-1

Digi+ Pro not seen

I've been trying to get the Digi+ Pro working for some time. I tried runeaudio: didn't work. So downloaded the hifiberry installer from your downloads area. That didn't work. ran an apt-get update/upgrade then rpi-update.

Volumio runs OK but there's no output and and no option for a Digi+ Pro in the Volumion system options.

/etc/modules is empty.

dmesg (relevant bits) shows:

[    2.759972] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered

[    2.764985] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517

[    2.784286] pcm512x 1-004d: Failed to reset device: -5

[    2.789987] pcm512x: probe of 1-004d failed with error -5

[    2.797441] wm8804 1-003b: revision E

[    2.803851] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered

[    2.808914] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517

[    2.874462] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered

[    2.879656] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517

[    2.892010] usbcore: registered new interface driver brcmfmac

[    2.893215] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered

[    2.893224] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517

[    2.908976] brcmfmac_sdio mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2

So, any ideas?

TIA

5 comments

Please sign in to leave a comment.