This is what i have now, but there is one thing left to do. I want to feed RPi and Digi + separately. I have a second power line on the PSU board for this purpose and going to throw 5v and GND straight to RPi's GPIO pins (2nd and 6th) Hope it's possible to bend these pins somehow, because i don't want to use a ribbon cable to connect RPi with Hifiberry HAT.
This looks very nice. No problems with the heat generated by the linear PSU?
Best regards,
Daniel
Thanks, Daniel. Actually the radiators are slightly warm even if the case is closed. The max level of current for this LPS board is about 7,5A and RPi with Digi+ consuming about 2-2,5A in conjunction, the LCD takes about 200mA, so there is not so much heat is emitted.