Hello,
I've been looking for the 3D model of the board HifiBerry DAC+ADC PRO, only after downloading the .step file from the datasheet page of dac+adc pro (https://www.hifiberry.com/docs/data-sheets/datasheet-dac-adc-pro/) , it looks like it's the model of the dac+adc version and not the pro one. Is there anywhere I can get the pro board 3D model ?
Thank you,
The 3D files are just there to design cases. As the connectors of the DAC+ ADC and DAC+ ADC Pro use exactly the same position for the connectors, there is only one model for both (and the DAC2 ADC Pro)
The external connectors have indeed the same position but not the internal headers (P5, J4, J1..). If there is no 3D model of the dac+adc pro is there a way to have the measured positions of those connectors ? For mechanical design purposes
I'm sorry, but there is no such model. We also do not guarantee the position of these headers. These can just change in future board revisions without further notice.
If you want to design an add-on board just for you, I recommend to just measure these on the board. For OEMs designing products based on our cards in larger quantities, we recommend the DAC+ ADC Stage.