1

room correction for miniamp?

Sven Klaiber

May 07, 2024 20:27

None

Follow

I have a raspberry pi zero 2w with a hifiberry mimiamp. I installed hifiberry os 64. I connected 2 speakers to it. They ended up sounding quite tinny. So I wanted to add an equaliser and stumbled upon your room correction. Is this even supported with the miniamp? This would be quite important to me. Are there good alternatives from you?

• Facebook
• Twitter
• LinkedIn

3 comments

• 0
  
  HiFiBerry team May 08, 2024 05:23

  No, this isn't supported. Room correction requires a DSP module. This is only compatible with the Amp4.

• 0
  
  Sven Klaiber May 08, 2024 06:24

  Thank you for your quick response. Can I drive this amp with a raspberry pi zero 2w? How long does it usually take for your microphone to be back in stock?

• 0
  
  HiFiBerry team May 08, 2024 06:29

  While theoretically you could do this, we don't recommend it at all. There is no good way to fix the Amp on a Pi Zero physically. You should use a full-size Pi for this.
  
  We don't know if and when the HiFiBerry measurement microphone will be back in stock. However, there are alternative USB mics available. Have a look here:
  https://www.hifiberry.com/blog/measurement-microphones/