Hello
Ive just taken delivery of a DAC2 HD board from one of your Australian resellers.
Ive mounted the board on a Raspberry Pi5 that has active cooling and used a GPIO riser to create some space between the boards. I am powering the setup with an official Raspberry Pi 4 power supply, since the new Pi5 ones are not obtainable in Australia as yet
I have enabled the overlay per your instructions:
[all]
dtoverlay=hifiberry-dacplushd
Then rebooted. The board is not detected, and sudo aplay -l does not show the hifiberry dac as an output.
stephencooper@five ~> sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: vc4hdmi0 [vc4-hdmi-0], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: vc4hdmi1 [vc4-hdmi-1], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
stephencooper@five ~>
I have tried with, and without the i2s interface enabled.
When i2s is enabled I get as follows in dmesg:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.1.0-rpi6-rpi-2712 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.1.58-1+rpt2 (2023-10-27)
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000018000000, size 320 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003f7fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 14 pages/cpu s177448 r8192 d43736 u229376
[ 0.000000] pcpu-alloc: s177448 r8192 d43736 u229376 alloc=14*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:AC:20:14 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=76910e3e-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=AU
[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 7, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] Memory: 3790512K/4186112K available (12416K kernel code, 2184K rwdata, 4208K rodata, 4416K init, 1216K bss, 67920K reserved, 327680K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 40065 entries in 40 pages
[ 0.000000] ftrace: allocated 40 pages with 2 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000157] Console: colour dummy device 80x25
[ 0.000178] printk: console [tty1] enabled
[ 0.000194] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000200] pid_max: default: 32768 minimum: 301
[ 0.000224] LSM: Security Framework initializing
[ 0.000282] Mount-cache hash table entries: 8192 (order: 2, 65536 bytes, linear)
[ 0.000298] Mountpoint-cache hash table entries: 8192 (order: 2, 65536 bytes, linear)
[ 0.000715] cgroup: Disabling memory control group subsystem
[ 0.001228] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001232] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001277] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001280] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001316] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.001318] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.001408] rcu: Hierarchical SRCU implementation.
[ 0.001411] rcu: Max phase no-delay instances is 1000.
[ 0.002026] EFI services will not be available.
[ 0.002138] smp: Bringing up secondary CPUs ...
[ 0.002376] Detected PIPT I-cache on CPU1
[ 0.002421] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.002687] Detected PIPT I-cache on CPU2
[ 0.002723] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.002986] Detected PIPT I-cache on CPU3
[ 0.003020] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.003059] smp: Brought up 1 node, 4 CPUs
[ 0.003064] SMP: Total of 4 processors activated.
[ 0.003068] CPU features: detected: 32-bit EL0 Support
[ 0.003071] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.003074] CPU features: detected: Common not Private translations
[ 0.003076] CPU features: detected: CRC32 instructions
[ 0.003079] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.003082] CPU features: detected: LSE atomic instructions
[ 0.003084] CPU features: detected: Privileged Access Never
[ 0.003086] CPU features: detected: RAS Extension Support
[ 0.003090] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.003132] CPU: All CPU(s) started at EL2
[ 0.003134] alternatives: applying system-wide alternatives
[ 0.005183] devtmpfs: initialized
[ 0.008209] Enabled cp15_barrier support
[ 0.008216] Enabled setend support
[ 0.008286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008294] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
[ 0.009131] pinctrl core: initialized pinctrl subsystem
[ 0.009347] DMI not present or invalid.
[ 0.009528] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.010952] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.011008] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.011111] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.011139] audit: initializing netlink subsys (disabled)
[ 0.011204] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.011358] thermal_sys: Registered thermal governor 'step_wise'
[ 0.011378] cpuidle: using governor menu
[ 0.011458] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.011503] ASID allocator initialised with 32768 entries
[ 0.011793] Serial: AMBA PL011 UART driver
[ 0.013928] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.014755] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[ 0.024946] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-10-30T16:45:10, variant start_cd
[ 0.028948] raspberrypi-firmware soc:firmware: Firmware hash is 30de0ba500000000000000000000000000000000
[ 0.038506] KASLR enabled
[ 0.048030] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 0.049291] iommu: Default domain type: Translated
[ 0.049295] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.049399] SCSI subsystem initialized
[ 0.049455] usbcore: registered new interface driver usbfs
[ 0.049467] usbcore: registered new interface driver hub
[ 0.049479] usbcore: registered new device driver usb
[ 0.049600] usb_phy_generic phy: supply vcc not found, using dummy regulator
[ 0.049702] pps_core: LinuxPPS API ver. 1 registered
[ 0.049705] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.049711] PTP clock support registered
[ 0.049970] vgaarb: loaded
[ 0.050117] clocksource: Switched to clocksource arch_sys_counter
[ 0.050287] VFS: Disk quotas dquot_6.6.0
[ 0.050306] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 0.050350] FS-Cache: Loaded
[ 0.050384] CacheFiles: Loaded
[ 0.052401] NET: Registered PF_INET protocol family
[ 0.052517] IP idents hash table entries: 65536 (order: 5, 524288 bytes, linear)
[ 0.053848] tcp_listen_portaddr_hash hash table entries: 2048 (order: 1, 32768 bytes, linear)
[ 0.053872] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
[ 0.053878] TCP established hash table entries: 32768 (order: 4, 262144 bytes, linear)
[ 0.054015] TCP bind hash table entries: 32768 (order: 6, 1048576 bytes, linear)
[ 0.054826] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.054953] MPTCP token hash table entries: 4096 (order: 2, 98304 bytes, linear)
[ 0.055005] UDP hash table entries: 2048 (order: 2, 65536 bytes, linear)
[ 0.055057] UDP-Lite hash table entries: 2048 (order: 2, 65536 bytes, linear)
[ 0.055167] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.055335] RPC: Registered named UNIX socket transport module.
[ 0.055339] RPC: Registered udp transport module.
[ 0.055341] RPC: Registered tcp transport module.
[ 0.055343] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.055349] PCI: CLS 0 bytes, default 64
[ 0.055531] Trying to unpack rootfs image as initramfs...
[ 0.055923] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[ 0.056092] kvm [1]: IPA Size Limit: 40 bits
[ 0.056105] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[ 0.056165] kvm [1]: vgic interrupt IRQ9
[ 0.056226] kvm [1]: VHE mode initialized successfully
[ 0.309485] Freeing initrd memory: 16704K
[ 0.350071] Initialise system trusted keyrings
[ 0.350233] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.352179] zbud: loaded
[ 0.352787] NFS: Registering the id_resolver key type
[ 0.352797] Key type id_resolver registered
[ 0.352799] Key type id_legacy registered
[ 0.352822] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.352826] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.352901] F2FS not supported on PAGE_SIZE(16384) != 4096
[ 0.352996] Key type asymmetric registered
[ 0.353000] Asymmetric key parser 'x509' registered
[ 0.353022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.353075] io scheduler mq-deadline registered
[ 0.353080] io scheduler kyber registered
[ 0.353781] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 31)
[ 0.353948] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 32)
[ 0.354085] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 33)
[ 0.354232] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 34)
[ 0.354368] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 35)
[ 0.354503] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 36)
[ 0.356426] gpio-461 (RP1 RUN pin): hogged as output/high
[ 0.357297] simple-framebuffer 3f800000.framebuffer: framebuffer at 0x3f800000, 0x3f4800 bytes
[ 0.357301] simple-framebuffer 3f800000.framebuffer: format=r5g6b5, mode=1920x1080x16, linelength=3840
[ 0.357452] Console: switching to colour frame buffer device 240x67
[ 0.358981] simple-framebuffer 3f800000.framebuffer: fb0: simplefb registered!
[ 0.392601] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.393274] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 38, base_baud = 6000000) is a 16550A
[ 0.393326] serial serial0: tty port ttyS0 registered
[ 0.393964] iproc-rng200 107d208000.rng: hwrng registered
[ 0.394132] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 0.394999] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 0.397316] brd: module loaded
[ 0.399112] loop: module loaded
[ 0.399369] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.399577] Loading iSCSI transport class v2.0-870.
[ 0.400793] usbcore: registered new interface driver r8152
[ 0.400807] usbcore: registered new interface driver lan78xx
[ 0.400819] usbcore: registered new interface driver smsc95xx
[ 0.400982] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.401075] dwc_otg: FIQ enabled
[ 0.401078] dwc_otg: NAK holdoff enabled
[ 0.401080] dwc_otg: FIQ split-transaction FSM enabled
[ 0.401085] Module dwc_common_port init
[ 0.401394] usbcore: registered new interface driver uas
[ 0.401407] usbcore: registered new interface driver usb-storage
[ 0.401643] mousedev: PS/2 mouse device common for all mice
[ 0.409520] rpi-rtc soc:rpi_rtc: registered as rtc0
[ 0.410984] rpi-rtc soc:rpi_rtc: setting system clock to 2023-11-21T05:17:00 UTC (1700543820)
[ 0.411798] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 0.411802] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.414773] sdhci: Secure Digital Host Controller Interface driver
[ 0.414776] sdhci: Copyright(c) Pierre Ossman
[ 0.414964] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.415470] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.415512] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.415525] hid: raw HID events driver (C) Jiri Kosina
[ 0.415553] usbcore: registered new interface driver usbhid
[ 0.415556] usbhid: USB HID core driver
[ 0.415770] NET: Registered PF_PACKET protocol family
[ 0.415803] Key type dns_resolver registered
[ 0.416104] registered taskstats version 1
[ 0.416129] Loading compiled-in X.509 certificates
[ 0.422710] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.422738] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 0.422931] Key type .fscrypt registered
[ 0.422934] Key type fscrypt-provisioning registered
[ 0.425120] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[ 0.425130] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
[ 0.425161] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 0.425175] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 0.425204] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 0.425218] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.426426] brcm-pcie 1000120000.pcie: setting SCB_ACCESS_EN, READ_UR_MODE, MAX_BURST_SIZE
[ 0.426437] brcm-pcie 1000120000.pcie: Forcing gen 2
[ 0.426491] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00
[ 0.426495] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.426499] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.426504] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.426523] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[ 0.426592] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.427608] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.534122] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 0.534152] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000
[ 0.534172] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[ 0.534182] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[ 0.534192] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[ 0.534290] pci 0000:01:00.0: supports D1
[ 0.534293] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.546134] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.546147] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[ 0.546154] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[ 0.546160] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[ 0.546167] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[ 0.546174] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.546179] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
[ 0.546189] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 0.546201] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 0.546350] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 0.546415] pcieport 0000:00:00.0: PME: Signaling with IRQ 39
[ 0.546502] pcieport 0000:00:00.0: AER: enabled with IRQ 39
[ 0.546687] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 0.546692] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 0.546704] rp1 0000:01:00.0: enabling device (0000 -> 0002)
[ 0.547929] rp1 0000:01:00.0: chip_id 0x20001927
[ 0.574192] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (d8:3a:dd:ac:20:14)
[ 0.575056] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 0.575694] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.575702] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 0.576164] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810
[ 0.576182] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000
[ 0.576275] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.576280] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 0.576285] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 0.576388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.576393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.576396] usb usb1: Product: xHCI Host Controller
[ 0.576399] usb usb1: Manufacturer: Linux 6.1.0-rpi6-rpi-2712 xhci-hcd
[ 0.576402] usb usb1: SerialNumber: xhci-hcd.0
[ 0.576580] hub 1-0:1.0: USB hub found
[ 0.576598] hub 1-0:1.0: 2 ports detected
[ 0.576845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.576849] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.576853] usb usb2: Product: xHCI Host Controller
[ 0.576856] usb usb2: Manufacturer: Linux 6.1.0-rpi6-rpi-2712 xhci-hcd
[ 0.576858] usb usb2: SerialNumber: xhci-hcd.0
[ 0.576993] hub 2-0:1.0: USB hub found
[ 0.577009] hub 2-0:1.0: 1 port detected
[ 0.577694] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.577701] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 0.578169] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000000000010810
[ 0.578188] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000
[ 0.578287] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.578291] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 0.578296] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 0.578367] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 0.578371] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.578375] usb usb3: Product: xHCI Host Controller
[ 0.578378] usb usb3: Manufacturer: Linux 6.1.0-rpi6-rpi-2712 xhci-hcd
[ 0.578381] usb usb3: SerialNumber: xhci-hcd.1
[ 0.578514] hub 3-0:1.0: USB hub found
[ 0.578532] hub 3-0:1.0: 2 ports detected
[ 0.578756] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 0.578760] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.578763] usb usb4: Product: xHCI Host Controller
[ 0.578766] usb usb4: Manufacturer: Linux 6.1.0-rpi6-rpi-2712 xhci-hcd
[ 0.578769] usb usb4: SerialNumber: xhci-hcd.1
[ 0.578896] hub 4-0:1.0: USB hub found
[ 0.578914] hub 4-0:1.0: 1 port detected
[ 0.579982] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.580411] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.580415] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.580422] platform 1000800000.codec: Adding to iommu group 0
[ 0.580462] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.580465] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.580471] platform 1000880000.pisp_be: Adding to iommu group 0
[ 0.580527] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.580531] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.580539] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[ 0.581222] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.581591] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 0.581593] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 0.581599] platform axi:gpu: Adding to iommu group 1
[ 0.581662] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 0.581669] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[ 0.582228] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.582630] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[ 0.582877] sdhci-brcmstb 1000fff000.mmc: there is not valid maps for state default
[ 0.583315] mmc0: CQHCI version 5.10
[ 0.583403] mmc1: CQHCI version 5.10
[ 0.584960] of_cfs_init
[ 0.584999] of_cfs_init: OK
[ 0.619236] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 0.713547] mmc0: new ultra high speed SDR104 SDHC card at address 5048
[ 0.713840] mmcblk0: mmc0:5048 Y032V 28.9 GiB
[ 0.715578] mmcblk0: p1 p2
[ 0.715696] mmcblk0: mmc0:5048 Y032V 28.9 GiB
[ 0.772670] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 0.775748] Freeing unused kernel memory: 4416K
[ 0.775801] Run /init as init process
[ 0.775804] with arguments:
[ 0.775806] /init
[ 0.775808] splash
[ 0.775810] with environment:
[ 0.775813] HOME=/
[ 0.775815] TERM=linux
[ 0.803721] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 0.830245] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 0.987923] usb 1-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21
[ 0.987933] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.987937] usb 1-1: Product: 4-Port USB 2.0 Hub
[ 0.987940] usb 1-1: Manufacturer: Generic
[ 1.008342] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[ 1.020301] brcmstb-i2c 107d508200.i2c: @200000hz registered in interrupt mode
[ 1.020655] brcmstb-i2c 107d508280.i2c: @200000hz registered in interrupt mode
[ 1.026683] hub 1-1:1.0: USB hub found
[ 1.027623] hub 1-1:1.0: 4 ports detected
[ 1.030310] input: pwr_button as /devices/platform/pwr_button/input/input0
[ 1.094646] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 1.098519] Console: switching to colour dummy device 80x25
[ 1.101638] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 1.105991] Registered IR keymap rc-cec
[ 1.106047] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[ 1.106286] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input1
[ 1.106939] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 1.107962] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[ 1.110482] Registered IR keymap rc-cec
[ 1.110533] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[ 1.110588] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input2
[ 1.112484] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[ 1.112631] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[ 1.112738] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[ 1.112837] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 1.113200] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 1.140181] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21
[ 1.140191] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.140195] usb 2-1: Product: 4-Port USB 3.0 Hub
[ 1.140198] usb 2-1: Manufacturer: Generic
[ 1.162808] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[ 1.203868] hub 2-1:1.0: USB hub found
[ 1.205320] hub 2-1:1.0: 4 ports detected
[ 1.232378] Console: switching to colour frame buffer device 480x135
[ 1.255505] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
[ 1.386130] usb 1-1.3: new full-speed USB device number 3 using xhci-hcd
[ 1.487604] usb 1-1.3: New USB device found, idVendor=04d8, idProduct=eec5, bcdDevice= 1.01
[ 1.487614] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.487617] usb 1-1.3: Product: Drop Hub
[ 1.487621] usb 1-1.3: Manufacturer: Drop Inc.
[ 1.487624] usb 1-1.3: SerialNumber: Unavailable
[ 1.536537] hub 1-1.3:1.0: USB hub found
[ 1.536671] hub 1-1.3:1.0: 2 ports detected
[ 1.618133] usb 1-1.4: new full-speed USB device number 4 using xhci-hcd
[ 1.649713] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 1.724947] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01
[ 1.724955] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.724959] usb 1-1.4: Product: USB Receiver
[ 1.724962] usb 1-1.4: Manufacturer: Logitech
[ 1.825552] input: Logitech USB Receiver as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C548.0001/input/input3
[ 1.842137] usb 1-1.3.2: new full-speed USB device number 5 using xhci-hcd
[ 1.886365] hid-generic 0003:046D:C548.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0-1.4/input0
[ 1.888468] input: Logitech USB Receiver Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C548.0002/input/input4
[ 1.888588] input: Logitech USB Receiver Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C548.0002/input/input5
[ 1.946211] input: Logitech USB Receiver System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C548.0002/input/input6
[ 1.946309] hid-generic 0003:046D:C548.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0-1.4/input1
[ 1.947772] hid-generic 0003:046D:C548.0003: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.0-1.4/input2
[ 1.948223] usb 1-1.3.2: New USB device found, idVendor=04d8, idProduct=eed3, bcdDevice= 1.00
[ 1.948228] usb 1-1.3.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 1.948232] usb 1-1.3.2: Product: "ALT"
[ 1.948235] usb 1-1.3.2: Manufacturer: "Drop"
[ 1.948238] usb 1-1.3.2: SerialNumber: AD3BBAE7DBCF3AB8
[ 2.014682] NET: Registered PF_INET6 protocol family
[ 2.015264] Segment Routing with IPv6
[ 2.015274] In-situ OAM (IOAM) with IPv6
[ 2.049028] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 2.049042] systemd[1]: Detected architecture arm64.
[ 2.049402] input: "Drop" "ALT" as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:04D8:EED3.0004/input/input7
[ 2.054047] systemd[1]: Hostname set to <five>.
[ 2.106416] hid-generic 0003:04D8:EED3.0004: input,hidraw3: USB HID v1.10 Keyboard ["Drop" "ALT"] on usb-xhci-hcd.0-1.3.2/input0
[ 2.107286] hid-generic 0003:04D8:EED3.0005: hiddev97,hidraw4: USB HID v1.10 Device ["Drop" "ALT"] on usb-xhci-hcd.0-1.3.2/input1
[ 2.112561] input: "Drop" "ALT" Mouse as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/0003:04D8:EED3.0006/input/input8
[ 2.112747] input: "Drop" "ALT" System Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/0003:04D8:EED3.0006/input/input9
[ 2.170291] input: "Drop" "ALT" Consumer Control as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/0003:04D8:EED3.0006/input/input10
[ 2.170364] input: "Drop" "ALT" Keyboard as /devices/platform/axi/1000120000.pcie/1f00200000.usb/xhci-hcd.0/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/0003:04D8:EED3.0006/input/input11
[ 2.170688] hid-generic 0003:04D8:EED3.0006: input,hidraw5: USB HID v1.10 Mouse ["Drop" "ALT"] on usb-xhci-hcd.0-1.3.2/input2
[ 2.360244] systemd[1]: Queued start job for default target graphical.target.
[ 2.379127] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 2.379579] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 2.379913] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 2.380140] systemd[1]: Created slice user.slice - User and Session Slice.
[ 2.380276] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 2.380570] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 2.380647] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 2.380697] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
[ 2.380740] systemd[1]: Reached target slices.target - Slice Units.
[ 2.380767] systemd[1]: Reached target swap.target - Swaps.
[ 2.380802] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 2.381019] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 2.381114] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 2.381576] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 2.381796] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 2.382030] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 2.383489] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 2.383702] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 2.383949] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 2.385130] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 2.386484] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 2.388035] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 2.388250] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 2.393703] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 2.395865] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 2.397561] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 2.399551] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 2.401393] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 2.403982] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 2.406297] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 2.408278] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 2.410385] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 2.410656] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 2.414211] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 2.432550] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 2.434724] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 2.436255] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 2.439910] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 2.440348] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 2.440728] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 2.441859] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 2.442109] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 2.443653] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 2.443968] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 2.444778] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 2.445059] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 2.445564] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 2.445770] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 2.446436] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 2.451705] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 2.451839] fuse: init (API version 7.37)
[ 2.453005] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 2.453263] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 2.455596] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 2.455812] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 2.456636] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 2.456896] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 2.459241] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 2.463298] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 2.464385] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 2.471849] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
[ 2.473645] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 2.474044] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 2.474108] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 2.475419] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 2.476963] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 2.481265] i2c_dev: i2c /dev entries driver
[ 2.482635] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 2.484390] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 2.507829] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 2.544734] systemd[1]: Started systemd-journald.service - Journal Service.
[ 2.579833] systemd-journald[316]: Received client request to flush runtime journal.
[ 3.408819] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 3.409000] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 3.410324] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 3.420404] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 3.423145] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 3.442412] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 3.445804] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 3.475093] pinctrl-rp1 1f000d0000.gpio: pin gpio18 already requested by 1f000a0000.i2s; cannot claim for 1f000a4000.i2s
[ 3.475106] pinctrl-rp1 1f000d0000.gpio: pin-18 (1f000a4000.i2s) status -22
[ 3.475111] pinctrl-rp1 1f000d0000.gpio: could not request pin 18 (gpio18) from group gpio18 on device pinctrl-rp1
[ 3.475117] designware-i2s 1f000a4000.i2s: Error applying setting, reverse things back
[ 3.479610] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 3.481916] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 3.494235] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 3.526756] mc: Linux media interface: v0.10
[ 3.553255] videodev: Linux video capture interface: v2.00
[ 3.711050] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.726320] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 3.749807] pispbe 1000880000.pisp_be: pispbe_probe: HW version: 0x02252700
[ 3.749817] pispbe 1000880000.pisp_be: pispbe_probe: BatchStatus: 0x00000000
[ 3.749821] pispbe 1000880000.pisp_be: pispbe_probe: Status: 0x00000000
[ 3.749824] pispbe 1000880000.pisp_be: Register nodes for group 0
[ 3.764631] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 3.771959] pispbe 1000880000.pisp_be: input device node registered as /dev/video20
[ 3.772104] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video21
[ 3.772235] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video22
[ 3.772349] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video23
[ 3.772453] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video24
[ 3.772532] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video25
[ 3.772619] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video26
[ 3.772698] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video27
[ 3.772768] pispbe 1000880000.pisp_be: config device node registered as /dev/video28
[ 3.773186] pispbe 1000880000.pisp_be: Register nodes for group 1
[ 3.817392] pispbe 1000880000.pisp_be: input device node registered as /dev/video29
[ 3.822469] rpivid 1000800000.codec: Device registered as /dev/video19
[ 3.846653] pispbe 1000880000.pisp_be: tdn_input device node registered as /dev/video30
[ 3.847495] pispbe 1000880000.pisp_be: stitch_input device node registered as /dev/video31
[ 3.847597] pispbe 1000880000.pisp_be: hog_output device node registered as /dev/video32
[ 3.847695] pispbe 1000880000.pisp_be: output0 device node registered as /dev/video33
[ 3.847789] pispbe 1000880000.pisp_be: output1 device node registered as /dev/video34
[ 3.847869] pispbe 1000880000.pisp_be: tdn_output device node registered as /dev/video35
[ 3.847997] pispbe 1000880000.pisp_be: stitch_output device node registered as /dev/video36
[ 3.848073] pispbe 1000880000.pisp_be: config device node registered as /dev/video37
[ 4.048682] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.050676] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 4.051022] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 4.051347] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.138627] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 4.146604] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 4.147405] usbcore: registered new interface driver brcmfmac
[ 4.175337] Bluetooth: Core ver 2.22
[ 4.175398] NET: Registered PF_BLUETOOTH protocol family
[ 4.175402] Bluetooth: HCI device and connection manager initialized
[ 4.175412] Bluetooth: HCI socket layer initialized
[ 4.175417] Bluetooth: L2CAP socket layer initialized
[ 4.175427] Bluetooth: SCO socket layer initialized
[ 4.215976] Bluetooth: HCI UART driver ver 2.3
[ 4.215986] Bluetooth: HCI UART protocol H4 registered
[ 4.216173] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 4.216450] Bluetooth: HCI UART protocol Broadcom registered
[ 4.216502] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 4.216592] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 4.387512] Adding 102384k swap on /var/swap. Priority:-2 extents:1 across:102384k SSFS
[ 4.426576] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 4.575061] Bluetooth: hci0: BCM: chip id 107
[ 4.575477] Bluetooth: hci0: BCM: features 0x2f
[ 4.576681] Bluetooth: hci0: BCM4345C0
[ 4.576690] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 4.605304] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[ 5.294854] Bluetooth: hci0: BCM: features 0x2f
[ 5.296224] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 5.296230] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 5.296541] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
[ 5.418782] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[ 5.418801] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 5.423278] pps pps0: new PPS source ptp0
[ 5.423345] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[ 5.435235] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 5.482056] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 5.482064] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 5.515485] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.515496] Bluetooth: BNEP filters: protocol multicast
[ 5.515509] Bluetooth: BNEP socket layer initialized
[ 5.523179] Bluetooth: MGMT ver 1.22
[ 5.530092] NET: Registered PF_ALG protocol family
[ 9.535234] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 9.535257] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.112360] Bluetooth: RFCOMM TTY layer initialized
[ 10.112377] Bluetooth: RFCOMM socket layer initialized
[ 10.112390] Bluetooth: RFCOMM ver 1.11
[ 10.498033] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 14.302394] i2c 1-0062: deferred probe pending
[ 14.302402] i2c 1-004c: deferred probe pending
[ 14.302404] platform soc:sound: deferred probe pending
If you would, please can you advise a way forward?
