Hello,
since yesterday the left audio output is missing on my Raspberry system. I am currently using Libreelec V9.2.8 with a RPI 4.
Is the Hifiberry DAC+ card broken or am I too stupid and have something wrong?
Here the dmesg file:
LibreELEC (official): 9.2.8 (RPi4.arm)
Libre-R4:~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.127 (jenkins@tsuboi) (gcc version 8.3.0 (GCC)) #1 SMP Tue Jul 6 19:08:37 CEST 2021
[ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 256 MiB at 0x000000001bc00000
[ 0.000000] On node 0 totalpages: 442368
[ 0.000000] DMA zone: 1584 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 180224 pages, LIFO batch:63
[ 0.000000] HighMem zone: 262144 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4d8 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s37580 r8192 d23860 u69632
[ 0.000000] pcpu-alloc: s37580 r8192 d23860 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 440784
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:33:82:01 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 boot=UUID=0106-1615 disk=UUID=f8fb3cf4-a55b-465a-8b04-55bf7c747aef quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1468216K/1769472K available (10240K kernel code, 760K rwdata, 2256K rodata, 6144K init, 559K bss, 39112K reserved, 262144K cma-reserved, 1048576K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xec800000 - 0xff800000 ( 304 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xec000000 ( 704 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (6144 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 761 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 560 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 32912 entries in 97 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000017] Switching to timer-based delay loop, resolution 18ns
[ 0.000272] Console: colour dummy device 80x30
[ 0.000306] console [tty0] enabled
[ 0.000358] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)
[ 0.000379] pid_max: default: 32768 minimum: 301
[ 0.000578] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000603] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001396] CPU: Testing write buffer coherency: ok
[ 0.001931] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002759] Setting up static identity map for 0x200000 - 0x20003c
[ 0.002963] rcu: Hierarchical SRCU implementation.
[ 0.005679] smp: Bringing up secondary CPUs ...
[ 0.006802] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.008039] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.009208] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.009359] smp: Brought up 1 node, 4 CPUs
[ 0.009375] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[ 0.009388] CPU: All CPU(s) started in HYP mode.
[ 0.009400] CPU: Virtualization extensions available.
[ 0.010242] devtmpfs: initialized
[ 0.021810] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[ 0.022070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.022098] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.028484] pinctrl core: initialized pinctrl subsystem
[ 0.029549] NET: Registered protocol family 16
[ 0.033673] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.034760] cpuidle: using governor ladder
[ 0.034809] cpuidle: using governor menu
[ 0.035341] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.035355] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.035607] Serial: AMBA PL011 UART driver
[ 0.040493] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.050218] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-06-26 14:49, variant start_x
[ 0.053565] raspberrypi-firmware soc:firmware: Firmware hash is b078012603a6a094178f959805996ad225a0d83b
[ 0.096384] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.101260] vgaarb: loaded
[ 0.101591] SCSI subsystem initialized
[ 0.101808] usbcore: registered new interface driver usbfs
[ 0.101878] usbcore: registered new interface driver hub
[ 0.101996] usbcore: registered new device driver usb
[ 0.102598] Advanced Linux Sound Architecture Driver Initialized.
[ 0.103660] clocksource: Switched to clocksource arch_sys_counter
[ 0.193052] FS-Cache: Loaded
[ 0.203729] NET: Registered protocol family 2
[ 0.204452] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.204483] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.204546] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.204622] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.204787] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.204822] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205063] NET: Registered protocol family 1
[ 0.205722] RPC: Registered named UNIX socket transport module.
[ 0.205735] RPC: Registered udp transport module.
[ 0.205748] RPC: Registered tcp transport module.
[ 0.205761] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.205781] PCI: CLS 0 bytes, default 64
[ 0.230686] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.233245] Initialise system trusted keyrings
[ 0.233449] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.243072] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.243930] FS-Cache: Netfs 'nfs' registered for caching
[ 0.244607] NFS: Registering the id_resolver key type
[ 0.244658] Key type id_resolver registered
[ 0.244672] Key type id_legacy registered
[ 0.244695] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.245210] FS-Cache: Netfs 'cifs' registered for caching
[ 0.252969] Key type asymmetric registered
[ 0.252985] Asymmetric key parser 'x509' registered
[ 0.253176] bounce: pool size: 64 pages
[ 0.253246] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.253262] io scheduler noop registered (default)
[ 0.253276] io scheduler deadline registered
[ 0.253429] io scheduler cfq registered
[ 0.253444] io scheduler mq-deadline registered
[ 0.253458] io scheduler kyber registered
[ 0.253590] io scheduler bfq registered
[ 0.257474] brcm-pcie fd500000.pcie: could not get clock
[ 0.257575] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 0.257632] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000
[ 0.307049] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[ 0.307294] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 0.307313] pci_bus 0000:00: root bus resource [bus 00-01]
[ 0.307334] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 0.307403] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 0.307632] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 0.310545] PCI: bus0: Fast back to back transfers disabled
[ 0.310569] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.310837] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.310984] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.311407] pci 0000:01:00.0: PME# supported from D0 D3cold
[ 0.314308] PCI: bus1: Fast back to back transfers disabled
[ 0.314327] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[ 0.314393] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 0.314418] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[ 0.314500] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.314524] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 0.314796] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
[ 0.315022] pcieport 0000:00:00.0: Signaling PME with IRQ 53
[ 0.315221] pcieport 0000:00:00.0: AER enabled with IRQ 53
[ 0.315447] pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 0.321460] iproc-rng200 fe104000.rng: hwrng registered
[ 0.321783] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.322435] vc-sm: Videocore shared memory driver
[ 0.329831] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops 0xc0c5fa58)
[ 0.330524] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 0.330540] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.330553] [drm] No driver support for vblank timestamp query.
[ 0.330565] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[ 0.581581] Console: switching to colour frame buffer device 240x67
[ 0.614878] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
[ 0.627429] brd: module loaded
[ 0.627585] loop: module loaded
[ 0.649857] usbcore: registered new interface driver rtsx_usb
[ 0.651053] Loading iSCSI transport class v2.0-870.
[ 0.651498] iscsi: registered transport (tcp)
[ 0.653278] libphy: Fixed MDIO Bus: probed
[ 0.653319] tun: Universal TUN/TAP device driver, 1.6
[ 0.654174] bcmgenet fd580000.genet: failed to get enet clock
[ 0.654195] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[ 0.654217] bcmgenet fd580000.genet: failed to get enet-wol clock
[ 0.654239] bcmgenet fd580000.genet: failed to get enet-eee clock
[ 0.654267] bcmgenet: Skipping UMAC reset
[ 0.654684] unimac-mdio unimac-mdio.-19: DMA mask not set
[ 0.667051] libphy: bcmgenet MII bus: probed
[ 0.694605] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
[ 0.695640] usbcore: registered new interface driver lan78xx
[ 0.695692] usbcore: registered new interface driver dm9601
[ 0.695751] usbcore: registered new interface driver smsc95xx
[ 0.696154] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.696197] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.699022] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
[ 0.699384] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 54
[ 0.700420] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.700438] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.700454] usb usb1: Product: xHCI Host Controller
[ 0.700469] usb usb1: Manufacturer: Linux 4.19.127 xhci-hcd
[ 0.700484] usb usb1: SerialNumber: 0000:01:00.0
[ 0.701082] hub 1-0:1.0: USB hub found
[ 0.701175] hub 1-0:1.0: 1 port detected
[ 0.701722] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.701749] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.701773] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 0.702240] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 0.702257] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.702272] usb usb2: Product: xHCI Host Controller
[ 0.702287] usb usb2: Manufacturer: Linux 4.19.127 xhci-hcd
[ 0.702302] usb usb2: SerialNumber: 0000:01:00.0
[ 0.702889] hub 2-0:1.0: USB hub found
[ 0.702988] hub 2-0:1.0: 4 ports detected
[ 0.704475] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.704789] dwc_otg: FIQ enabled
[ 0.704801] dwc_otg: NAK holdoff enabled
[ 0.704814] dwc_otg: FIQ split-transaction FSM enabled
[ 0.704830] Module dwc_common_port init
[ 0.705271] usbcore: registered new interface driver uas
[ 0.705388] usbcore: registered new interface driver usb-storage
[ 0.705595] mousedev: PS/2 mouse device common for all mice
[ 0.705986] i2c /dev entries driver
[ 0.708879] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.711219] sdhci: Secure Digital Host Controller Interface driver
[ 0.711231] sdhci: Copyright(c) Pierre Ossman
[ 0.711801] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[ 0.712479] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.718120] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.718187] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.719410] usbcore: registered new interface driver usbhid
[ 0.719415] usbhid: USB HID core driver
[ 0.719858] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.720948] [vc_sm_connected_init]: start
[ 0.727142] [vc_sm_connected_init]: end - returning 0
[ 0.727775] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 0.727783] [vc_sm_connected_init]: start
[ 0.727964] [vc_sm_connected_init]: installed successfully
[ 0.729226] NET: Registered protocol family 10
[ 0.730201] Segment Routing with IPv6
[ 0.730266] NET: Registered protocol family 17
[ 0.730424] Key type dns_resolver registered
[ 0.730690] Registering SWP/SWPB emulation handler
[ 0.731204] Loading compiled-in X.509 certificates
[ 0.738166] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 0.738229] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
[ 0.745168] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.745523] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[ 0.745944] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 0.745950] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 0.770581] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.3
[ 0.770683] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.4
[ 0.789007] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.790651] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.792292] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.795237] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.796876] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.800482] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[ 0.806786] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
[ 0.811817] console [netcon0] enabled
[ 0.811825] netconsole: network logging started
[ 0.811833] of_cfs_init
[ 0.811865] of_cfs_init: OK
[ 0.812104] ALSA device list:
[ 0.812113] No soundcards found.
[ 0.821812] Freeing unused kernel memory: 6144K
[ 0.821933] Run /init as init process
[ 0.830114] random: fast init done
[ 0.894942] Checking disk(s): UUID=0106-1615 UUID=f8fb3cf4-a55b-465a-8b04-55bf7c747aef
[ 0.905674] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[ 0.906588] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
[ 0.906957] mmc1: new high speed SDIO card at address 0001
[ 0.908151] mmcblk0: p1 p2
[ 1.030343] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 1.172912] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[ 1.172920] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.172930] usb 1-1: Product: USB2.0 Hub
[ 1.174257] hub 1-1:1.0: USB hub found
[ 1.174571] hub 1-1:1.0: 4 ports detected
[ 1.460341] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
[ 1.557855] usb 1-1.4: New USB device found, idVendor=4037, idProduct=2804, bcdDevice= 1.10
[ 1.557863] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.557870] usb 1-1.4: Product: 2.4G Composite Devic
[ 1.564607] input: 2.4G Composite Devic as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:4037:2804.0001/input/input0
[ 1.620750] hid-generic 0003:4037:2804.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Composite Devic] on usb-0000:01:00.0-1.4/input0
[ 1.628737] input: 2.4G Composite Devic Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:4037:2804.0002/input/input1
[ 1.628976] input: 2.4G Composite Devic Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:4037:2804.0002/input/input2
[ 1.683836] input: 2.4G Composite Devic System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:4037:2804.0002/input/input3
[ 1.683981] hid-generic 0003:4037:2804.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Composite Devic] on usb-0000:01:00.0-1.4/input1
[ 3.612455] fsck: CP437: Invalid argument
[ 3.612606] fsck: STORAGE: recovering journal
[ 3.612744] fsck: fsck.fat 4.1 (2017-01-24)
[ 3.612951] fsck: /dev/mmcblk0p1: 348 files, 18748/65501 clusters
[ 3.613209] fsck: STORAGE: clean, 14884/15460352 files, 26794780/61839360 blocks
[ 4.043697] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.346398] systemd[1]: System time before build time, advancing clock.
[ 4.352988] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 4.353309] systemd[1]: Detected architecture arm.
[ 4.356619] systemd[1]: Set hostname to <LibreELEC>.
[ 4.358154] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 4.473478] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.473766] systemd[1]: Listening on udev Kernel Socket.
[ 4.473991] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.474129] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.474165] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.487704] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 4.488333] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.488925] systemd[1]: Created slice User and Session Slice.
[ 4.489143] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.594740] kernel-overlays-setup: setup base modules
[ 4.646788] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.19.127
[ 4.680654] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[ 4.680790] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[ 4.681451] kernel-overlays-setup: done
[ 4.772970] wireguard: WireGuard 1.0.20200908 loaded. See www.wireguard.com for information.
[ 4.772977] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 4.884422] systemd-journald[214]: Received request to flush runtime journal from PID 1
[ 5.261053] random: crng init done
[ 5.261062] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.913537] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
[ 5.915789] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
[ 5.916109] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
[ 5.916959] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
[ 5.932240] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 5.939418] media: Linux media interface: v0.10
[ 6.017068] Registered IR keymap rc-rc6-mce
[ 6.043783] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 6.049975] IR RC6 protocol handler initialized
[ 6.080447] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver@11/rc/rc0
[ 6.081633] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
[ 6.081746] input: gpio_ir_recv as /devices/platform/ir-receiver@11/rc/rc0/input4
[ 6.084269] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 6.100593] videodev: Linux video capture interface: v2.00
[ 6.150159] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.201579] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.210888] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.246863] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 6.260282] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.264387] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 6.264416] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 6.265150] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 6.270020] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 6.270043] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 6.270592] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.274189] usbcore: registered new interface driver brcmfmac
[ 6.275060] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 6.277400] : bcm2835_codec_get_supported_fmts: port has more encoding than we provided space for. Some are dropped.
[ 6.278291] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 6.278309] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 6.279072] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[ 6.338701] pcm512x 1-004d: 1-004d supply AVDD not found, using dummy regulator
[ 6.338761] pcm512x 1-004d: Linked as a consumer to regulator.0
[ 6.338780] pcm512x 1-004d: 1-004d supply DVDD not found, using dummy regulator
[ 6.338850] pcm512x 1-004d: 1-004d supply CPVDD not found, using dummy regulator
[ 6.382633] snd-rpi-hifiberry-dacplus soc:sound: pcm512x-hifi <-> fe203000.i2s mapping ok
[ 6.404063] IR NEC protocol handler initialized
[ 6.571048] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.586573] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 6.828659] bcmgenet: Skipping UMAC reset
[ 6.887319] uart-pl011 fe201000.serial: no DMA platform data
[ 6.894124] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[ 6.894494] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.956251] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.956271] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 7.752823] input: VNCServer Mouse as /devices/virtual/input/input6
[ 7.755929] input: VNCServer Keyboard as /devices/virtual/input/input7
[ 7.920447] bcmgenet fd580000.genet eth0: Link is Down
[ 8.755657] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 8.760114] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 8.763678] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 8.766734] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 8.769816] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 8.784772] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 8.795483] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 10.064038] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 11.974800] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control off
[ 11.974827] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.997425] 8021q: 802.1Q VLAN Support v1.8
[ 12.222576] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 13.487473] Bluetooth: Core ver 2.22
[ 13.487596] NET: Registered protocol family 31
[ 13.487603] Bluetooth: HCI device and connection manager initialized
[ 13.487629] Bluetooth: HCI socket layer initialized
[ 13.487656] Bluetooth: L2CAP socket layer initialized
[ 13.487692] Bluetooth: SCO socket layer initialized
[ 13.497974] Bluetooth: HCI UART driver ver 2.3
[ 13.497986] Bluetooth: HCI UART protocol H4 registered
[ 13.498063] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 13.498242] Bluetooth: HCI UART protocol Broadcom registered
[ 51.153856] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 84.858342] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 266.198918] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 339.720604] pcm512x 1-004d: No SCLK, using BCLK: -2
[ 475.682406] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jonas
