arm_64bit=1
# Disable compensation for displays with overscan
disable_overscan=1
[cm4]
# Enable host mode on the 2711 built-in XHCI USB controller.
# This line should be removed if the legacy DWC2 controller is required
# (e.g. for USB device mode) or if USB support is not required.
otg_mode=1
[pi4]
# Run as fast as firmware / board allows
arm_boost=1
[all]
dtoverlay=hifiberry-dacplushd
force_eeprom_read=0
