Digi + Pro working with Moode 3.1 ?

Alain

February 05, 2017 16:30

None

Hello,

I'can't make it work.

(with a RPI2 / hw 1.2)

Thank you in advance.

Alain

Date Votes

8 comments

0

HiFiBerry team February 05, 2017 17:34

Hi Alain,

as far as I know the latest Moode version supports the DIgi+ Pro. I don't know which version this is. What exactly did you dod to configure it. What is the output of "aplay -l"?

Best regards,
Daniel

Comment actions Permalink
0

Alain February 05, 2017 18:22

Hi Daniel,

OUTPUT:

aplay:device_list:268: no soundcards found ...

Other information: linux kernel 4.4.30-v7+

Best Regards,

Alain

Comment actions Permalink
0

HiFiBerry team February 06, 2017 06:02

Hi,

I can't say if this is a problem with Moode or any hardware issue. I recommend to install our Raspbian from here:
https://www.hifiberry.com/build/download/

Check if the Digi+ Pro is recognized with this image.

Best regards,
Daniel

Comment actions Permalink
0

Alain February 06, 2017 09:51

Thank you Daniel for your fast support.

I'm doing it ASAP.

Alain

Comment actions Permalink
0

Alain February 07, 2017 20:39

Hi,

Same result with Hifierry's Raspbian.

Possible I haven't taken enough protection against EST when I installed the board.

Alain

Comment actions Permalink
0

Alain February 07, 2017 20:40

ESD, electrostatic discharge.

Comment actions Permalink
0

HiFiBerry team February 07, 2017 20:45

Hi,

it might be a hardware problem, but it's still possible that's a software problem. Can you post the output of "dmesg | grep -i hifiberry"

Best regards,
Daniel

Comment actions Permalink
0

Alain February 11, 2017 22:51

It works very well.

Problem was due to an hardware problem of the raspberry pi2.

Excellent support given by Daniel.

Alain

Comment actions Permalink

Please sign in to leave a comment.