HiFiBerry Digi+ Pro vanished after upgrading to LibreELEC 10

Hello,

my HiFiBerry Digi+ Pro worked just fine with LibreELEC 9 but LibreELEC 10 can’t find the card.

/flash/config.txt:

# SPDX-License-Identifier: GPL-2.0-or-later
# Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
# Copyright (C) 2016-present Team LibreELEC (https://libreelec.tv)
################################################################################
# Bootloader configuration
# config.txt version v1 (do not remove or change this line!)
################################################################################
# For more options and information see
# http://rpf.io/configtxt
################################################################################

# Default GPU memory split, 76MB are needed for H264 decoder
gpu_mem=76

# Don't send initial active source message.
# Avoids bringing CEC (enabled TV) out of standby and channel switch when
# rebooting.
hdmi_ignore_cec_init=1

################################################################################
# Include distribution specific config file if it exists.
################################################################################
[all]
include distroconfig.txt

# uncomment to enable infrared remote recevier connected to GPIO 18
#dtoverlay=gpio-ir,gpio_pin=18
dtoverlay=hifiberry-digi

# uncomment to enable analog audio output
#dtparam=audio=on
#audio_pwm_mode=1

dtdebug=1

aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: vc4hdmi [vc4-hdmi], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Thanks a lot,
Michael

HiFiBerry team April 07, 2023 16:40

You're using the Digi+ overlay, which is not correct for the Digi+ Pro:
https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/

Michael Sicher April 07, 2023 18:09

Still not working using:

dtoverlay=hifiberry-digi-pro

even when adding

force_eeprom_read=0

dmesg |grep -I hifi and dmesg |grep -i kms-v3d don't return anything.

HiFiBerry team April 08, 2023 06:19

Did you check that the overlay file is there?

Michael Sicher April 25, 2023 18:49

It is:

ls -l /flash/overlays/hifiberry-digi*
-rwxr-xr-x    1 root     root          1125 Jan  7 13:09 /flash/overlays/hifiberry-digi-pro.dtbo
-rwxr-xr-x    1 root     root           959 Jan  7 13:09 /flash/overlays/hifiberry-digi.dtbo

HiFiBerry team April 28, 2023 10:52

Check your logs if the overlay has been loaded at all.

HiFiBerry Digi+ Pro vanished after upgrading to LibreELEC 10

5 comments