Hifiberry digi+ standard not working


My hifiberry digi+ standard not working : No sound with coax or TOSLink.

Card is correctly detected on my raspberrypi 2. I use your distribution of rasbian.

aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: sndrpihifiberry [snd_rpi_hifiberry_digi], périphérique 0: HifiBerry Digi HiFi wm8804-spdif-0 []
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0

config.txt :
# Enable audio (loads snd_bcm2835)

But when I launch player, there is no sound on my amplifier (Yamaha). I test 2 TOSLink cables, but there no red light with this 2 cables. I test this 2 cables with my TV and all works fine.
I test also hifiberry with coax, and there is also no sound.

Example :
mplayer 01_Si_Tu_Savais.mp3
MPlayer2 2.0-728-g2c378c7-4+b1 (C) 2000-2012 MPlayer Team
Cannot open file '/home/pi/.mplayer/input.conf': No such file or directory
Failed to open /home/pi/.mplayer/input.conf.
Cannot open file '/etc/mplayer/input.conf': No such file or directory
Failed to open /etc/mplayer/input.conf.

Playing 01_Si_Tu_Savais.mp3.
Detected file format: MP2/3 (MPEG audio layer 2/3) (libavformat)
[mp3 @ 0x75b975b8]max_analyze_duration 5000000 reached
[lavf] stream 0: audio (mp3), -aid 0
[lavf] stream 1: video (mjpeg), -vid 0, Yannick_Noah___Pokhara.jpg
Clip info:
 title: Si tu savais
 artist: Yannick Noah
 album: Pokhara
 track: 01/13
 genre: Variété française
 TLEN: 208000
 date: 2003
Load subtitles in .
Selected audio codec: MPEG 1.0/2.0/2.5 layers I, II, III [mpg123]
AUDIO: 44100 Hz, 2 ch, s16le, 32.0 kbit/2.27% (ratio: 4000->176400)
AO: [pulse] Init failed: Connection refused
AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample)
[AO_ALSA] Unable to find simple control 'Master',0.
Video: no video
Starting playback...
A:   8.7 (08.6) of 208.5 (03:28.5)  3.0%

There is no sound, but all seem to be OK.

Have you an solution for this problem ?



Post is closed for comments.