0

Can't select the dac+ libreelec

Hello,

 

I have just recieved my dac + and added the lines:

dtoverlay=hifiberry-dacplus
dtdebug=1

To the config.txt as described on the Hifiberry page.

Rebooted the system, but now I can't select the dac+ in de audio menu.

Here is the output log:

01009.694: HDMI:EDID version 1.3, 1 extensions, screen size 53x30 cm
001009.758: HDMI:EDID features - videodef 0x80 standby suspend active off; colour encoding:RGB444|YCbCr422; sRGB is not default colourspace; preferred format is native; does not support GTF
001009.818: HDMI:EDID found preferred CEA detail timing format: 1920x1080p @ 60 Hz (16)
001009.859: HDMI:EDID found DMT format: code 4, 640x480p @ 60 Hz in established timing I/II
001009.898: HDMI:EDID found DMT format: code 5, 640x480p @ 72 Hz in established timing I/II
001009.934: HDMI:EDID found DMT format: code 6, 640x480p @ 75 Hz in established timing I/II
001009.972: HDMI:EDID found DMT format: code 8, 800x600p @ 56 Hz in established timing I/II
001010.009: HDMI:EDID found DMT format: code 9, 800x600p @ 60 Hz in established timing I/II
001010.048: HDMI:EDID found DMT format: code 10, 800x600p @ 72 Hz in established timing I/II
001010.084: HDMI:EDID found DMT format: code 11, 800x600p @ 75 Hz in established timing I/II
001010.121: HDMI:EDID found DMT format: code 16, 1024x768p @ 60 Hz in established timing I/II
001010.158: HDMI:EDID found DMT format: code 17, 1024x768p @ 70 Hz in established timing I/II
001010.197: HDMI:EDID found DMT format: code 18, 1024x768p @ 75 Hz in established timing I/II
001010.238: HDMI:EDID found DMT format: code 36, 1280x1024p @ 75 Hz in established timing I/II
001010.325: HDMI:EDID standard timings block x 8: 0x714F 8180 8140 9500 A940 B300 D1C0 0101
001010.377: HDMI:EDID found DMT format: code 21, 1152x864p @ 75 Hz (4:3) in standard timing 0
001010.431: HDMI:EDID found DMT format: code 35, 1280x1024p @ 60 Hz (5:4) in standard timing 1
001010.479: HDMI:EDID found DMT format: code 32, 1280x960p @ 60 Hz (4:3) in standard timing 2
001010.530: HDMI:EDID found DMT format: code 47, 1440x900p @ 60 Hz (16:10) in standard timing 3
001010.582: HDMI:EDID found DMT format: code 51, 1600x1200p @ 60 Hz (4:3) in standard timing 4
001010.632: HDMI:EDID found DMT format: code 58, 1680x1050p @ 60 Hz (16:10) in standard timing 5
001010.688: HDMI:EDID found DMT format: code 82, 1920x1080p @ 60 Hz (16:9) in standard timing 6
001023.701: HDMI:EDID parsing v3 CEA extension 0
001023.740: HDMI:EDID monitor support - underscan IT formats:yes, basic audio:yes, yuv444:yes, yuv422:yes, #native DTD:1
001023.839: HDMI:EDID found unknown detail timing format: 1920x1080p hfp:48 hs:32 hbp:80 vfp:3 vs:5 vbp:22 pixel clock:138 MHz
001023.899: HDMI:EDID found DMT detail timing format: 1366x768p @ 60 Hz (81)
001023.941: HDMI:EDID found CEA detail timing format: 1280x720p @ 60 Hz (4)
001023.983: HDMI:EDID found CEA detail timing format: 720x480p @ 60 Hz (2)
001024.025: HDMI:EDID found CEA detail timing format: 1920x1080i @ 60 Hz (5)
001024.059: HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz (native)
001024.091: HDMI:EDID found CEA format: code 5, 1920x1080i @ 60Hz
001024.124: HDMI:EDID found CEA format: code 4, 1280x720p @ 60Hz
001024.157: HDMI:EDID found CEA format: code 3, 720x480p @ 60Hz
001024.188: HDMI:EDID found CEA format: code 2, 720x480p @ 60Hz
001024.220: HDMI:EDID found CEA format: code 1, 640x480p @ 60Hz
001024.252: HDMI:EDID found CEA format: code 17, 720x576p @ 50Hz
001024.285: HDMI:EDID found CEA format: code 18, 720x576p @ 50Hz
001024.318: HDMI:EDID found CEA format: code 19, 1280x720p @ 50Hz
001024.350: HDMI:EDID found CEA format: code 20, 1920x1080i @ 50Hz
001024.383: HDMI:EDID found CEA format: code 31, 1920x1080p @ 50Hz
001024.438: HDMI:EDID found audio format 2 channels PCM, sample rate: 32|44|48 kHz, sample size: 16|20|24 bits
001024.454: HDMI:EDID found HDMI VSDB length 5
001024.481: HDMI:EDID HDMI VSDB has physical address 1.0.0.0
001024.495: HDMI:EDID HDMI VSDB has no extension fields
001024.537: HDMI:EDID filtering formats with pixel clock > 162 MHz or h. blanking > 1023
001024.728: HDMI:EDID preferred mode remained as CEA (16) 1920x1080p @ 60 Hz with pixel clock 148 MHz
001040.211: HDMI:Setting property pixel encoding to Default
001040.230: HDMI:Setting property pixel clock type to PAL
001040.248: HDMI:Setting property content type flag to No data
001040.266: HDMI:Setting property fuzzy format match to enabled
001227.785: hdmi: HDMI:>>>>>>>>>>>>>Rx sensed, reading EDID<<<<<<<<<<<<<
001239.925: hdmi: HDMI:EDID version 1.3, 1 extensions, screen size 53x30 cm
001239.995: hdmi: HDMI:EDID features - videodef 0x80 standby suspend active off; colour encoding:RGB444|YCbCr422; sRGB is not default colourspace; preferred format is native; does not support GTF
001240.055: hdmi: HDMI:EDID found preferred CEA detail timing format: 1920x1080p @ 60 Hz (16)
001240.100: hdmi: HDMI:EDID found DMT format: code 4, 640x480p @ 60 Hz in established timing I/II
001240.140: hdmi: HDMI:EDID found DMT format: code 5, 640x480p @ 72 Hz in established timing I/II
001240.182: hdmi: HDMI:EDID found DMT format: code 6, 640x480p @ 75 Hz in established timing I/II
001240.223: hdmi: HDMI:EDID found DMT format: code 8, 800x600p @ 56 Hz in established timing I/II
001240.264: hdmi: HDMI:EDID found DMT format: code 9, 800x600p @ 60 Hz in established timing I/II
001240.304: hdmi: HDMI:EDID found DMT format: code 10, 800x600p @ 72 Hz in established timing I/II
001240.346: hdmi: HDMI:EDID found DMT format: code 11, 800x600p @ 75 Hz in established timing I/II
001240.390: hdmi: HDMI:EDID found DMT format: code 16, 1024x768p @ 60 Hz in established timing I/II
001240.433: hdmi: HDMI:EDID found DMT format: code 17, 1024x768p @ 70 Hz in established timing I/II
001240.473: hdmi: HDMI:EDID found DMT format: code 18, 1024x768p @ 75 Hz in established timing I/II
001240.518: hdmi: HDMI:EDID found DMT format: code 36, 1280x1024p @ 75 Hz in established timing I/II
001240.607: hdmi: HDMI:EDID standard timings block x 8: 0x714F 8180 8140 9500 A940 B300 D1C0 0101
001240.661: hdmi: HDMI:EDID found DMT format: code 21, 1152x864p @ 75 Hz (4:3) in standard timing 0
001240.715: hdmi: HDMI:EDID found DMT format: code 35, 1280x1024p @ 60 Hz (5:4) in standard timing 1
001240.769: hdmi: HDMI:EDID found DMT format: code 32, 1280x960p @ 60 Hz (4:3) in standard timing 2
001240.825: hdmi: HDMI:EDID found DMT format: code 47, 1440x900p @ 60 Hz (16:10) in standard timing 3
001240.879: hdmi: HDMI:EDID found DMT format: code 51, 1600x1200p @ 60 Hz (4:3) in standard timing 4
001240.936: hdmi: HDMI:EDID found DMT format: code 58, 1680x1050p @ 60 Hz (16:10) in standard timing 5
001240.997: hdmi: HDMI:EDID found DMT format: code 82, 1920x1080p @ 60 Hz (16:9) in standard timing 6
001254.015: hdmi: HDMI:EDID parsing v3 CEA extension 0
001254.057: hdmi: HDMI:EDID monitor support - underscan IT formats:yes, basic audio:yes, yuv444:yes, yuv422:yes, #native DTD:1
001254.159: hdmi: HDMI:EDID failed to find a matching detail format for 1920x1080p hfp:48 hs:32 hbp:80 vfp:3 vs:5 vbp:22 pixel clock:138 MHz
001254.181: hdmi: HDMI:EDID calculated refresh rate is 60 Hz
001254.213: hdmi: HDMI:EDID guessing the format to be 1920x1080p @60 Hz
001254.258: hdmi: HDMI:EDID found CEA detail timing format: 1920x1080p @ 60 Hz (16)
001254.321: hdmi: HDMI:EDID found DMT detail timing format: 1366x768p @ 60 Hz (81)
001254.365: hdmi: HDMI:EDID found CEA detail timing format: 1280x720p @ 60 Hz (4)
001254.409: hdmi: HDMI:EDID found CEA detail timing format: 720x480p @ 60 Hz (2)
001254.456: hdmi: HDMI:EDID found CEA detail timing format: 1920x1080i @ 60 Hz (5)
001254.497: hdmi: HDMI:EDID found CEA format: code 16, 1920x1080p @ 60Hz (native)
001254.534: hdmi: HDMI:EDID found CEA format: code 5, 1920x1080i @ 60Hz
001254.569: hdmi: HDMI:EDID found CEA format: code 4, 1280x720p @ 60Hz
001254.604: hdmi: HDMI:EDID found CEA format: code 3, 720x480p @ 60Hz
001254.640: hdmi: HDMI:EDID found CEA format: code 2, 720x480p @ 60Hz
001254.676: hdmi: HDMI:EDID found CEA format: code 1, 640x480p @ 60Hz
001254.713: hdmi: HDMI:EDID found CEA format: code 17, 720x576p @ 50Hz
001254.750: hdmi: HDMI:EDID found CEA format: code 18, 720x576p @ 50Hz
001254.786: hdmi: HDMI:EDID found CEA format: code 19, 1280x720p @ 50Hz
001254.823: hdmi: HDMI:EDID found CEA format: code 20, 1920x1080i @ 50Hz
001254.860: hdmi: HDMI:EDID found CEA format: code 31, 1920x1080p @ 50Hz
001254.917: hdmi: HDMI:EDID found audio format 2 channels PCM, sample rate: 32|44|48 kHz, sample size: 16|20|24 bits
001254.940: hdmi: HDMI:EDID found HDMI VSDB length 5
001254.969: hdmi: HDMI:EDID HDMI VSDB has physical address 1.0.0.0
001254.989: hdmi: HDMI:EDID HDMI VSDB has no extension fields
001255.037: hdmi: HDMI:EDID filtering formats with pixel clock > 162 MHz or h. blanking > 1023
001255.234: hdmi: HDMI:EDID preferred mode remained as CEA (16) 1920x1080p @ 60 Hz with pixel clock 148 MHz
001255.257: hdmi: HDMI: hotplug attached with HDMI support
001255.324: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
001257.789: hdmi: HDMI: power_on to CEA mode 1080p60
001260.959: hdmi: HDMI: Action callback added to queue to happen at frame 2
001260.980: hdmi: HDMI: Action stop_3d_mode added to queue to happen at frame 2
001261.004: hdmi: HDMI: Action unmute added to queue to happen at frame 3
001328.154: *** Restart logging
001329.082: Read command line from file 'cmdline.txt'
boot=UUID=339D-074F disk=UUID=6584f9bd-5741-49fc-9d8f-2f7fff184b32 quiet
001669.770: Loading 'kernel.img' to 0x8000 size 0x57f098
001679.316: Kernel trailer DTOK property says yes
001679.330: Kernel trailer DDTK property says yes
001681.737: Loading 'bcm2710-rpi-3-b.dtb' to 0x587098 size 0x3b85
001692.439: dtdebug: delete_node(/__local_fixups__)
001698.557: dtdebug: /aliases:i2c_vc=i2c0
001703.974: dtdebug: /__symbols__:i2c_vc=i2c0
001708.333: dtdebug: /__overrides__:i2c_vc=i2c0
001716.752: dtdebug: /__overrides__:i2c_vc_baudrate=i2c0_baudrate
001719.795: dtdebug: /aliases:i2c=i2c1
001725.400: dtdebug: /__symbols__:i2c=i2c1
001729.896: dtdebug: /__overrides__:i2c=i2c1
001732.971: dtdebug: /aliases:i2c_arm=i2c1
001738.614: dtdebug: /__symbols__:i2c_arm=i2c1
001743.104: dtdebug: /__overrides__:i2c_arm=i2c1
001751.701: dtdebug: /__overrides__:i2c_baudrate=i2c1_baudrate
001760.335: dtdebug: /__overrides__:i2c_arm_baudrate=i2c1_baudrate
001760.361: dtparam: uart0_clkrate=48000000
001763.240: dtdebug: Found override uart0_clkrate
001763.290: dtdebug: override uart0_clkrate: cell target clock-frequency @ offset 0 (size 4)
001775.376: dtdebug: Opened overlay file 'overlays/hifiberry-dacplus.dtbo'
001790.060: Loaded overlay 'hifiberry-dacplus'
001790.137: dtdebug: Found fragment 0 (offset 36)
001796.040: dtdebug: merge_fragment(/clocks,/fragment@0/__overlay__)
001800.829: dtdebug: merge_fragment(/clocks/dacpro_osc,/fragment@0/__overlay__/dacpro_osc)
001800.856: dtdebug: +prop(compatible)
001801.637: dtdebug: +prop(#clock-cells)
001802.518: dtdebug: +prop(phandle)
001803.385: dtdebug: merge_fragment() end
001803.412: dtdebug: merge_fragment() end
001803.486: dtdebug: Found fragment 1 (offset 184)
001808.090: dtdebug: merge_fragment(/soc/i2s@7e203000,/fragment@1/__overlay__)
001808.115: dtdebug: +prop(status)
001809.586: dtdebug: merge_fragment() end
001809.643: dtdebug: Found fragment 2 (offset 260)
001817.387: dtdebug: merge_fragment(/soc/i2c@7e804000,/fragment@2/__overlay__)
001817.415: dtdebug: +prop(#address-cells)
001818.554: dtdebug: +prop(#size-cells)
001819.701: dtdebug: +prop(status)
001824.594: dtdebug: merge_fragment(/soc/i2c@7e804000/pcm5122@4d,/fragment@2/__overlay__/pcm5122@4d)
001824.619: dtdebug: +prop(#sound-dai-cells)
001825.859: dtdebug: +prop(compatible)
001826.974: dtdebug: +prop(reg)
001828.163: dtdebug: +prop(clocks)
001829.347: dtdebug: +prop(status)
001830.595: dtdebug: merge_fragment() end
001830.627: dtdebug: merge_fragment() end
001830.708: dtdebug: Found fragment 3 (offset 480)
001840.897: dtdebug: merge_fragment(/soc/sound,/fragment@3/__overlay__)
001840.924: dtdebug: +prop(compatible)
001841.817: dtdebug: +prop(i2s-controller)
001843.117: dtdebug: +prop(status)
001844.015: dtdebug: merge_fragment() end
001848.244: dtdebug: /aliases:serial0=uart1
001851.359: dtdebug: /aliases:serial1=uart0
001851.465: dtparam: uart1=off
001854.421: dtdebug: Found override uart1
001854.456: dtdebug: override uart1: string target 'status'
001911.891: dtparam: arm_freq=1200000000
001914.937: dtdebug: Found override arm_freq
001914.987: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4)
001924.825: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4)
001934.760: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4)
001944.781: dtdebug: override arm_freq: cell target clock-frequency @ offset 0 (size 4)
001954.867: dtparam: core_freq=400000000
001958.044: dtdebug: Found override core_freq
001958.092: dtdebug: override core_freq: cell target clock-frequency @ offset 0 (size 4)
001966.397: dtparam: cache_line_size=64
001969.435: dtdebug: Found override cache_line_size
001969.483: dtdebug: override cache_line_size: cell target cache-line-size @ offset 0 (size 4)
001977.897: dtdebug: delete_node(/hat)
001985.204: Device tree loaded to 0x2efebe00 (size 0x4102)
001987.425: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
003709.931: vchiq_core: vchiq_init_state: slot_zero = 0xee880000, is_master = 1
003714.118: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
003719.152: TV service:host side not connected, dropping notification 0x00000002, 0x00000001, 0x00000010
010746.812: hdmi: HDMI:Setting property pixel clock type to PAL
010746.881: hdmi: HDMI: power_on to CEA mode 1080p60
010746.915: hdmi: HDMI: Action detach added to queue to happen at frame 559
010746.930: hdmi: HDMI: Action change_mode added to queue to happen at frame 559
010746.944: hdmi: HDMI: Action attach added to queue to happen at frame 559
010746.958: hdmi: HDMI: Action start_mode added to queue to happen at frame 559
010746.974: hdmi: HDMI: Action callback added to queue to happen at frame 561
010746.989: hdmi: HDMI: Action stop_3d_mode added to queue to happen at frame 561
010747.005: hdmi: HDMI: Action unmute added to queue to happen at frame 562

 

It looks like it is loading the overlay but why can't I select it then?

 

I hope you guys can help me.

0 comments

Please sign in to leave a comment.